You searched for: Electrodes

Supplier: Hach

This digital, combination gas-sensing ammonia ion selective electrode (ISE) with replaceable membrane module, refillable outer body, double junction reference and built-in temperature sensor is intended for laboratory use.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Carbon Fiber Microelectrodes

Supplier: NEWARK/ELEMENT 14 TE

Kelvin Test Probe Set consists of RG-174 cable with a BNC connector on one end and a Kelvin probe on the other end. Spring contacts of the Kelvin probe are sharply pointed to penetrate corrosion and are close together, for usage in tight areas.

Supplier: Mettler Toledo

Sensors ensure a high degree of accuracy and reproducibility for polarographic dissolved oxygen determination.

Supplier: WTW

This selection of conductivity cells includes the TetraCon® series of cells, which feature the highest degree of precision and linearity by optimized cell geometry, an extremely large measuring range with just one cell, long-term cell constant stability with high-quality abrasion-resistant graphite electrodes, and a built-in temperature sensor

Supplier: Ace Glass

Type J temperature probes provide economical measurement from -20° C to 550° C

Supplier: TESTEQUITY LLC TE

Probes for 4-wire and 2-wire measurements.

Supplier: TESTEQUITY LLC TE

Pogo pin spring-loaded tips. Plugs fit most Fluke, Tektronix, Hewlett-Packard and Wavetek meters.

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high voltage 100x passive voltage probe with a 100 MΩ input impedance.

Supplier: Antyila Scientific

Supplier: WORLD PRECISION INSTRUMENTS LLC

Carbon fiber microelectrodes have been used in both the detection of oxidizable compounds (Gonon, et al., 1978; Cahill and Wightman, 1995) and extracellular single-unit recording (Armstrong-James and Millar, 1979). WPI's ultra-sensitive and low-noise carbon fiber (CF) electrodes can be applied, with our MicroC Potentiostat or similar instruments, in the electrochemical detection of catecholamines (epinephrine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or melatonin), Fe (II) and other oxidizable compounds.

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high impedance 10x passive voltage probe with 10 MΩ input impedance. Probe features a readout actuator pin (sense pin) on the BNC connector.

Supplier: Hach

IntelliCAL™ LDO101 is a digital, luminescent dissolved oxygen (LDO) electrode which is ideal for measuring dissolved oxygen in wastewater, drinking water and general water quality applications.

Supplier: WORLD PRECISION INSTRUMENTS LLC

A new and innovative technology for measuring oxygen in gaseous and aqueous phase with important advantages over using common clark type electrodes.

Supplier: Hach

These glass electrodes are compatible with Hach sensION+ benchtop pH meters (or any meter with a BNC connection). The PHG301 pH electrode should be used with Ag/AgCl or calomel reference electrodes.

Supplier: YSI

These sensor measures ORP (oxidation reduction potential) or redox, quickly and easily.

Supplier: CAL TEST ELECTRONICS SE

A high bandwidth, high voltage 100x passive voltage probe with a 100 MΩ input impedance.

Supplier: Sper Scientific

Replacement probe for model 850059 pH Meter Datalogging Kit.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Carbon monoxide (CO) is a versatile mediator of physiological processes. Carbon monoxide (CO) formed by internal mechanisms (endogenous) is measured in a variety of ways, but standard measurement methods are of limited utility in most biological systems. CO sensor measures CO in vivo or in vitro in real time.

Supplier: Hach

3-in-1 laboratory combination pH electrodes with built-in temperature sensor.

Supplier: Hach

sensION+ 5057 is a combination platinum ORP electrode with a glass body and refillable liquid-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.

Supplier: WORLD PRECISION INSTRUMENTS LLC

ISO NOPF electrodes are  flexible sensor, nearly unbreakable and available in 100, 200 and 500 µm diameters. Laboratory have created these completely flexible and virtually unbreakable NO sensors.

Supplier: Hach

The 5044 with lithium acetate electrolyte is recommended for use with all sensION+ half-cell ion selective electrodes (ISE) in drinking water, wastewater and general water quality applications.

Supplier: Hach

sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.

Supplier: WORLD PRECISION INSTRUMENTS LLC

The ISO NOPNM is based on a novel design in which an electrochemically activated composite graphite nanofiber is used as the NO sensing element. The surface of the Nanosensor is then modified using a unique multi-layered NO selective membrane.

Supplier: WTW

These galvanic sensors are ready-to-use and are equipped with protective hoods for rough conditions.

Supplier: Hach

IntelliCAL™ ISENA381 is a digital combination sodium ion selective electrode (ISE) with a refillable double junction reference and built-in temperature sensor. The probe is intended for laboratory use.

Supplier: WTW

Optical dissolved oxygen probes for field and laboratory applications.

Supplier: WORLD PRECISION INSTRUMENTS LLC

Low detection limit sensors to record in vitro. Hydrogen sulfide is generally thought of in terms of a poisonous gas, it is endogenously produced in many mammalian tissues. It has been detected in micromolar amounts in blood and brain tissue.

Supplier: Hach

IntelliCAL™ ISECL181 is a digital, combination chloride ion selective electrode (ISE) with a non refillable, double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.