You searched for: Adapters, Conical Ground Joints
The shaped adapters with conical ground joints have a multitude of uses including the regulation of gas and liquid flow through a reaction system. These high-quality glass adapters are equipped with connecting joints to be compatible with virtually any reaction system for servicing distillations, providing vacuum regulation and drip connections, or preventing solids from entering solutions, and so much more. The conical ground joint come in standard sizes to snugly fit existing glass instruments.
Airfree® Schlenk 3-Way Connecting Adapters with Two Top and One Lower Joints, Chemglass
Supplier: Chemglass
A three way adapter for the connection of three vessels.
Expand 2 Items
Connecting/Reducing Adapters, Chemglass
Supplier: Chemglass
Adapters are used to connect dissimilar standard taper joint sizes.
Expand 8 Items
Airfree® Schlenk 3-Way Connecting Adapters with One Top and Two Lower Joints, Chemglass
Supplier: Chemglass
A three way adapter for the connection of three vessels.
Expand 2 Items
Full Length Outer Ground Joints, Chemglass
Supplier: Chemglass
Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below the joint.
Expand 15 Items
Inlet Adapters, [ST] Inner Joint, 90° Bend, Chemglass
Supplier: Chemglass
Adapters allow for flexible tubing to be connected to apparatus for introduction of vacuum or pressure.
Expand 2 Items
PYREX® Connecting Tube, Corning
Supplier: Corning
This Connecting Tube is a replacement part for the 6949M series of PYREX® Microchemistry Kits.
Expand 1 Items
Universal Inlet Adapters, Chemglass
Supplier: Chemglass
Adapters have the listed size of Chem-Thread at the top for a vacuum tight seal on a variety of tubing diameters.
Expand 8 Items
Airfree® Schlenk Flushing Adapters, with Septum Stoppers, Chemglass
Supplier: Chemglass
Adapter permits vessels to be purged with an inert gas during sampling or transfer with a cannulas.
Expand 4 Items
Airfree® Adapters, Solid Addition, Chemglass
Supplier: Chemglass
This adapter permits the addition of solids into multi-neck flasks in a dry box, or the addition of non-air sensitive compounds into flasks while purging with an inert atmosphere.
Expand 2 Items
Female Luer Lock Vacuum Adapters, with Stopcock, Chemglass
Supplier: Chemglass
Adapters have a 1/4"–28 thread that accepts a female luer lock adapter. This provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint.
Expand 2 Items
PYREX® Reducing Adapters with [ST] Joints, Corning
Supplier: Corning
PYREX® glass.
Expand 3 Items
Synthware Bushing Adapters, Kemtech America
Supplier: Kemtech America
Bushing adapters allow for compact assemblies of dissimilar joints.
Expand 6 Items
Synthware Adapters with Ball Socket
Supplier: Kemtech America
Ball socket adapter with lower standard taper inner joint.
Expand 2 Items
Medium Length outer Ground Joints, Chemglass
Supplier: Chemglass
Standard taper outer joint tooled on the same diameter tubing as the medium inner joints.
Expand 2 Items
Inlet Adapters, [ST] Outer Joint, Chemglass
Supplier: Chemglass
Adapters allow for flexible tubing to be connected to apparatus for introduction of vacuum or pressure.
Expand 3 Items
Inlet Thermometer Adapters, PTFE, Chemglass
Supplier: Chemglass
These PTFE adapters have an inner joint of the listed size.
Expand 5 Items
Vacuum Filtration Adapters, with PTFE Stopcocks, Chemglass
Supplier: Chemglass
Adapter used for reduced pressure filtrations using plain stem buchner funnels.
Expand 2 Items
Inlet Adapter, Bleed Tube, Chemglass
Supplier: Chemglass
Use this inlet adapter for the introduction of gases or liquids during reactions.
Expand 1 Items
Airfree® Schlenk Connecting Adapters, Styles A and B, Chemglass
Supplier: Chemglass
Connecting adapters available in two different styles to best suit your needs.
Expand 4 Items
Straight Connecting Adapters, [ST] Top Outer and [ST] Lower Inner Joints, Chemglass
Supplier: Chemglass
Used to expand the length of an apparatus. Adapter can also be used as an air condenser. With standard taper top outer and lower inner joint.
Expand 8 Items
Adapters, Rotary Evaporators, Vials, Chemglass
Supplier: Chemglass
Adapters permit the connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator.
Expand 2 Items
Airfree® Flushing Adapters, Chemglass
Supplier: Chemglass
Flushing adapters allow vessels to be flushed with inert gas while sampling directly through the bore of the T-bore stopcock.
Expand 4 Items
Inlet Thermometer Adapters, 10° Offset, Chemglass
Supplier: Chemglass
Adapters have a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7 mm.
Expand 3 Items
Full Length Inner Ground Joints, Chemglass
Supplier: Chemglass
Standard Taper ground inner joints, full length.
Expand 15 Items
Straight Connecting Adapters, [ST] Outer Joints, Chemglass
Supplier: Chemglass
Adapters feature standard taper outer joints at both ends.
Expand 2 Items
Inner Ground Joints, with Hooks, Chemglass
Supplier: Chemglass
Inner joint with two hooks 180° apart just above the grind.
Expand 3 Items
Connecting Adapters, Luer Outer Top and [ST] Inner Joint, Chemglass
Supplier: Chemglass
Adapter has a luer outer on top and a lower standard taper inner joint.
Expand 2 Items
Inlet Adapters, [ST] Joint, 90° Bend, Chemglass
Supplier: Chemglass
Adapters allow PTFE tubing to be connected to apparatus for introduction of vacuum or pressure.
Expand 3 Items
Synthware Drying Tube Adapters, Straight, Kemtech America
Supplier: Kemtech America
Drying tube adapters are used for keeping a reaction vessel free of moisture.
Expand 3 Items
Thermocouple Adapters, Chemglass
Supplier: Chemglass
Adapters feature a Chem-Thread at the top to make a vacuum tight seal.
Expand 5 Items
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: BDH
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: BUSHNELL CORPORATION
Supplier: VWR International
Supplier: VWR International
Supplier: BDH