You searched for: Presaturated Cleanroom Wipes

Supplier: VWR International

Premoistened wipers are designed for environmentally sensitive areas, and are ideal for wiping optical parts, delicate glassware, electrodes, cuvettes, microscopes, and lenses.

Supplier: VWR International

These Spec-Wipes are designed for cleaning laminar flow benches, cleanroom surfaces, and general process equipment.

Supplier: VWR International

These Spec-Wipes are excellent for cleaning rough, abrasive, or irregular surfaces, yet soft enough for delicate surfaces.

Supplier: Berkshire

SatPax® Polx® Nonwoven is a 100% polyester hydroentangled nonwoven wiper recommended for ISO Class 5 and above environments. It is an extremely soft and pliable wiper ideal for all types of sensitive surfaces and an excellent choice for wrapping delicate parts for protection.

Supplier: Contec

A replacement canister for the SATWipes® 6×9" rolls saturated with IPA greater than 70%.

Supplier: Contec

Nonwoven wipers designed for cleaning laminar flow workbenches, cleanroom surfaces, and equipment.

Supplier: Contec

100% interlock knit standard weight textured polyester wipes presaturated with 70% USP grade IPA and 30% DI water.

Supplier: Contec

Premoistened knitted polyester wipers and nonwoven polypropylene wipers are saturated with various solvent blends.

Supplier: Contec

The SATWipes® C1 with 100% acetone consists of a roll of 6×9" saturated wipes which are dispensed through a convenient center-pull canister that eliminates the need for solvent bottles.

Supplier: Contec

PROSAT® Sterile Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than 1 EU/wipe.

Supplier: Contec

Presaturated with IPA/DI water or 100% IPA.

Supplier: Contec

PROSAT® Sterile Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning. They are laundered and packaged in an ISO Class 4 cleanroom.

Supplier: Berkshire

Choice® SatPax 500 wipes are composed of a hydroentangled nonwoven blend of 60% cellulose and 40% polyester. This pre-wetted format provides a cost-effective and easy-to-use solution versus traditional bulk handling of solvents.

Supplier: Contec

SATWipes® Delta™ wipes consist of a perforated roll of saturated wipes dispensed through a center-pull canister. The wipes are 100% nonwoven polyester fabric creating a soft, durable, and clean wipe.

Supplier: Berkshire

SatPax® 550 wipers are exceptionally clean. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk handling of solvents, maintenance of squirt bottles, and inconsistent wetting and cleaning associated with wetting a dry wiper.

Supplier: Contec

The SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester creating highly sorbent and durable wipe.

Supplier: Contec

Meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. PROSAT® presaturated wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

PROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT® PS-Si Delta™ Wipes are the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: Contec

PROSAT® Sterile Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. These wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA pouch wipes are sterile knitted, 100% polyester wipes impregnated with 70% v/v Isopropyl alcohol blended with Water For Injection (WFI).

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ Neutral Detergent Pouch Wipes are sterile non-woven, low particulate wipes impregnated with a neutral, non-ionic detergent in a convenient resealable pouch.

Supplier: Contec

Manufactured from meltblown polypropylene these PROSAT® presaturated wipes offer exceptional cleanliness. They are low in nonvolatile residues as well as particles and fibers. The use of presaturated wipes provides maximum process control.

Supplier: Contec

PROSAT® Sterile Delta™ Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean, and strong.

Supplier: Contec

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT® Theta™ wipes offer a soft and durable wipe providing consistant solvent application.

Supplier: Micronova

Presaturated wiper provides lubricant in controlled applications.

Supplier: Contec

SATWipes® SWNW0013 series wipes consist of a roll of (700) 7×9" saturated wipes which are dispensed through a center-pull container.

Supplier: Contec

Premoistened polyester wipes are designed for general-purpose cleaning in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments.

Supplier: Contec

PROSAT® sterile polypropylene low endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: Contec

Microfiber wipes presaturated with 70% IPA and 30% DI water.

Supplier: Contec

100% interlock knit, standard weight textured polyester presaturated with 70% USP grade IPA and 30% DI water.