You searched for: Environmental Test Kits

Supplier: Macherey-Nagel

Quantofix Nitrate/Nitrite test strips are for the rapid and reliable determination of Nitrate and Nitrite in solutions

Supplier: CHEMetrics

This product is a refill for K-6701 molybdate CHEMets visual kit and K-6702 molybdate CHEMets visual kit for the analysis of molybdate in water.It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-6702 molybdate CHEMets refill is compatible with C-6701 molybdate Comparator and C-6702 molybdate Comparator.

Supplier: NPS

Distinguish risks in unknown wastewater batches and classify for proper treatment in a mater of seconds

Supplier: LaMotte

This kit tests for turbidity using a turbidmetric card used match clarity to your sample.

Supplier: CHEMetrics

Test method: The Peracetic Acid CHEMets® test kit (0 to 1 and 0 to 5 ppm) employs the DPD chemistry. The sample is treated with an excess of potassium iodide. Peracetic acid oxidizes the iodide to iodine. The iodine then oxidizes DPD (N,N-diethyl-p-phenylenediamine) to form a pink colored species in direct proportion to the peracetic acid concentration. Various oxidizing agents such as halogens, ferric ions and cupric ions will produce high test results. Hydrogen peroxide does not interfere with this test if present at levels comparable to the peracetic acid levels.

Supplier: CHEMetrics

Film-forming amines, also known as FFAP or FFP, are chemicals applied in high-pressure boilers, cooling systems, and HRSGs to guard against corrosion and reduce the presence of corrosive agents. This test kit utilizes the Rose Bengal method to detect and measure these substances in boiler water or steam condensate.

Supplier: CHEMetrics

This product is a refill for K-9010 Silica CHEMets visual kit for the analysis of silica in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-9010 Silica CHEMets refill is compatible with C-9001 Low Range Silica Comparator and C-9010 high range Silica Comparator.

Supplier: Chemetrics

COD vials are used to measure the chemical oxygen demand of influent and effluent of wastewater treatrement facilities. Requires a digestor block and photometer/spectrophotometer.

Supplier: Macherey-Nagel

Semi-quantitative test strips for the determination of Sulfite. Ideal for rapid and easy analysis of Sulfite directly on-site. Can be used with test strip reader QUANTOFIX Relax.

Supplier: LaMotte

Chlorine test kit measures free, total and combined chlorine using chlorine DPD tablets and the Octa-slide 2 comparator.

Supplier: HF Scientific

For determination of free chlorine by the DPD method

Supplier: Environmental Express

Save time and improve safety in your laboratory.

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: CHEMetrics

Ideal for low- to medium-range colorimetric analysis of water quality

Supplier: Hanna

Use our simple handheld colorimeter to get higher accuracy water testing results. Forget about the struggle of matching your sample to a color chart, our total chlorine colorimeter eliminates the struggle and provides you a digital total chlorine result directly. Our ammonia colorimeter brings you more precise technology than your typical chemical test kit giving you accurate and consistent results.

Supplier: Micro Essential

The Hydrion Lo iodine kit provides an easy way to estimate the amount of titratable iodine in sanitizing solutions made with commercial iodophors. The color chart is easy to read and has color matches at 0, 12.5, 25, 50 ppm (parts per million) of titratable iodine.

Supplier: CHEMetrics

The CHEMets® visual colorimetric test kit turns a red-violet color in direct proportion to the hexavalent chromium concentration. Measurements are made against a color comparator. Results are expressed as ppm (mg/L) CrO4.

Supplier: CHEMetrics

R-1006 Film Forming Amines (FFA) CHEMets® refill contains 30 self-filling CHEMets ampoules to refill kit K-1006 for the analysis of filming amines in boiler water and condensate. R-1006 is compatible with C-1002 and C-1006 comparators.

Supplier: CHEMetrics

The R-1402 Ammonia/Monochloramine CHEMets® refill (HBA) is a refill for K-1420 Ammonia CHEMets® test kit (HBA) or K-6802 Monochloramine CHEMets® test kit.It contains 30 self-filling CHEMets® ampoules packaged securely in cardboard trays and box. This product is meant to refill your CHEMets® if you already have the necessary comparator(s) and accessory solution(s).

Supplier: Micro Essential

The Hydrion wide range Lo ion pH test kit is intended to test weakly buffered solutions and will give accurate pH readings at each full pH unit from pH 1.0-11.0. Estimates can be made to 0.5 ph units.

Supplier: Hach

5-in-1 test strips are multi-parameter test strips test offering five water quality measurements on 1 strip.

Supplier: CHEMetrics

This product is a refill for K-7006 Nitrite CHEMets visual kit for the analysis of nitrite in water. It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-7006 Nitrite CHEMets refill is compatible with C-7006 Nitrite low range comparator and C-7007 Nitrite high range comparator.

Supplier: Hanna

These reagents are the replacement reagents for the total chlorine checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.

Supplier: Chemetrics

Increments: 100, 110, 120, 130, 140, 150, 160, 180, 200, 250, 300, 350, 400, 500, 700, 1000 ppm

Supplier: CHEMetrics

This product is a refill for K-2511 chlorine (free and total) ULR CHEMets visual kit for the analysis of chlorine in water. It contains 30 self-filling ULR CHEMets ampoules packaged securely in cardboard trays and box. R-2511 chlorine (free and total) - ULR CHEMets refill is compatible with C-2511 chlorine comparator.

Supplier: Hach

Test kit

Supplier: Hach

Powder Pillows, Nitrate, NitraVer 5 & NitraVer 6

Supplier: Hach

Qualitative results using traditional color comparator disc methods.

Supplier: Hach

This solution is used for Aluminum determination by the Eriochrome Cyanine R Method.