You searched for: Filters

Supplier: Cytiva

Whatman Polycap TC filtration capsules from Cytiva feature dual layer polyethersulfone (PES) membranes and provide efficient filtration for aqueous solutions.

Supplier: Cytiva

High-quality nylon membranes are suitable for filtering aqueous solutions and most organic solvents. The membranes are suitable for use with a wide range of biological preparations and can be used where other membranes are unsuitable or difficult to use.

Supplier: Advantec MFS

Advantec glass fiber filters are made of pure borosilicate glass microfibers.

Supplier: Environmental Express

Prevent sample-to-sample contamination.

Supplier: AGILENT TECHNOLOGIES, INC (CSD)

Column Frits

Supplier: Sartorius

Sartolab® RF 50 vacuum filtration units are single-use units for the filtration of sample volumes up to 50 ml. They are available with either a 0.22 or 0.45 µm polyethersulfone membrane.

Supplier: DWK Life Sciences (KIMBLE)

This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL45 thread.

Supplier: Sartorius

Deionization cartridge featuring top-down flow technology.

Supplier: Foxx Life Sciences

The Autofil® 2 features 0.1, 0.2, or 0.45 μm PES membranes. Perfect for filtering FBS and other viscous solutions. The membrane is low protein binding and surfactant-free.

Supplier: Trajan Scientific and Medical

Big Trap Gas Purifiers are deisgned for bulk purification applications, or where several instruments are plumbed from a single source.

Supplier: IBI Scientific

The columns and collection tubes can be used with extra reagents from previously purchased full kits.

Supplier: Sartorius

Sartoclear Dynamics® Lab V kits enable clarification and sterile filtration to be performed in a single step.

Supplier: Thermo Fisher Scientific

Trap smoke and oil mist caused by high pressure operation at the pump exhaust port.

Supplier: Trajan Scientific and Medical

Gas purifier kits are designed to provide fast stabilization times to reduce gas consumption and provide clean gas to GC and GCMS systems.

Supplier: Sartorius

Reliable protection for the pretreatment of feed water.

Supplier: Cytiva

Cytiva's Nuclepore filters are manufactured from high-quality polycarbonate film, with sharply defined pore sizes and high flow rates for reproducible AOX analysis.

Supplier: Thermo Scientific

Pierce™ Centrifuge Columns are convenient tools for handling 40 µl to 10 ml of an affinity support for purification.

Supplier: Labconco

Washable prefilter kit for Logic biosafety cabinets.

Supplier: Sartorius

Vivaspin® 6 centrifugal concentrators have been developed to offer increased volume flexibility and performance. Vivaspin® 6 can process 6 ml in either swing bucket or fixed angle rotors accepting standard 15 ml conical bottom test tubes.

Supplier: Sartorius

Vivaspin® concentrators are disposable ultrafiltration devices for the concentration of biological samples of 0.4 to 2 ml.

Supplier: Greiner Bio-One

The new CELLSTAR®CELLreactor™ can be used as small bioreactor for suspension and spheroid cell culture, facilitating miniaturization of large scale setups and maximizing the number of parallel experiments.

Supplier: Restek

A Super Clean® quick-change cartridge system efficiently removes hydrocarbons from nitrogen; the Super Clean® gas trapping system purifies nitrogen and is ideal for use in LC-MS systems.

Supplier: Sartorius

To affinity and beyond: Fast, flexible and future-proof antibody purification.

Supplier: DWK Life Sciences (KIMBLE)

Eliminates the pouring of HPLC solvents by using a solvent pickup adapter to draw solvent directly from a reagent bottle through a 47 mm filter.

Supplier: Sartorius

LentiSELECT kits offer LentiSELECT 40, LentiSELECT 500 and LentiSELECT 1000 for the purification and concentration of VSV-G pseudotyped lentivirus from 40 to 1000 ml cell culture, leading to purified infective particles. These lentivirus purification and concentration kits offer purified recombinant lentivirus particles for in-vitro transfection a fast, safe and easy to use solution. These kits replace time-consuming ultracentrifugation protocols, which typically take about one day for large sample volumes, thus reducing the purification time to only a few hours.

Supplier: Dynalon

Made from high density polyethylene, these Buchner Funnel discs offer excellent chemical resistance.

Supplier: Advantec MFS

Glass fiber filters are depth filters that feature high-loading capacity, fast flow rates, and offer chemical and heat resistance.

Supplier: Advantec MFS

Pure PTFE (Polytetrafluoroethylene) fibers are sintered to create a unique depth-type filter.

Supplier: Sartorius

The Sterisart® NF System is a completely disposable technology based on the membrane filtration method, for the sterility testing of pharmaceutical products. It makes aseptic sampling easy, during or after incubation which is required for dilution or rapid detection, or for the supplement of additives for inactivation of antibiotics.

Supplier: Sartorius

These are for 0.1 to 1000 ml, Hydrosart® membrane. Vivaflow 50R is a ready to use and reusable laboratory crossflow cassette for applications like cell culture supernatant concentration, virus concentration and water sample concentration. The thin channel, flip flow recirculation path of the modules provides high crossflow velocities with minimum pump speed requirements. A single module with 50 cm² active membrane area typically concentrates 250 ml by a factor of 20 in less than 30 min.