You searched for: Petroleum Industry Standards

Supplier: Restek

Contains: Jet fuel A (64742-47-8)

Supplier: SPEX CERTIPREP LLC

Base Oil Standards

Supplier: Restek

Contains: Kerosene composite (84742-81-0)

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

Standards are packaged in purge-and-trap-grade methanol in 1 mL ampoules.

Supplier: Restek

2 components (SAE30 motor oil:SAE40 motor oil (1:1)).

Supplier: Restek

Diesel fuel #2 composite and Motor oil.

Supplier: Environmental Express

Premeasured controls for oil and grease analysis.

Supplier: Thermo Scientific Chemicals

Molecular Formula: Matrix: Isooctane
Physical Form: Liquid
Odor: Nearly odorless
UN No.: 1262
MDL No.: MFCD01094200

Supplier: Restek

Backflush Standard, ASTM D3606, (2,2,4-Trimethylpentane (isooctane)), Concentration: 5% vol/vol in nonane, Shelf life: 6 months, Storage: 10 deg C or colder, Volume: 1 mL/ampule

Supplier: Restek

Method 1664 Oil & Grease Standard, 2000 µg/ml each in acetone, Ampoule

Supplier: Restek

This consists of 10W30 motor oil:diesel fuel #2 (1:1 blend).

Supplier: Restek

ASTM Method D4059-00 is used for determining PCB concentrations in various types of transformer oil using GC-ECD detection

Supplier: Restek

Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product

Supplier: Restek

Standards are packaged in purge-and-trap-grade methanol at a concentration of 1000 µg/mL in a 1 mL ampoule.

Supplier: Restek

The mix consists of (C6) n-hexane, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C28) n-octacosane, (C35) n-pentatriacontane, (C36) n-hexatriacontane.

Supplier: Restek

Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.

Supplier: Restek

It consists of benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene, isopropylbenzene (cumene), 2-methylnaphthalene, methyl tert-butyl-ether (MTBE), naphthalene, toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

Contains two components, those are n-hexadecane and stearic acid.

Supplier: Restek

The mix consists of diesel fuel #2 composite, mineral oil.

Supplier: Restek

The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).

Supplier: Restek

Standards are packaged in methylene chloride at a concentration of 2000 µg/mL in a 1 mL ampoule.

Supplier: Restek

This TNRCC 1006 retention Ttme marker mix contains: (C6) n-Hexane, (C7) n-Heptane, (C8) n-Octane, (C10) n-Decane, (C12) n-Dodecane, (C16) n-Hexadecane, (C21) n-Heneicosane, (C28) n-Octacosane, (C35) n-Pentatriacontane.

Supplier: Restek

The glycol standard consists of two components they are ethylene glycol and propylene glycol.

Supplier: Restek

For monitoring samples suspected of gasoline contamination requires laboratories to calibrate and report these compounds.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: Restek

Standards are packaged in purge-and-trap-grade methanol at the stated concentrations in a 1 mL ampoule.

Supplier: Restek

Standard is packaged in purge-and-trap-grade methanol at a concentration of 2500 µg/mL in a 1 mL ampoule.