You searched for: Fittings and Connectors

Supplier: Chemglass

Adapters, air inlets/outlets, overlay aeration, for bioreactors.

Supplier: Restek

Ferrules are designed for use with micropacked columns in Agilent 5890/6850/6890/7890 GCs

Supplier: BIOPTECHS INC.

These 9 mm thick internally and externally threaded polymer rings are to be placed between an objective and nosepiece to inhibit thermal conductivity.

Supplier: Restek

These adapters make a minimum-volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Trajan Scientific and Medical

SGE understands today’s chromatographers need to move from tubing based flow systems to planar microchannel systems to deliver flexible chromatography solutions

Supplier: BIOPTECHS INC.

The white, top portion of a FCS2® that is equipped with 0.5 mm I.D

Supplier: Restek

Restek is pleased to offer the reusable EXP® fitting system from Optimize Technologies for the ultimate in easy, reliable LC connections.

Supplier: Restek

PTV inlet adapter kits are suitable for 0.25 mm and 0.32 mm ID columns.

Supplier: Restek

Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.

Supplier: Restek

Use micropacked inlet conversion kits to convert capillary GC split/splitless inlets for use with ¹/₁₆" OD micropacked columns.

Supplier: Chemglass

Universal vent port assembly is constructed of 316 L electro polished stainless steel. These port assemblies fit all types of spinner flasks, media bottles and vessels. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.

Supplier: Optimize

Optimize is proud to introduce EXP2 - the next generation of EXP UHPLC fitting technology. Featuring a small ³/₁₆" hex-head EXP2 nut, the new EXP2 Driver and the original titanium hybrid ferrule, the EXP2 fittings offer hand-tight connections rated to 20000 psi+. The EXP2 nuts are available with 6-32, 6-40 and 10-32 threads and have been scaled down to allow for maximum working room in cramped spaces. The EXP2 Driver is a small, easy to use knurled torque driver which snaps on to the nuts for hand-tightening and loosening. The EXP2 Driver is slotted and can be removed from the nut and tubing after use.

Supplier: Peeke Scientific

Reusable vaplock filter connector 90° for polypropylene/EPDM justrite quick disconnect.

Supplier: ANALYTICAL SALES & SERVICE MS

Fits GL45 thread safety caps, GL38 bottle and Canary-Safe™ caps.

Supplier: IDEAL VACUUM PRODUCTS MS

These adapter rubber hose nozzles are KF-25 to rubber hose and fit a 12 mm ID rubber hose.

Supplier: Peeke Scientific

Tubing int.Ø: ⁵⁄₁₆"

Supplier: CP Lab Safety

ECO Funnels can be equipped with HPLC fittings, allowing the operator to connect HPLC waste lines directly to the funnel. Installation is free of charge. To order HPLC attached to your ECO Funnel(s), please add the desired funnels and fittings to your cart. We can install up to 6 HPLC fittings per 4" funnel and 8 fittings per 8" funnel. Measure the Int.Ø of your tubing to determine the size of Luer Barb fitting that you need.

Supplier: FIREFLYSCI, INC.

A pair of M6 threaded connectors for use in Type 601, 602, and 606 tablet dissolution cells. The connector holds the PTFE tube firmly in place to seal it tightly against the quartz cell.

Supplier: SANISURE, INC. - SPARTA

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.

Supplier: SANISURE, INC. LO

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.