You searched for: Distillation Components

Supplier: Chemglass

Modified Dean-Stark receiver designed for solvents that are either lighter or heavier than water.

Supplier: Kemtech America

Column length is measured from the highest to lowest indent in the column.

Supplier: Chemglass

Jacketed fractionation distilling head for use under vacuum.

Supplier: United Scientific Supplies

Short path Distillation Head with 24/40 flask joints and 10/30 thermometer port.

Supplier: Thermo Fisher Scientific

This self-contained, compact unit produces 1.5 L of high-purity water per hour.

Supplier: Chemglass

Cylindrical for use with ChemRxnHub™ benchtop systems for collecting distillate.

Supplier: Chemglass

Compact and simple distilling/splitter adapter for use with process reactors lids that have a 10° angled side neck.

Supplier: Kemtech America

For use with Kuderna-Danish flask.

Supplier: Kemtech America

Vacuum-jacketed Vigreux distillation heads feature a sealed-on condenser and are braced for strength

Supplier: Kemtech America

Distillation head with condenser sealed to a Vigreux column

Supplier: Kemtech America

Tubes are graduated from 0 to 3 ml in 0.2 ml subdivisions.

Supplier: Kemtech America

Cow-type design features three receivers spaced 40° apart and a 105° angle between top outer joint and lower inner joints.

Supplier: Kemtech America

Hickman-Hinkle still head with threaded side port for syringe access.

Supplier: Kemtech America

Microscale solvent reflux still with [ST] 14/20 joints, 2 mm PTFE stopcock, two-neck flask, and side port for removal of solvent.

Supplier: Kemtech America

Adapter accommodates thermometer in threaded port.

Supplier: Chemglass

Distillation columns feature water jacket.

Supplier: Corning

This Hickman Still Head is a replacement part for the 6949M series of PYREX® microchemistry kits.

Supplier: Wards

This simple distillation apparatus is made up of boroscilicate glass.

Supplier: Kemtech America

Synthware 105° bent distillation adapter.

Supplier: Kemtech America

Still features a syringe port with a [ST] 14/20 outer joint for a rubber septum and a 4 mm PTFE stopcock.

Supplier: Kemtech America

Similar to repurification solvent still (see 60004-750 series), the solvent still head features a drip tip on the delivery port in addition to the [ST] 14/20 inner joint.

Supplier: Kemtech America

Designed to provide excellent solvent and chemical resistance, the still is equipped with two 0-4 mm high vacuum valves.

Supplier: Chemglass

Similar in design to the AF-0720 solvent distillation apparatus, but without a delivery adapter.

Supplier: DWK Life Sciences (KIMBLE)

Vigreux distilling column with indentations over the entire length for improved vapor-liquid contact.

Supplier: General Glass Blowing

The Self Evacuating Cash Still complies with the AOAC method to determine Acidity (Total Volatile) of wines. The steam chamber is heated by an 800 watt immersion coil that heats the distilled water to a boiling point in about 3 to 4 minutes.

Supplier: Chemglass

Adapter is used to connect a distilling column with vertical condensers.

Supplier: Chemglass

Adapters have a tubulation at the top for use with rubber fitting.

Supplier: Chemglass

Similar to CG-1241 but with the Vigreux column vacuum jacketed to improve distillation performance.

Supplier: Chemglass

This moisture test receiver is used to determine the water content in petroleum and bituminous material.

Supplier: Chemglass

Distilling receivers feature a overflow tube.