Supplier: Corning

Made from Type I Class A - low-expansion borosilicate glass, per ASTM E438 (standard specification for glasses in laboratory apparatus).

Supplier: SP Industries

When using thin layer or paper chromatography (TLC), these borosilicate glass atomizers are used for spraying chromogenic reagents.

Supplier: Chemglass

These TLC sprayers provide a fine, uniform spray ideally adjusted for the development of chromatographic patterns

Supplier: Electron Microscopy Sciences

Sure Shot® pressure sprayers are available in 16, 8 and 7 oz. capacities.

Supplier: General Glass Blowing

These indicator sprayers use low pressure air (5 lbs.) to provide a fine, uniform spray that is ideally adjusted for development of chromatography patterns

Supplier: MilliporeSigma

UV Lamp, 254 nm for Thin-Layer Chromatography

Supplier: Ace Glass

This sprayer delivers a true aerosol with no droplets, and enables thorough brushing for uniform development

Supplier: PerkinElmer

This High Sensitivity Nebulizer Assembly, with Platinum/Iridium needle and Kalrez O-rings, is for use with AAnalyst® 100/300/200/400/700/800 and earlier AA series instruments. It provides maximum sensitivity, precision and freedom from analytical interferences.

Supplier: PerkinElmer

This GemCone nebulizer is designed for use with the Optima® 3000 XL or the Optima® 3000 DV in the axial configuration. Low-flow GemCone Nebulizers permit lower nebulizer gas flow rates, useful for spectral lines with high excitation energies and for providing a more robust plasma.

Supplier: PerkinElmer

This high sensitivity plastic body nebulizer is for use with AAnalyst® 100/200/300/400/700/800 and earlier AA series instruments. It is corrosion resistant and can be used to aspirate almost all solutions, even those solutions containing a high percentage of acid.

Supplier: Ace Glass

This convenient, powerful spray unit is used for spraying indicators.

Supplier: PerkinElmer

The GemCone™ conespray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer.

Supplier: PerkinElmer

This GemTip™ Nebulizer is for use with Optima® 2x00/4x00/5x00/7x00 ICP-OES series instruments. It is an excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids.

Supplier: PerkinElmer

MEINHARD® Nebulizer made of glass for use with high dissolved solids solutions.

Supplier: PerkinElmer

This end cap assembly, which connects concentric GemCone™ and similar nebulizers to Ryton Scott spray chambers, is used with Avio® 200/500 ICP-OES, and Optima® 2x00 DV/4x00 DV/5x00 DV/7x00 DV/8x00 ICP-OES series instruments.

Supplier: PerkinElmer

This quartz baffled cyclonic spray chamber, with ball joint, is used for ELAN® DRC, DRCplus, and DRC II ICP-MS series instruments. It contains PTFE O-rings.

Supplier: Ace Glass

This sprayer is designed for cleaning ACE reactors without dismantling, or Clean-In-Place (CIP).

Supplier: PerkinElmer

This tip kit is designed for use with GemTip Cross-Flow II Nebulizers in Optima® 2x00/4x00/5x00/7x00 DV ICP-OES series instruments. It includes a clear sapphire sample tip and a red ruby argon tip constructed of PEEK with the gem inserts noted for maximum corrosion resistance.

Supplier: Electron Microscopy Sciences

An all glass unit for the simple production of microdroplets

Supplier: PerkinElmer

The Mira Mist® nebulizer handles most liquids, most flow ranges used in ICP and is one of the most rugged and longest life nebulizers due to its outer body being strong PEEK material. It fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features include standard pressure (45 psi), low sample flow and enhanced parallel path design.

Supplier: DWK Life Sciences (KIMBLE)

These reagent sprayers have an all-glass construction which makes them completely steam autoclavable.

Supplier: DWK Life Sciences (KIMBLE)

These sprayers are manufactured from 33 expansion, low extractable borosilicate glass, conforming to USP Type I and ASTM E438, Type I, Class A requirements.