You searched for: Distillation Components

Supplier: Ace Glass

Reflux distillation splitter adapter for all sizes of reactors

Supplier: Ace Glass

This is a borosilicate glass solvent distillation head designed to maintain solvents or vapors in an no-air atmosphere

Supplier: Ace Glass

The apparatus is graduated to 15mL in 1/10mL subdivisions, with the lower 0.5mL contained in a precision tip for better accuracy with extremely small samples

Supplier: Ace Glass

This distillation receiver is calibrated to contain

Supplier: Ace Glass

Used in phosphorus determination

Supplier: Ace Glass

The Kjeldahl trap adapter is used to prevent carryover of reactions that have a tendency to foam.

Supplier: DWK Life Sciences (KIMBLE)

Adapter has an “O” ring that holds a thermometer or gas inlet tube securely.

Supplier: Ace Glass

This distillation receiver apparatus features three 25mL flasks that are in the same plane, rotated about the condenser axis

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Kemtech America

Synthware 105° bent distillation adapter.

Supplier: Kemtech America

This Claisen-style adapter provides dual entry into a variety of flasks.

Supplier: Ace Glass

This apparatus is a compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation

Supplier: Ace Glass

This Barrett-type moisture test receiver is used to determine the water content in petroleum and bituminous material

Supplier: Ace Glass

Microscale Claisen Adapter head is often used to facilitate syringe addition of reagents to sealed or moisture-sensitive systems.

Supplier: Ace Glass

This plain distillation column has an I.D

Supplier: Ace Glass

This borosilicate glass connecting tube features an 0-4 Hi-Vac valve assembly for setting up Schlenk lines

Supplier: Ace Glass

This distilling adapter has a 75° angle bend.

Supplier: Ace Glass

One liter Barrett type moisture test receiver

Supplier: Ace Glass

With return line to allow excess solvent to return to boiling flask

Supplier: SP Industries

This borosilicate glass three-way adapter has a Standard Taper 10/30 outer joint on top to accommodate a thermometer, bottom inner Standard Taper 24/40 joint, and 75° angle inner side joint of same size.

Supplier: SP Industries

This distilling apparatus is used to determine volatile oil in drugs by distillation of a weighed quantity of drug in contact with water.

Supplier: Ace Glass

This alginates assay apparatus is similar to the system described in US Pharmacopeia, 2006, chapter 311

Supplier: Ace Glass

This Markham Still distillation apparatus is used for volatile fatty acid tests

Supplier: Ace Glass

Receiver is graduated in 1mL subdivisions

Supplier: Ace Glass

When attached to the top of Snyder Column, this solvent recovery still is designed to recover solvent normally lost during Kuderna-Danish Evaporative Concentrations

Supplier: Ace Glass

This variable reflux ratio distillation head is constructed so that satisfactory operation can be maintained under any pressure condition

Supplier: Kemtech America

Claisen joint adapter for microscale applications

Supplier: Ace Glass

This short path, minimum hold-up still is supplied with a one-piece, 89074-366 "cow" receiver with four 3 mL arms

Supplier: SP Industries

Designed for oils lighter than water, this distilling apparatus is made of borosilicate glass and consists of a Clevenger-type trap with a Standard Taper 24/40 outer joint on top and same size inner joint the sidearm

Supplier: Kemtech America

The three inlets of this adapter allow for multiple entries into a single neck flask.