You searched for: Standards

Supplier: Restek

Contains: N-Nitrosodimethylamine (62-75-9); N-Nitroso-di-n-propylamine (621-64-7); N-Nitrosodiphenylamine (86-30-6)

Supplier: Antyila Scientific

Solutions to maximize meter accuracy.

Supplier: SPEX CERTIPREP LLC

Pesticides, PCBs and Herbicides

The EPA is tasked with the monitoring of environmental systems as they pertain to contamination and human health. The methods issued by the EPA are created to respond to specific toxins or persistent organic pollutants (POPs) found in environmental samples such as soil, source water, drinking water, and waste. In particular, pollutants such as polychlorinated biphenyls (PCBs), which were in widespread industrial use up until their restriction, are of concern due to their stable and persistent nature in the environment. Another group of chemicals of high concern is the hundreds of commercial pesticides and herbicides in use in the world today. Pesticides, from algaecides to virucides, are used in large quantities in industrial and private agriculture. The concern over human pesticide exposure over the past few decades has led to extensive monitoring of these pesticides. It has been reported that over 98% of insecticides and 95% of herbicides affect areas other than their intended target product. It is essential that monitoring agencies have accurate standard mixes to measure the pesticide levels in the environment.

Many new pesticides are now being tested using highly sensitive LC/MS techniques, in addition to traditional GC techniques, to determine minute amounts of residue in environmental samples and food products.

At SPEX CertiPrep, we facilitate ease of monitoring and testing of pesticides by creating pesticide test mixes to suit your monitoring needs. SPEX CertiPrep is the leader in offering pesticide standards designed to work within EPA, AOAC and FDA analytical testing methods using all of the leading analytical techniques: LC, LC/MS, GC, and GC/MS. Many pesticide standard mixes are readily available in our catalog along with a large list of single pesticide standards. In addition, custom pesticide mixes can be made to your specifications to create a mix that meets your needs.

US EPA Method 531 is an analytical method for the monitoring of n-methylcarbamoyloximes and n-methylcarbamates in drinking water and ground water by HPLC and a fluorescence detector

Supplier: ERA

One 2 Ml Flame-Sealed Ampule Requires Spiking Onto The Ten Grams Of Provided Certified Clean Soil. Includes All The Btex Compounds And Mtbe At 20-200 Ug/Kg (40-400 Ug/Kg For Total Xylenes).

Supplier: SPEX CERTIPREP LLC

Analytical Standards for Medicinal and Recreational Cannabis Testing
Terpenes

While the legalization of cannabis for both medicinal and recreational purposes has been gaining speed, legislation and regulation has not necessarily kept pace. Out of a drive for self-regulation and significant consumer safety concerns, many producers and manufacturers are turning to testing labs in order to ensure that their products are of high quality and free of chemical contaminants.

SPEX CertiPrep offers ISO/IEC 17025 and ISO 17034 Certified Reference Materials (CRMs) for all of the common contaminants such as pesticide residues, residual solvents and heavy metals, as well as qualitative analysis CRMs, such as terpenes. As the
industry demands change and regulations are put into place, we continually update our product offering.

Designed for Methods: State specific pesticide regulations:
• OAR 333-008-11
• HB 3460
• AOAC 2007-01
• EN 15662

Supplier: Restek

Derivatized Form: DCAA methyl ester (2,4-dichlorophenyl acetic acid methyl ester). 200ug/mL in hexane, 1mL/ampule.

Supplier: Restek

Transportable pure gases and mixtures are ideal for peak identification work.

Supplier: Restek

TCLP acid mix contains 2-methylphenol (o-cresol), 3-methylphenol (m-cresol), 4-methylphenol (p-cresol), pentachlorophenol, 2,4,5-trichlorophenol, 2,4,6-trichlorophenol.

Supplier: Restek

Mix contains: Carbon tetrachloride (56-23-5), Chlorobenzene (108-90-7), Chloroform (67-66-3), 1,1-Dichloroethane (75-34-3), 1,1-Dichloroethene (75-35-4), 1,2-Dichloropropane (78-87-5), Methylene chloride (dichloromethane) (75-09-2), 1,1,2-Trichloroethane (79-00-5), Trichloroethene (79-01-6), m-Xylene (108-38-3).

Supplier: SPEX CERTIPREP LLC

Pesticides, PCBs and Herbicides

The EPA is tasked with the monitoring of environmental systems as they pertain to contamination and human health. The methods issued by the EPA are created to respond to specific toxins or persistent organic pollutants (POPs) found in environmental samples such as soil, source water, drinking water, and waste. In particular, pollutants such as polychlorinated biphenyls (PCBs), which were in widespread industrial use up until their restriction, are of concern due to their stable and persistent nature in the environment. Another group of chemicals of high concern is the hundreds of commercial pesticides and herbicides in use in the world today. Pesticides, from algaecides to virucides, are used in large quantities in industrial and private agriculture. The concern over human pesticide exposure over the past few decades has led to extensive monitoring of these pesticides. It has been reported that over 98% of insecticides and 95% of herbicides affect areas other than their intended target product. It is essential that monitoring agencies have accurate standard mixes to measure the pesticide levels in the environment.

Many new pesticides are now being tested using highly sensitive LC/MS techniques, in addition to traditional GC techniques, to determine minute amounts of residue in environmental samples and food products.

At SPEX CertiPrep, we facilitate ease of monitoring and testing of pesticides by creating pesticide test mixes to suit your monitoring needs. SPEX CertiPrep is the leader in offering pesticide standards designed to work within EPA, AOAC and FDA analytical testing methods using all of the leading analytical techniques: LC, LC/MS, GC, and GC/MS. Many pesticide standard mixes are readily available in our catalog along with a large list of single pesticide standards. In addition, custom pesticide mixes can be made to your specifications to create a mix that meets your needs.

US EPA Method 8081 is an analytical method for the monitoring of organochlorine pesticides and PCBs in environmental samples by GC/ECD

Supplier: Advanced Instruments

This reference solution is used to check for instrument drift before each shift, to monitor operators’ techniques, to bracket unknown sample runs, and to verify and diagnose erratic results.

Supplier: Cargille Laboratories

Refractive index liquids have a broad range of applications in diversified fields.

Supplier: Restek

This mix contains 16 components.

Supplier: Restek

SV Calibration mix #4 contains carbazole (86-74-8); dibenzofuran (132-64-9); diethyl phthalate (84-66-2); 2,4-dinitrotoluene (121-14-2); 2,6-dinitrotoluene (606-20-2); hexachlorobenzene (118-74-1); hexachlorobutadiene (87-68-3); hexachlorocyclopentadiene (77-47-4); hexachloroethane (67-72-1); isophorone (78-59-1); 2-methylnaphthalene (91-57-6); nitrobenzene (98-95-3); 1,2,4-trichlorobenzene (120-82-1).

Supplier: Restek

Contains: Benzene (71-43-2); Carbon tetrachloride (56-23-5); 1,4-Dichlorobenzene (106-46-7); 1,2-Dichloroethane (107-06-2); 1,1-Dichloroethene (75-35-4); 1,1,1-Trichloroethane (71-55-6); Trichloroethene (79-01-6); Vinyl chloride (75-01-4)

Supplier: Restek

For the infrared spectrophotometric method for the determination of Total Recoverable Petroleum Hydrocarbons.

Supplier: Restek

benzene, ethylbenzene, methyl-tert-butyl ether, naphthalene. toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene,m-xylene. o-xylene, p-xylene. 1,000ug/mL ea. in P & T methanol, 1mL/ampule.

Supplier: Restek

These calibration mixtures are made with pure, highly characterized neat material and are prepared using NIST-traceable balances and weights. Each ampul is supplied with a data sheet indicating the exact concentration and a sample chromatogram.

Supplier: Restek

Mix contains: 1,2-Dibromo-3-chloropropane (DBCP) (96-12-8), 1,2-Dibromoethane (EDB) (106-93-4).

Supplier: Restek

The mix consists of acetonitrile 2.05 mg/ml), chlorobenzene (1.8 mg/ml), cyclohexane (19.4 mg/ml), cis-1,2-dichloroethene (4.675 mg/ml), trans-1,2-dichloroethene (4.675 mg/ml), 1,4-dioxane (1.9 mg/ml), ethylbenzene (1.84 mg/ml), isopropylbenzene (cumene) (0.35 mg/ml), methanol (15 mg/ml), methylcyclohexane (5.9 mg/ml), methylene chloride (dichloromethane) (3 mg/ml), tetrahydrofuran (3.6 mg/ml), toluene (4.45 mg/ml), m-xylene (6.51 mg/ml), o-xylene (0.98 mg/ml), p-xylene (1.52 mg/ml).

Supplier: SPEX CERTIPREP LLC

Pesticides, PCBs and Herbicides

The EPA is tasked with the monitoring of environmental systems as they pertain to contamination and human health. The methods issued by the EPA are created to respond to specific toxins or persistent organic pollutants (POPs) found in environmental samples such as soil, source water, drinking water, and waste. In particular, pollutants such as polychlorinated biphenyls (PCBs), which were in widespread industrial use up until their restriction, are of concern due to their stable and persistent nature in the environment. Another group of chemicals of high concern is the hundreds of commercial pesticides and herbicides in use in the world today. Pesticides, from algaecides to virucides, are used in large quantities in industrial and private agriculture. The concern over human pesticide exposure over the past few decades has led to extensive monitoring of these pesticides. It has been reported that over 98% of insecticides and 95% of herbicides affect areas other than their intended target product. It is essential that monitoring agencies have accurate standard mixes to measure the pesticide levels in the environment.

Many new pesticides are now being tested using highly sensitive LC/MS techniques, in addition to traditional GC techniques, to determine minute amounts of residue in environmental samples and food products.

At SPEX CertiPrep, we facilitate ease of monitoring and testing of pesticides by creating pesticide test mixes to suit your monitoring needs. SPEX CertiPrep is the leader in offering pesticide standards designed to work within EPA, AOAC and FDA analytical testing methods using all of the leading analytical techniques: LC, LC/MS, GC, and GC/MS. Many pesticide standard mixes are readily available in our catalog along with a large list of single pesticide standards. In addition, custom pesticide mixes can be made to your specifications to create a mix that meets your needs.

US EPA Method 508 is an analytical method for the monitoring of organochlorine pesticides and PCBs in drinking water and ground water by GC/ECD

Supplier: Restek

Consists of 11 components, those are bromoxynil, 2,4-d, dicamba, 2,4-dichlorophenol, diclofop methyl, dinoseb, pentachlorophenol, picloram, 2,4,5-t, 2,3,4,6-tetrachlorophenol and 2,4,6-trichlorophenol.

Supplier: Restek

Contains: Chlorobenzene (108-90-7); 1,2-Dichlorobenzene (95-50-1); cis-1,2-Dichloroethene (156-59-2); trans-1,2-Dichloroethene (156-60-5); 1,2-Dichloropropane (78-87-5); Ethylbenzene (100-41-4); Styrene (100-42-5); Tetrachloroethene (127-18-4); Toluene (108-88-3); m-Xylene (108-38-3); o-Xylene (95-47-6); p-Xylene (106-42-3)

Supplier: Restek

Consists of nine components, those are azinphos methyl, chlorpyrifos, diazinon, dimethoate, malathion, parathion, phorate, temephos and terbufos .

Supplier: SPEX CERTIPREP LLC

Analytical Standards for Medicinal and Recreational Cannabis Testing
Pesticide Residues

While the legalization of cannabis for both medicinal and recreational purposes has been gaining speed, legislation and regulation has not necessarily kept pace. Out of a drive for self-regulation and significant consumer safety concerns, many producers and manufacturers are turning to testing labs in order to ensure that their products are of high quality and free of chemical contaminants.

SPEX CertiPrep offers ISO/IEC 17025 and ISO 17034 Certified Reference Materials (CRMs) for all of the common contaminants such as pesticide residues, residual solvents and heavy metals, as well as qualitative analysis CRMs, such as terpenes. As the
industry demands change and regulations are put into place, we continually update our product offering.

Designed for Methods: State specific pesticide regulations:
• OAR 333-008-11
• HB 3460
• AOAC 2007-01
• EN 15662

Supplier: Restek

This mixture can be used for quantification (AOCS Method CE 1a–13) and approximate the compositions of the types of oils like olive, teaseed, and neatsfoot oil.

Supplier: Restek

Mix contains: Allyl alcohol (2-propen-1-ol) (107-18-6); 2-Chloroethanol (107-07-3); Ethanol (64-17-5); Isobutyl alcohol (78-83-1); Propargyl alcohol (107-19-7).

Supplier: Restek

Mix contains Acifluorfen methyl ester, Bentazon methyl ester, Chloramben methyl ester, Dalapon methyl ester, 2,4-D methyl ester, 2,4-DB methyl ester, DCPA methyl ester (Chlorthal-dimethyl), Dicamba methyl ester, 3,5-Dichlorobenzoic acid methyl ester, Dichlorprop methyl ester, Dinoseb methyl ether, Pentachloroanisole, Picloram methyl ester, Quinclorac methyl ester, 2,4,5-T methyl ester, 2,4,5-TP.

Supplier: Restek

Contains: (C5) n-Pentane (109-66-0), 1,000 µg/mL; (C9) n-Nonane (111-84-2), 1,000 µg/mL; Benzene (71-43-2), 500 µg/mL; Ethylbenzene (100-41-4), 500 µg/mL; 2-Methylpentane (107-83-5), 1,500 µg/mL; Methyl tert-butyl ether (MTBE) (1634-04-4), 1,500 µg/mL; Naphthalene (91-20-3), 1,000 µg/mL; Toluene (108-88-3), 1,500 µg/mL; 1,2,4-Trimethylbenzene (95-63-6), 1,000 µg/mL; 2,2,4-Trimethylpentane (isooctane) (540-84-1), 1,500 µg/mL; m-Xylene (108-38-3), 1,000 µg/mL; o-Xylene (95-47-6), 1,000 µg/mL; p-Xylene (106-42-3), 1,000 µg/mL

Supplier: Restek

The compund consists of components such as, acenaphthene (100 μg/ml), acenaphthylene (100 μg/ml), anthracene (100 μg/ml), benz(a)anthracene (10 μg/ml), benzo(a)pyrene (10 μg/ml), benzo(b)fluoranthene (10 μg/ml), benzo(ghi)perylene (10 μg/ml), benzo(k)fluoranthene (5 μg/ml), chrysene (10 μg/ml), dibenz(a,h)anthracene (10 μg/ml), fluoranthene (10 μg/ml), fluorene (100 μg/ml), indeno(1,2,3-cd)pyrene (10 μg/ml), 1-methylnaphthalene (100 μg/ml), 2-methylnaphthalene (100 μg/ml), naphthalene (100 μg/ml), phenanthrene (100 μg/ml), pyrene (10 μg/ml).