Graphite GC Ferrules
Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.
- Made from high purity exfoliated graphite
- Seals with minimal torque and can be frequently reused if not over compressed
- Graphite ferrules do not shrink in use but are very soft and must be packed and handled with care
You should always trim a short piece of the column after replacing the ferrule to be sure that not graphite particles have plugged the column.
Upper temperature limit of 450 °C.
Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.
- Made from high purity exfoliated graphite
- Seals with minimal torque and can be frequently reused if not over compressed
- Graphite ferrules do not shrink in use but are very soft and must be packed and handled with care
You should always trim a short piece of the column after replacing the ferrule to be sure that not graphite particles have plugged the column.
Upper temperature limit of 450 °C.
Product Family Options
Specialty GC ferrules
- OmschrijvingMateriaalØ inw.
- Cup GC ferrule for Thermo Finnigan (M4 nut)Grafiet0,28 mm1 * 10 ST71,80 €
- Cup GC ferrule for Thermo Finnigan (M4 nut)Grafiet0,38 mm1 * 10 ST71,80 €
- Shimadzu GC ferrule, 17A, 2010, and 2014, two piece graphiteGrafiet0,4 mm1 * 10 ST91,40 €
- Cup GC ferrule for Thermo Finnigan (M4 nut)Grafiet0,48 mm1 * 10 ST71,80 €
- Shimadzu GC ferrule, 17A, 2010, and 2014, two piece graphiteGrafiet0,5 mm1 * 10 ST91,40 €
- Shimadzu GC ferrule, 17A, 2010, and 2014, two piece graphiteGrafiet0,8 mm1 * 10 ST91,40 €
- Cup GC ferrule for Thermo Finnigan (M4 nut)Grafiet0,80 mm1 * 10 ST71,80 €
- Liner GC ferrule for Varian 1078/1079Grafiet— mm1 * 10 ST48,10 €
- OmschrijvingMateriaalØ inw.
- Agilent style GC ferrule 1,58 mmGrafiet0,4 mm1 * 200 ST829,00 €
- GC ferrule 0,4 mm for ThermoFinnigan (M8 nut)Grafiet0,4 mm1 * 10 ST40,00 €
- GC ferrule 1,58 mm, two hole graphiteGrafiet0,5 mm1 * 10 ST58,10 €
- GC ferrule 0,5 mm for ThermoFinnigan (M8 nut)Grafiet0,5 mm1 * 10 ST40,00 €
- GC ferrule 0,8 mm for ThermoFinnigan (M8 nut)Grafiet0,8 mm1 * 10 ST40,00 €
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.
Catalog #: 20864.320
: VWR Chemicals
Catalog #: 83640.320
: VWR Chemicals
Catalog #: 1.00030.2500
: Merck
Catalog #: 31770.294
: VWR Chemicals
Catalog #: 83645.320
: VWR Chemicals
Catalog #: 1.09439.1000
: Merck