You searched for: Distillation Components

Supplier: MilliporeSigma

ReCycler™ is a bulk delivery system that guarantees consistent solvent quality and availability

Supplier: Glassco

Claisen adapters provide dual entry into a variety of flasks.

Supplier: Glassco

Adapters are equipped with standard taper outer joint at the top, and inner joints on the bottom and sidearm.

Supplier: Glassco

Adapter is equipped with an inner drip joint at the bottom and an outer joint at the top.

Supplier: Glassco

This distillation adapter is designed to accommodate an immersion thermometer.

Supplier: Glassco

Distilling Receivers have a 135° angle between the center line of the condenser and the receiver tubes

Supplier: Glassco

Distribution adapter, 24/40, Cow-type design features three receivers spaced 40° apart.

Supplier: Glassco

This trap adapter is placed above the flask to prevent carry-over of reactions which have a tendency to foam.

Supplier: MilliporeSigma

Supplier: DWK Life Sciences (KIMBLE)

Use connecting [ST] adapter as a component in atmospheric or vacuum distillations.

Supplier: DWK Life Sciences (KIMBLE)

Distilling adapter is useful in the sub-boiling separation of mixtures with volatile components.

Supplier: DWK Life Sciences (KIMBLE)

This receiver is a component of the distillation apparatus.

Supplier: Ace Glass

Used to determine heavier-than-water, co-distilling solvent component content of reaction mixture

Supplier: Glassco

This Distillation Adapter is also designed for use as a rotary evaporator washer.

Supplier: Kemtech America

Use distillation connecting adapter as a component in atmospheric or vacuum distallations.

Supplier: United Scientific Supplies

These kits contain essential components for short path distillation.

Supplier: DWK Life Sciences (KIMBLE)

Placed above a boiling flask to prevent foaming-type reactions from entering either the distilling column or the condenser.

Supplier: Kemtech America

Designed without a hose connection for use with a distillation apparatus (see 60002-116 series).

Supplier: Ace Glass

This short path still is designed to be effective with high boiling materials at low pressures, where moderate foaming, as well as slight bumping, can be tolerated

Supplier: DWK Life Sciences (KIMBLE)

These components are used for Midi-Vap 3000 distillation systems which are designed to support the semiautomatic colorimetry methods for drinking, ground, surface and saline waters - as well as domestic and industrial wastes.

Supplier: SP Industries

With side arm at angle of 75° from lower part of main tube, these borosilicate glass distilling adapters have three standard taper joints of the same size.

Supplier: Ace Glass

Reflux distillation splitter adapter for all sizes of reactors

Supplier: Ace Glass

This is a borosilicate glass solvent distillation head designed to maintain solvents or vapors in an no-air atmosphere

Supplier: Ace Glass

The Kjeldahl trap adapter is used to prevent carryover of reactions that have a tendency to foam.

Supplier: DWK Life Sciences (KIMBLE)

This distillation bent adapters with tapered drip tube.

Supplier: DWK Life Sciences (KIMBLE)

Jacketed distillation columns are manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.

Supplier: DWK Life Sciences (KIMBLE)

This close-coupled condenser and vacuum connection distillation head offers an extremely short condensate travel path.

Supplier: Ace Glass

Used in phosphorus determination

Supplier: Ace Glass

This distillation receiver is calibrated to contain

Supplier: Ace Glass

The apparatus is graduated to 15mL in 1/10mL subdivisions, with the lower 0.5mL contained in a precision tip for better accuracy with extremely small samples