"EQUIP LABO"

Supplier: EQUIP LABO

Composition:
1 under-basin fixed furniture unit with an identical finishing to the mobile furniture
1 sink worktop
1 splashback to fit
2 veneer shelf supports
1 wide shelf 160 mm, (10 mm front edge)
1 U-bend
or
2 metal legs
1 sink worktop
1 splashback to fit
2 veneer shelf supports
1 wide shelf 160 mm, (10 mm front edge)
1 PE U-bend
1 laminate front strip
1 rear strip
1 rear fluid back panel
1 stop bar

Supplier: EQUIP LABO

The taps are of 3 types:

Supplier: EQUIP LABO

Composition:
1 under-basin fixed furniture unit with an identical finishing to the mobile furniture
1 sink worktop
1 U-bend
1 laminate front strip
or
2 metal legs
1 sink worktop
1 PE U-bend
1 laminate front strip
1 rear strip
1 rear fluid back panel
1 stop bar

Supplier: EQUIP LABO

Cabinets in melamine with a super-agglomerate face. Grey finish with white handles. Metal base with adjusting cylinder.

Supplier: EQUIP LABO

Supplied assembled with fitting accessories, length 900 mm.

Supplier: EQUIP LABO

Composition:
Counter-top laminate worktop
Welded frame 40×40 mm
4 castors (Ø 80 mm), including two with brakes
Maximum load distributed: 240 kg

Supplier: EQUIP LABO

For benches, there must be provision for electrical power supplies protected at the top, conforming to the NFC 15 to 100 standard in force, namely one cable for 6×220 V single phase sockets. For the twin pole + earth, 10/16 A it is necessary to provide a 220 V single phase 3G 2,5 to 16 A, 30 mA cable.

Supplier: EQUIP LABO

Frame:
30×30-mm metal base frame, protected by a white baked epoxy resin, fitted with level adjustment gas lift columns
Rear strip and a fluid back panel, with water resistant melamine on both sides, with all borders veneered
Metallic tube stop bar protected by a white epoxy resin

Supplier: EQUIP LABO

Composition :
One work plan
One corner frame to connect to two standard benches

Supplier: EQUIP LABO

Anti-vibration balance tables have a heavy black granite surface on a concrete base, mounted on a metal frame of robust tubular sections of 40×40 mm, which are independent from the bench. They are integrated into laminate worktops with space for a bench.
In black granite mounted on a concrete base.

Supplier: EQUIP LABO

Fixed furniture with levelling gas lift column. Must be mounted under a bench.

Supplier: EQUIP LABO

Layered filling (right or left), bare: 300 × 600 mm, Kitlab®

Supplier: EQUIP LABO

STAND. KIT AANSLUITING O200MM 1 * 1 ST

Supplier: EQUIP LABO

CENTRAL TECHNICAL BOX (on beach Top Lab base) SEC Width 300 1 * 1 ST

Supplier: EQUIP LABO

LABOTAFEL DOS + TABL 900X750MM 1 * 1 ST

Supplier: EQUIP LABO

Diepte pootgestel 750 mm, totale hoogte 900 mm 1 * 1 ST