U hebt gezocht naar: Fittingen en connectoren

Supplier: Restek

These finger-tight capillary column nuts made from high-quality stainless steel are an alternative to conventional column nuts. These fittings work best with graphite type ferrules and help prevent over tightening, which can cause graphite material to exude into the inlet.

Supplier: Restek

EXP® reusable fittings for easy and reliable HPLC and UHPLC connections for 10 to 32 fittings and ¹/₁₆" tubing.

Supplier: VICI JOUR RESEARCH

Fiberglass reinforced PP with PP washers. A number of chromatography systems still require or prefer flanged connections. When the tubing is flanged, the washer never comes in contact with the mobile phase.

Supplier: DWK Life Sciences

Hose connector, 13-425

Supplier: Restek

Double connectors are used to effectively connect any click-on trap to a click-on indicator.

Supplier: GLASWARENFABRIK KARL HECHT

Assembly kit for filtering flasks, with removable plastic hose connection, short and long screw and seals.

Supplier: UPCHURCH SCIENTIFIC

PEEK of PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Met Upchurch Scientific® quick connect luer-adapters kunt u een vrouwelijke of een mannelijke luer-aansluiting geschikt maken voor een schroefdraadaansluiting. Voldoet aan de ISO-vereisten voor medische conusvormige configuraties en prestaties van luer-toepassingen (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: Restek

Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: Restek

Ferrules are available in Vespel®, graphite or Vespel®/graphite.

Supplier: Restek

Vespel/graphite ferrule, fitting size 0,8 mm, Boring Ø: 0,5 mm

Supplier: Restek

These ferrules are made of aluminium eliminate out-gassing and make leak-tight seals for less detector noise. Its unique two-piece design permanently locks on fused silica tubing without causing breakage.

Supplier: Restek

Fused silica adapter ferrules are made from valcon polyimide, a unique graphite reinforced composite that is specially made to maximise mechanical stability at temperatures up to 350 °C.

Supplier: Restek

These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.

Supplier: Restek

Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in Siltek®/Sulfinert® or Silcosteel®-CR treatment.

Supplier: Restek

Universal 10-32 PEEK connectors for easy installation of all ¹/₁₆" tubing, it includes stainless steel, up to 345 bar.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: witeg Labortechnik

Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: CADENCE SCIENCE

Female luer lock adapters, Roestvrij staal