You searched for: Environmental Test Kits
Determine the concentrations of a wide range of gases and chemicals in the environment, whether by air, water, or soil sampling. Portable, convenient handheld units are ideally suited for field analysis of samples. All instruments are easy to use with accurate readings for reliable service. Continual testing of the environment ensures that ongoing safety measures are being enforced properly and that the integrity of the ecosystem is intact.
Hydrogen Peroxide, Titrets Titration Cells, CHEMetrics
Supplier: CHEMetrics
The Titrets® test uses a ceric sulfate titrant with ferroin indicator. Depending on the procedure used, this kit can determine H2O2 concentrations from 0.01% to as high as 20%.
Expand 1 Items
Hardness (Total), Titrets Titration Cells, CHEMetrics
Supplier: CHEMetrics
The test kits utilize CHEMetrics Titrets® ampoules. Titrets ampoules use a reverse titration technique to measure analyte concentration levels (titrant volume inside the ampoule is fixed while the sample volume is varied).
Expand 2 Items
Innovating Science® Estuary Monitoring
Supplier: Ward's Science
Easy way to test estuary water for multiple factors.
Expand 1 Items
Hydrion® Sanitizer Test Kits, Micro Essential
Supplier: Micro Essential
Use Hydrion Sanitizer test papers wherever food is commercially produced or served to test the concentration of sanitizers, as required by health code
Expand 4 Items
LaMotte® Total Hardness, Calcium, and Magnesium Water Test Kit
Supplier: LaMotte
Precalibrated test tubes and labware give fast, accurate results on-site, in the classroom, or in the lab.
Expand 1 Items
Dissolved Oxygen Chemical Test Kit
Supplier: Hanna
This is a chemical test kit that measures dissolved oxygen by modified Winkler titration. The HI3810 is supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, Zirconium
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of zirconium in water.
Expand 1 Items
Total Hardness Chemical Test Kit
Supplier: Hanna
This chemical test kit measures total hardness as CaCO₃ by titration with EDTA. It includes all of the reagents and equipment necessary to perform approximately 100 tests.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, Sulphide
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of sulphide in water.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, Nickel
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of nickel in water.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, AOX
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of AOX in water.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, Sulphate
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of sulphate in water.
Expand 3 Items
NANOCOLOR® Photometric Tube Tests, Chlorine/Ozone
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of chlorine in water.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, Oxygen
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of oxygen in water.
Expand 1 Items
Manganese, CHEMets Visual Kit, CHEMetrics
Supplier: CHEMetrics
CHEMetrics’ Manganese water test kits employ the periodate chemistry that measures soluble manganese compounds but does not differentiate the various valence states.
Expand 2 Items
Model HA-4P Hardness (Total and Calcium) Test Kit, Hach
Supplier: Hach
Hardness, Total & Calcium (as CaCO3) drop-count titration/EDTA 100-test kit with range of 1-20 gpg
Expand 1 Items
Quantofix EDTA Test Strips, CTL Scientific Supply
Supplier: Macherey-Nagel
Quantofix EDTA test strips is for the rapid and reliable determination of EDTA, NTA and other complexing agents in solutions
Expand 1 Items
Reagent Set for Lovibond® Photometers, Lovibond®
Supplier: Lovibond
For "Mini Analyst" Chlorine, High Specific Test Portable Water Analyzer. Range: 0-250mg/L. 50 tests per kit. Uses single dose reagent tablets.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, Polyoxycarboxylic Acids
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR® tube test for photometric determination of polyoxycarboxylic acids in water.
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, Anionic Surfactants
Supplier: Macherey-Nagel
A pre-dosed NANOCOLOR tube test for photometric determination of anionic surfactants in water.
Expand 1 Items
Dual Range QAC Test Strips, LaMotte®
Supplier: LaMotte
The New Dual Range QAC Test Strip takes care of ALL of your testing needs on ONE STRIP!
Expand 1 Items
NANOCOLOR® Photometric Tube Tests, DEHA
Supplier: Macherey-Nagel
A range of pre-dosed NANOCOLOR® tube tests for photometric determination of DEHA (Bis(2-ethylhexyl)-hexanedioate) in water.
Expand 1 Items
Quantofix Nitrate/Nitrite Test Strips, CTL Scientific Supply
Supplier: Macherey-Nagel
Quantofix Nitrate/Nitrite test strips are for the rapid and reliable determination of Nitrate and Nitrite in solutions
Expand 2 Items
LaMotte® Turbidity Test Kit
Supplier: LaMotte
This kit tests for turbidity using a turbidmetric card used match clarity to your sample.
Expand 1 Items
Quantofix Sulfite Test Strips, CTL Scientific Supply
Supplier: Macherey-Nagel
Semi-quantitative test strips for the determination of Sulfite. Ideal for rapid and easy analysis of Sulfite directly on-site. Can be used with test strip reader QUANTOFIX Relax.
Expand 1 Items
Spilfyter® Waste Water Classifier, J.V. Mfg.
Supplier: NPS
Distinguish risks in unknown wastewater batches and classify for proper treatment in a mater of seconds
Expand 4 Items
Filming Amines CHEMets® Visual Test Kit Rose Bengal, CHEMets®, CHEMetrics
Supplier: CHEMetrics
Film-forming amines, also known as FFAP or FFP, are chemicals applied in high-pressure boilers, cooling systems, and HRSGs to guard against corrosion and reduce the presence of corrosive agents. This test kit utilizes the Rose Bengal method to detect and measure these substances in boiler water or steam condensate.
Expand 1 Items
Chemical Oxygen Demand (COD) Vials
Supplier: Chemetrics
COD vials are used to measure the chemical oxygen demand of influent and effluent of wastewater treatrement facilities. Requires a digestor block and photometer/spectrophotometer.
Expand 4 Items
Iron (total & soluble), Vacu-vials Instrumental Kit, CHEMetrics
Supplier: CHEMetrics
Ideal for low- to medium-range colorimetric analysis of water quality
Expand 1 Items
CHEMets® molybdate Refill 0 to 7 ppm
Supplier: CHEMetrics
This product is a refill for K-6701 molybdate CHEMets visual kit and K-6702 molybdate CHEMets visual kit for the analysis of molybdate in water.It contains 30 self-filling CHEMets ampoules packaged securely in cardboard trays and box. R-6702 molybdate CHEMets refill is compatible with C-6701 molybdate Comparator and C-6702 molybdate Comparator.
Expand 1 Items
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: VWR International
Supplier: Ansell Canada
Supplier: Akro-Mils
Supplier: VWR International
Supplier: SCN INDUSTRIAL CA
Supplier: VWR International
Supplier: Kimberly-Clark
Supplier: Medicom