You searched for: Distillation Components

Supplier: Ace Glass

Distilling head sits on top of your vapor path column. Has condenser side arm with drip tip.

Supplier: Ace Glass

This column has a reinforced outer [ST] joint at top and a ground inner [ST] joint at bottom

Supplier: Ace Glass

This Vigreux distillation column has a male drip tip on the joint of the Claisen side arm, and a [ST] 10/30 joint for a 25mm immersion thermometer

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Kemtech America

Rotating distillation receiver allows four fractions to be collected.

Supplier: Ace Glass

Adapter's top joint is a combination cap, thread and joint to accommodate and seal other microscale apparatus.

Supplier: Ace Glass

Modified Bidwell & Sterling type with overflow to allow excess solvent to return to boiling flask

Supplier: DWK Life Sciences (KIMBLE)

Apparatus used in general purpose distillation and phenol distillation

Supplier: Ace Glass

This magnetically operated swinging funnel type, jacketed distillation head has a totally enclosed iron slug

Supplier: SP Industries

Calibrated “to contain” at 20°C, these distilling receivers are used for determination of water in various materials by distillation with a solvent that is not miscible with water.

Supplier: Ace Glass

Adapters feature a top outer [ST] joint, bottom inner [ST] joint, and side inner [ST] joint

Supplier: Ace Glass

This is a microscale size solvent still that allows continuous reflux of solvents with stopcock open and collection of pure solvent when closed

Supplier: Ace Glass

This Claisen-style adapter features a parallel sidearm.

Supplier: Ace Glass

The distilling trap adapter is used to prevent carryover of reactions that have a tendency to foam.

Supplier: Ace Glass

This distillate take-off adapter has a 105° angle.

Supplier: Ace Glass

This microscale Hickman still head is used to carry out micro-sample fractional distillations

Supplier: Ace Glass

Vigreux columm for vacuum distillation of high boiling materials

Supplier: Ace Glass

Short-path still distribution receiver with #11 Ace-Thred vacuum port.

Supplier: Kemtech America

Distillation adapter accommodates a 76 mm immersion thermometer.

Supplier: DWK Life Sciences (KIMBLE)

These extended 105° bent distillation adapters with vacuum take-off and outer hose connection.

Supplier: Ace Glass

Replacement borosilicate glass components for Buchi® R-220, R-220EX, and R-220SE rotary evaporators

Supplier: Ace Glass

This distillation apparatus is used for methoxy determination as described in U.S

Supplier: Ace Glass

This is a versatile unit that can be used as a solvent recovery still for azeotropic separations of solvents, either heavier or lighter than water

Supplier: Ace Glass

Short-Path distillation head with integral vigreux vapor path column.

Supplier: Ace Glass

Used for the removal of solvents or other volatiles by vacuum distillation at ambient temperature

Supplier: Ace Glass

The Reflux/Distillation Splitter is used to allow easy switching of the distilate path by means of adjusting the valve position to either open or closed.

Supplier: DWK Life Sciences (KIMBLE)

Bent 105° distillation adapters.

Supplier: SP Industries

These distilling receivers are provided with an additional solvent return line which avoids recycling condensate to the flask.

Supplier: Ace Glass

The top joint of this adapter is a combination cap, thread and a standard taper joint to accommodate and seal other microscale apparatus.