You searched for: Electrodes

Supplier: Hach

sensION+ 9652 is a half-cell (reference not integrated) chloride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to chloride ions in solution.

Supplier: Hach

sensION+ 5056 is a combination platinum ORP electrode with a glass body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.

Supplier: Hach

A variety of pH electrodes for different applications. Ideal for use with sense ION+ pH meters or any other meter with BNC connection.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The hydrogen peroxide sensors developed by WPI are designed to compliment existing high sensitivity fluorescent approaches with direct quantitative measurement in biological samples in the low nM range.

Supplier: Hach

These combination electrodes feature a low maintenance 3-in-1 design for the most challenging applications. Equipped with an integrated Pt1000 temperature sensor they provide stable results with low maintenance requirements.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 m.

Supplier: Hach

CDC866T Conductivity Cell

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOP007 has a tip diameter of just 7 µm and a length of 2 mm. The response is linear over a wide dynamic concentration range of NO.

Supplier: Hach

The Radiometer CDC511T is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), integrated temperature sensor and TPX body

Supplier: Hach

IntelliCAL™ ISENH4181 is a digital combination ammonium ion selective electrode (ISE) with a non refillable double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 meters.

Supplier: Hach

The IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor

Supplier: YSI

These probes are used with 5000 and 5100 and are ideal laboratory instruments for BOD tests. The YSI 5010 provides continuous stirring
for accurate measurement and faster response time.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO-NOP is a popular, robust and high performance sensor encased within a 2 mm diameter disposable stainless steel protective sleeve. The tip of the sleeve is covered with a NO-selective membrane. Replacement membrane sleeves can be purchased separately and require an internal electrolyte.

Supplier: Hach

sensION+ 5055 is a combination platinum ORP electrode with a polycarbonate body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ portable pH (mV) meters.

Supplier: Hach

The Radiometer CDC861T is a 4-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), integrated temperature sensor and glass body

Supplier: Hach

Digital combination ORP/Redox probes with built-in temperature sensor. Ideal for measuring absolute mV values in wastewater, drinking water and general applications.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Direct quantitative measurements of hydrogen peroxide in biological samples.

Supplier: Hach

The Radiometer CDC566T Conductivity Cell is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), robust epoxy body and integrated temperature sensor

Supplier: Hach

sensION+ 9655 is a half-cell (reference not integrated) fluoride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to fluoride ions in solution.

Supplier: Hach

The Radiometer Analytical CDC641T conductivity cell is a 2-pole conductivity cell with platinum sensor

Supplier: Hach

The Radiometer CDC741T is a 2-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), glass body and integrated temperature sensor

Supplier: Hach

sensION+ 5045 is a combination multi-parameter electrode for determination of pH, ORP and temperature. Dedicated for use with Hach sensION+ MM110 portable meters.

Supplier: Hach

This three-pole platinum cell with an integrated Pt1000 temperature sensor provides accurate, stable results over a wide measurement range.

Supplier: Hach

IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The probe is available in either a standard or a rugged version.

Supplier: Hach

Multisensor for pH, ORP, conductivity and temperature. For use with sensION+ MM150 multi-parameter meter.

Supplier: Hach

This three-pole platinum cell with integrated temperature sensor is protected against harsh field conditions.

Supplier: WTW

High quality, enhanced sensor technology combined with most modern measurement electronics.

Supplier: Antyila Scientific

These Conductivity Cells can be used with Jenway Portable Conductivity Meter (model 470) and/or Jenway Bench Conductivity Meter (model 4510 and 4520).

Supplier: Hach

Range of conductivity cells for a wide variety of applications.