"Bohlender"

Supplier: Bohlender

Ready-to-install plastic housing made of ABS (IP66) protects against accidental contact with live contacts.

Supplier: Bohlender

Straight connector made of static dissipative PE-EX.

Supplier: Bohlender

Integration of b.safeFunnels e. g. in side walls of laboratory hoods for more space at the working tables. Direct connection of b.safe Waste Tubes to lead liquid solvent waste directly into connected canisters.

Supplier: Bohlender

One connection for collectiong liquid waste from up to 4 HPLC systems that can be integrated directly in laboratory hoods or working tables. b.safe Waste Tubes lead liquid solvent waste directly into connected canisters.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. Solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

Elbow tube approximately 90°, made of static dissipative PE-EX.

Supplier: Bohlender

Square shaped magnetic stirrer bars with magnetic core of Alnico 5 encapsulated with PTFE.

Supplier: Bohlender

Stirrer blades made of PTFE, with angular groove and 5,8 mm bore diameter.

Supplier: Bohlender

Straight UNF screw-in tube fitting made of PTFE. One side with fitting thread GL 14 for connecting hard-walled tubes and tubing by means of BOLA Laboratory Screw Joints. Other side with male screw-in thread UNF 1/4 28G for connection to units and fittings with female thread UNF 1/4 28G.

Supplier: Bohlender

Toploader version, hinged lid opening with circular silicone gasket and four latches, vacuum gauge, two needle valves with hose connectors integrated in the hinged lid.

Supplier: Bohlender

PTFE, white. For bottles or reaction vessels with ground joint. For transferring liquids without contamination. For connection to a liquid source or a pressure or vacuum system.

Supplier: Bohlender

PTFE.

Supplier: Bohlender

PTFE head with two threaded necks GL14 for connection of hard-walled tubing by means of separately available laboratory screw joints. Connecting nut is made of PTFE reinforced with glassfibres. GL hose connectors are recommend for soft, flexible tubing. Temperature resistant from −200 to +250 °C with suitable vaccum transparent. PFA, transparent.

Supplier: Bohlender

Screw caps, made of PPS, with handy knurl, with integrated PTFE/silicone gasket for compensation of unevenness on the sealing surface.

Supplier: Bohlender

For vertical installation of b.safe funnels 130/180 on canister with inclined connectors and S60 thread. The insert made of static dissipative PE-EX is freely turnable inside the S60 screw cap (PPS) and thus allows vertical alignment of the funnel on the canister.

Supplier: Bohlender

Inner shape fits the outer shape of b.safe fittings for capillary tubing.