You searched for: Standards

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: Restek

Contains: N-Nitrosodimethylamine (62-75-9); N-Nitroso-di-n-propylamine (621-64-7); N-Nitrosodiphenylamine (86-30-6)

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: Restek

This mix contains 16 components.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: Restek

Contains: Chloroform (67-66-3); 1,1-Dichloroethene (75-35-4); 1,2-Dichloropropane (78-87-5); Ethylbenzene (100-41-4); Toluene (108-88-3); Vinyl chloride (75-01-4)

Supplier: SPEX CERTIPREP LLC

Semivolatiles

US EPA Method 625 is an analytical method for the monitoring of acid and base neutral extractable fractions in municipal and industrial wastewater by GC/MS.

US EPA Method 8270 is a general analytical method for the monitoring of semivolatiles in environmental and waste samples by GC/MS.

Supplier: Thermo Scientific Chemicals

Physical Form: Liquid
MDL No.: MFCD01867801

Supplier: Restek

Mix contains: Benzene (71-43-2); Chlorobenzene (108-90-7); 1,2-Dichlorobenzene (95-50-1); 1,3-Dichlorobenzene (541-73-1); 1,4-Dichlorobenzene (106-46-7); Ethylbenzene (100-41-4); Toluene (108-88-3); m-Xylene (108-38-3); o-Xylene (95-47-6); p-Xylene (106-42-3).

Supplier: Restek

These calibration mixtures are made with pure, highly characterized neat material and are prepared using NIST-traceable balances and weights. Each ampul is supplied with a data sheet indicating the exact concentration and a sample chromatogram.

Supplier: Atago

Sucrose solutions are used for confirming the Brix measurements of refractometers.

Supplier: Restek

Mix Contains: Carbon disulfide (75-15-0); Chloroacetonitrile (107-14-2); 1-Chlorobutane (Butyl chloride) (109-69-3); trans-1,4-Dichloro-2-butene (110-57-6); 1,1-Dichloro-2-propanone (513-88-2); Diethyl ether (ethyl ether) (60-29-7); Hexachloroethane (67-72-1); Iodomethane (methyl iodide) (74-88-4); Methacrylonitrile (126-98-7); Methyl tert-butyl ether (MTBE) (1634-04-4); 2-Nitropropane (79-46-9); Propionitrile (107-12-0).

Supplier: Restek

Contains: Acenaphthene (83-32-9); Acenaphthylene (208-96-8); Anthracene (120-12-7); Benz(a)anthracene (56-55-3); Benzo(a)pyrene (50-32-8); Benzo(b)fluoranthene (205-99-2); Benzo(ghi)perylene (191-24-2); Benzo(k)fluoranthene (207-08-9); Chrysene (218-01-9); Dibenz(a,h)anthracene (53-70-3); Fluoranthene (206-44-0); Fluorene (86-73-7); Indeno(1,2,3-cd)pyrene (193-39-5); 1-Methylnaphthalene (90-12-0); 2-Methylnaphthalene (91-57-6); Naphthalene (91-20-3); Phenanthrene (85-01-8); Pyrene (129-00-0)

Supplier: Restek

Contains 1 ml each of these mixtures: 524 calibration mix #7A, 524 calibration mix #7B. calibration mix #7A contains Acetone (67-64-1), 2-Butanone (MEK) (78-93-3), 2-Hexanone (591-78-6), 4-Methyl-2-pentanone (MIBK) (108-10-1), Tetrahydrofuran (109-99-9); calibration mix #7B contains Acrylonitrile (107-13-1)
Allyl chloride (3-chloropropene) (107-05-1), Ethyl methacrylate (97-63-2), Methyl acrylate (96-33-3), Methyl methacrylate (80-62-6), Nitrobenzene (98-95-3), Pentachloroethane (76-01-7).

Supplier: Restek

This mix contains four components.

Supplier: Restek

Contains: (C10) n-Decane (124-18-5); (C11) n-Undecane (1120-21-4); (C12) n-Dodecane (112-40-3); (C13) n-Tridecane (629-50-5); (C14) n-Tetradecane (629-59-4); (C15) n-Pentadecane (629-62-9); (C16) n-Hexadecane (544-76-3); (C17) n-Heptadecane (629-78-7); (C18) n-Octadecane (593-45-3); (C19) n-Nonadecane (629-92-5); (C20) n-Eicosane (112-95-8); (C21) n-Heneicosane (629-94-7); (C22) n-Docosane (629-97-0); (C23) n-Tricosane (638-67-5); (C24) n-Tetracosane (646-31-1); (C25) n-Pentacosane (629-99-2)

Supplier: Restek

Contains: Benzoic acid (65-85-0); 4-Chloro-3-methylphenol (59-50-7); 2-Chlorophenol (95-57-8); 2,4-Dichlorophenol (120-83-2); 2,6-Dichlorophenol (87-65-0); 2,4-Dimethylphenol (105-67-9); 4,6-Dinitro-2-methylphenol (Dinitro-o-cresol) (534-52-1); 2,4-Dinitrophenol (51-28-5); Dinoseb (88-85-7); 2-Methylphenol (o-cresol) (95-48-7); 3-Methylphenol (m-cresol) (108-39-4); 4-Methylphenol (p-cresol) (106-44-5); 2-Nitrophenol (88-75-5); 4-Nitrophenol (100-02-7); Pentachlorophenol (87-86-5); Phenol (108-95-2); 2,3,4,6-Tetrachlorophenol (58-90-2); 2,4,5-Trichlorophenol (95-95-4); 2,4,6-Trichlorophenol (88-06-2)

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: Restek

Mix contains: Benzene (71-43-2), Chlorobenzene (108-90-7), 1,2-Dichlorobenzene (95-50-1), 1,3-Dichlorobenzene (541-73-1), 1,4-Dichlorobenzene (106-46-7), Ethylbenzene (100-41-4), Toluene (108-88-3).

Supplier: Restek

612 Chlorinated hydrocarbons calibration mix contains 2-chloronaphthalene, 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,4-dichlorobenzene, hexachlorobenzene, hexachlorobutadiene, hexachlorocyclopentadiene, hexachloroethane, 1,2,4-trichlorobenzene.

Supplier: SPEX CERTIPREP LLC

Volatiles

CLP Series Methods: The US EPA retains analytical services through the Contract Laboratory Program (CLP). The CLP follows detailed SOPs derived from EPA methods and SW-846. The CLP Volatile Organic Analysis Method is an analytical method for the analysis of aqueous or solid samples for VOCs by GC/MS.

Supplier: Restek

Contains 1 ml each of the following mixtures, SV calibration mix #1 (anilines), SV calibration mix #2 (phenols), SV calibration mix #3 (base neutrals), SV calibration mix #4 (base neutrals), SV calibration mix #5 (PAHs), SV calibration mix #7 (dichlorobenzenes) and 605 benzidines calibration mix (benzidine and 3,3'-dichlorobenzidine).

Supplier: Restek

610 PAH calibration mix A contains acenaphthene (1000 μg/ml), acenaphthylene (1000 μg/ml),anthracene (1000 μg/ml), benz(a)anthracene (500 μg/ml), benzo(a)pyrene (500 μg/ml), benzo(b)fluoranthene (500 μg/ml)
benzo(k)fluoranthene (500 μg/ml), benzo(ghi)perylene (500 μg/ml), chrysene (500 μg/ml), dibenz(a,h)anthracene (500 μg/ml), fluoranthene (500 μg/ml), fluorene (1000 μg/ml), indeno(1,2,3-cd)pyrene (500 μg/ml), naphthalene (1000 μg/ml), phenanthrene (500 μg/ml), pyrene ( 500 μg/ml).

Supplier: Restek

Contains: Aramite (140-57-8); Bis(2-chloroethyl)ether (111-44-4); Bis(2-chloroethoxy)methane (111-91-1); 4-Bromophenyl phenyl ether (101-55-3); Chlorobenzilate (510-15-6); 2-Chloronaphthalene (91-58-7); 4-Chlorophenyl phenyl ether (7005-72-3); 1,2-Dichlorobenzene (95-50-1); 1,3-Dichlorobenzene (541-73-1); 1,4-Dichlorobenzene (106-46-7); 1,3-Dinitrobenzene (99-65-0); Hexachlorobenzene (118-74-1); Hexachlorobutadiene (87-68-3); Hexachlorocyclopentadiene (77-47-4); Hexachloroethane (67-72-1); Hexachloropropene (1888-71-7); Isodrin (465-73-6); Kepone (143-50-0); 2,2'-Oxybis(1-chloropropane) (108-60-1); Pentachlorobenzene (608-93-5); Pentachloronitrobenzene (quintozene) (82-68-8); 1,2,4,5-Tetrachlorobenzene (95-94-3); 1,2,4-Trichlorobenzene (120-82-1)

Supplier: SPEX CERTIPREP LLC

Analytical Standards for Medicinal and Recreational Cannabis Testing
Pesticide Residues

While the legalization of cannabis for both medicinal and recreational purposes has been gaining speed, legislation and regulation has not necessarily kept pace. Out of a drive for self-regulation and significant consumer safety concerns, many producers and manufacturers are turning to testing labs in order to ensure that their products are of high quality and free of chemical contaminants.

SPEX CertiPrep offers ISO/IEC 17025 and ISO 17034 Certified Reference Materials (CRMs) for all of the common contaminants such as pesticide residues, residual solvents and heavy metals, as well as qualitative analysis CRMs, such as terpenes. As the
industry demands change and regulations are put into place, we continually update our product offering.

Designed for Methods: State specific pesticide regulations:
• OAR 333-008-11
• HB 3460
• AOAC 2007-01
• EN 15662

Supplier: SPEX CERTIPREP LLC

Validate analytical methods and evaluate the quality of your results with certified reference materials.

Supplier: Restek

benzene, ethylbenzene, methyl-tert-butyl ether, naphthalene. toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene,m-xylene. o-xylene, p-xylene. 1,000ug/mL ea. in P & T methanol, 1mL/ampule.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.

Supplier: SPEX CERTIPREP LLC

Meet or exceed performance criteria with QC samples.