You searched for: Electrodes

Supplier: Ace Glass

Type J temperature probes provide economical measurement from -20° C to 550° C

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high impedance 10x passive voltage probe with 10 MΩ input impedance. Probe features a readout actuator pin (sense pin) on the BNC connector.

Supplier: YSI

These sensor measures ORP (oxidation reduction potential) or redox, quickly and easily.

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high voltage 100x passive voltage probe with a 100 MΩ input impedance.

Supplier: Sper Scientific

Replacement probe for model 850059 pH Meter Datalogging Kit.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Carbon monoxide (CO) is a versatile mediator of physiological processes. Carbon monoxide (CO) formed by internal mechanisms (endogenous) is measured in a variety of ways, but standard measurement methods are of limited utility in most biological systems. CO sensor measures CO in vivo or in vitro in real time.

Supplier: WORLD PRECISION INSTRUMENTS LLC

ISO NOPF electrodes are  flexible sensor, nearly unbreakable and available in 100, 200 and 500 µm diameters. Laboratory have created these completely flexible and virtually unbreakable NO sensors.

Supplier: WTW

These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Low detection limit sensors to record in vitro. Hydrogen sulfide is generally thought of in terms of a poisonous gas, it is endogenously produced in many mammalian tissues. It has been detected in micromolar amounts in blood and brain tissue.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOP007 has a tip diameter of just 7 µm and a length of 2 mm. The response is linear over a wide dynamic concentration range of NO.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 meters.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOPNM is based on a novel design in which an electrochemically activated composite graphite nanofiber is used as the NO sensing element. The surface of the Nanosensor is then modified using a unique multi-layered NO selective membrane.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The hydrogen peroxide sensors developed by WPI are designed to compliment existing high sensitivity fluorescent approaches with direct quantitative measurement in biological samples in the low nM range.

Supplier: YSI

Connect any ProDIGITAL integrated probe/cable assembly the ProSolo to form a complete sampling system. Probe assemblies are user-replaceable with cable lengths ranging from 1 to 100 m.

Supplier: YSI

These probes are used with 5000 and 5100 and are ideal laboratory instruments for BOD tests. The YSI 5010 provides continuous stirring
for accurate measurement and faster response time.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO-NOP is a popular, robust and high performance sensor encased within a 2 mm diameter disposable stainless steel protective sleeve. The tip of the sleeve is covered with a NO-selective membrane. Replacement membrane sleeves can be purchased separately and require an internal electrolyte.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Direct quantitative measurements of hydrogen peroxide in biological samples.

Supplier: WTW

High quality, enhanced sensor technology combined with most modern measurement electronics.

Supplier: Hach

The IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor

Supplier: Hach

CDC866T Conductivity Cell

Supplier: Hach

The Radiometer CDC511T is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), integrated temperature sensor and TPX body

Supplier: Hach

The Radiometer CDC861T is a 4-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), integrated temperature sensor and glass body

Supplier: Hach

The Radiometer CDC566T Conductivity Cell is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), robust epoxy body and integrated temperature sensor

Supplier: Hach

The Radiometer Analytical CDC641T conductivity cell is a 2-pole conductivity cell with platinum sensor

Supplier: Hach

The Radiometer CDC741T is a 2-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), glass body and integrated temperature sensor

Supplier: Antyila Scientific

These Conductivity Cells can be used with Jenway Portable Conductivity Meter (model 470) and/or Jenway Bench Conductivity Meter (model 4510 and 4520).