Deïonisatiesystemen

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Supplier: MIELE

Aqua zuiveraar voor twee volledige of gedeeltelijke demineralisatiepatronen. De behuizing is gemaakt van wit staal of roestvrij staal.

Supplier: SMEG

De WP3000 waterzuiveraar kan worden gebruikt met GW3060 en GW4090 om gedeïoniseerd water te produceren bij 0,8 to 1 μS/cm en is geschikt voor de laatste spoeling van instrumentringen. Het systeem maakt gebruik van mengbedharsen (voor eenmalig gebruik) die ook silica kunnen vasthouden. Wanneer de harsen verzadigd zijn, kunnen ze eenvoudig worden vervangen door de MI700WP-kit.

Supplier: ELGA LabWater

These wall-mounted deionisers are cost-effective stand-alone systems that provide 30 to 90 l of primary or deionized grade water for a wide range of laboratory and general manufacturing applications.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Ready-to-connect systems for the production of soft water.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: GLASWARENFABRIK KARL HECHT

Ion exchanger for purified water.

Supplier: Thermo Fisher Scientific

It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

Supplier: BEHR

These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Supplier: Restek

This Parker HydroGen mate deionising water system is an economical means of providing deionized water to hydrogen generators or for other uses. It removes organics, phosphates, chlorine and essentially all ionizable constituents from water supply.

Supplier: BEHR

Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.