25154 Resultaten voor: "Liners+gc+septa+gc+ferrules"

Supplier: Trajan Scientific and Medical

Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.

Supplier: Trajan Scientific and Medical

Spuiten voor automatische monsternemer. Voor AOC14, AOC17 en AOC20

Supplier: Agilent

Microprobes, stainless steel, to remove septum and ferrule pieces in fittings

Supplier: Restek

Topaz GC inlet liners feature revolutionary technology and inertness.

Supplier: Restek

This direct injection liner adapter uses standard 1,59 mm capillary nut and ferrules. Can be used with Agilent or Restek direct injection glass inserts or Restek direct injection uniliner liners for an Agilent 5890 packed column GC.

Supplier: Restek

This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.

Supplier: Agilent

QuickPick purged packed inlet PM kit, with 5 non-stick BTO septa, 1 O-ring, 1 ferrule and 1 disposable glass liner

Supplier: Restek

Microseal septum incorporates two separate sealing mechanisms. These sliding seals eliminate septum coring and the resulting accumulation of septum crumbs in the injection port liner. The septum uses a 23-gauge (0,63 mm, 0,025”) needle or probe with a blunt, truncated conical tip. Since the syringe plunger end details are determined by manual or autosampler compatibility. The advantages of the septum include elimination of septum coring, longer life, consistent and low needle insertion force.

Supplier: Trajan Scientific and Medical

These GC ferrules are made from 100% PTFE. They are soft, completely inert, and have very low friction.

Supplier: Merck

Inlet liners used in an GC require an O-ring placed near the top for proper operation. This O-ring ensures that the only path for carrier gas to get to the outside of the inlet liner is through the grooves in the inlet seal at the bottom of the injection port.

Supplier: Merck

Ready to use GC septa for inlet temperature of up to 100 to 350 °C.

Supplier: Merck

SPME-GC inlet liners are designed for optimum sample introduction for specific injection techniques that are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Trajan Scientific and Medical

Vespel GC ferrules are made from 100% high-temperature polyimide, a hard polymeric material that tends to seal permanently to capillary columns when in use. A firm torque is required to compress and seal.

Supplier: Trajan Scientific and Medical

Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.

Supplier: Trajan Scientific and Medical

SilFlow™ microchannel device (MCD) options for three-port GC splitters, four-port GC splitters and a Deans' switch MCD, perfect for multi-dimensional analyses. SilFlow™ can be incorporated into the system without impacting the chromatography.

Supplier: Trajan Scientific and Medical

Endura-Seals are the CRS alternative to typical silicone-rubber injection port septa for gas chromatography. They work in a 2 part sealing system that includes the septa and the sealing nut.

Supplier: Trajan Scientific and Medical

Deactivated liners for DANI GCs.

Supplier: VWR Collection

Bijna alle septa hebben één gelamineerde zijde met PTFE (hoge chemische bestendigheid) en vormen een inerte barrière tussen dragermateriaal en monster.

Supplier: Trajan Scientific and Medical

Septa, BTO premium high-temperature GC septa, Ø: 10 mm, Max. temp.: 400 °C

Supplier: Trajan Scientific and Medical

Marathon long-life center guide GC septa are ideal for standard manual injection GC and GC/MS.

Supplier: Merck

These septa are suitable for use with 50 to 300 °C inlet temperatures.

Supplier: Trajan Scientific and Medical

Advanced Green 3 low-bleed GC septa is a premium septa for autosamplers in all critical analyses.

Supplier: VWR Collection

Bijna alle septa hebben één gelamineerde zijde met PTFE (hoge chemische bestendigheid) en vormen een inerte barrière tussen dragermateriaal en monster.

Supplier: Trajan Scientific and Medical

Graphite/Vespel® ferrule mini union, union 0,3 mm ID, supplied with 0,3 mm ferrules

Supplier: Trajan Scientific and Medical

General purpose blue GC septa, maded of silicone combines significantly longer injection life, low bleed and low injection port adhesion.

Supplier: Merck

The Discovery® C8 columns provide the best suitable selectivity for many applications.

Supplier: Merck

Ascentis®Phenyl HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity.

Supplier: Merck

Ascentis® C8 HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity.

Supplier: Trajan Scientific and Medical

Reliabily against the carrier gas pressure in the inlet. Capable of being pierced and resealing time after time without pieces of the septa being deposited in the GC inlet system. Does not contaminate or bleed material into the chromatographic system.

Supplier: Merck

The Discovery® RP-Amide C16 HPLC Column with unique retention and selectivity.