U hebt gezocht naar: Pompen

Supplier: LABCONCO

Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Supplier: EDWARDS HIGH VACUUM METTLER

Electrical supply cable 2 m, japan

Supplier: BUCHI

Diaphragm vacuum pump is made up PTFE and it is chemically resistant with a space saving design. It meets all the needs of vacuum generation. It is usable for multiple applications such as evaporation, drying, concentration, suction straining and filteration. It is a maximum longevity product due to robost and stable design and integrated ECO² mode.

Supplier: LABCONCO

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: EDWARDS HIGH VACUUM METTLER

TIC Instrument controller is a compact control with a large, clear graphical display, an intuitive user interface and serial communications.

Supplier: EDWARDS HIGH VACUUM METTLER

These XDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including water, solvents, dilute acids and bases. It also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Comes with integrated inverter drive with auto sensing voltage input delivers optimised pumping performance. The pumps are completely field serviceable.

Supplier: witeg Labortechnik

Water jet pumps made of brass and nickel-plated.

Supplier: EDWARDS HIGH VACUUM METTLER

These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

Supplier: EDWARDS HIGH VACUUM METTLER

This Active Digital Controller (ADC) is a compact single gauge controller with automatic recognizes compatible Edwards gauges, loads the appropriate look-up table and displays the pressure in commonly used vacuum units.

Supplier: BUCHI

These V-300 PTFE diaphragm vacuum pumps impresses with its very silent and economical operation. These pumps have been operated at a flow rate of 1,8 m³/h and an ultimate vacuum of 5 mbar.

Supplier: EDWARDS HIGH VACUUM METTLER

The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10^-9 mbar.

Supplier: EDWARDS HIGH VACUUM METTLER

Active Inverted Magnetron gauge is a combined unit of the gauge-head and controller. This gauge operates as a cold cathode ionisation gauge, in which pressure is measured indirectly as a function of the current that flows in a Townsend discharge maintained in the body tube.

Supplier: EDWARDS HIGH VACUUM METTLER

Model APG.
These gauges have a measuring range from atmosphere to 1×10⁻⁴ mbar and combine the gauge head and controller in one compact active unit.

Supplier: HARVARD APPARATUS

Peristaltic Pump P-70 offers unparalleled accuracy, reproducibility, and ease of use. P-70 drive provides flow rates from 0,001 to 70 ml/min.

Supplier: Spectrum Laboratories

Spectrum's KrosFlo Research I (KRI) system combines a digital peristaltic pump and a multi-purpose lab stand to provide ultimate convenience and efficiency for experiments involving fluid circulation and transfers. The easy-to-operate digital KRI pump drives the fluid stream through flexible tubing (to be order separately) while the incorporated stand and included holders secure the tubing, filters, reservoirs and other components in place.

Supplier: BUCHI

The three-piston pump module with a pulse-free flow rate from 2,5 to 250 ml/min guarantees fast separation at a maximum working pressure of 10 bar (145 psi) or 50 bar (725 psi) for isocratic or gradient mode. These pump modules are the core components of the Sepacore® chromatography systems. The chemically resistant and biocompatible pumps can be used with a wide range of organic solvents.

Supplier: BEHR

Models PLP 66, PLP 330 and PLP 1000. These peristaltic pumps include a pump rotor, two compression and four guide rollers.

Supplier: EDWARDS HIGH VACUUM METTLER

The E1M18 and E2M18 pumps are direct drive, sliding vane pumps. The E1M18 is a single-stage pump, and the E2M18 is a two-stage pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Supplier: Heidolph Instruments GmbH & Co.KG

Model PD 5101 en PD 5106 voor toepassingen waaraan hoge eisen worden gesteld. Peristaltische pompen zijn ideaal voor het transporteren en doseren van agressieve, abrasieve of corrosieve oplossingen, evenals voor steriele media onder lage druk. Het te transporteren medium komt alleen in aanraking met de slang zodat er geen verontreiniging plaatsvindt. Geschikt voor het transporteren van media met hoge viscositeit, tot maximaal 10,000 mPas. De pompen zijn zelfaanzuigend, zonder afdichtingen of kleppen. Ze kunnen worden gebruikt in de voedingsmiddelenindustrie voor filtreren en scheiden, bij de waterbehandeling, in de biotechnologie en voor routinematige laboratoriumtoepassingen. Pompen onder druk en vacuüm is mogelijk. Onderhoudsvrije motoren voor een lange levensduur.

Supplier: EDWARDS HIGH VACUUM METTLER

These high performance rotary pumps are used in many industrial and laboratory applications. They offer the option of high throughput or high ultimate vacuum by the adjustment of a single control. RV pumps can be run continuosly with inlet pressures up to 50 mbar or can be set to achieve an ultimate partial pressure of 1×10⁻⁴ mbar. For drying applications the water handling capability is 290 g per hour at vapour pressures up to 80 mbar (RV 12).

Supplier: EDWARDS HIGH VACUUM METTLER

Pump includes all of the components required for laboratory applications such as those found in wet chemistry and sample preparation. It allows for continuous running even in the presence of water and solvents and incorporates an integral fast acting inlet valve that holds the system under vacuum in case of a power failure. Ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, glove boxes and vacuum filtration equipment.

Supplier: EDWARDS HIGH VACUUM METTLER

Clean and overhaul kit

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: EDWARDS HIGH VACUUM METTLER

E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

Supplier: Heidolph Instruments GmbH & Co.KG

Model PD 5001 en PD 5006 voor standaardtoepassingen. Peristaltische pompen zijn ideaal voor het transporteren en doseren van agressieve, abrasieve of corrosieve oplossingen, evenals voor steriele media onder lage druk. Het te transporteren medium komt alleen in aanraking met de slangen zodat er geen contaminatie kan plaatsvinden. Geschikt voor het transporteren van media met hoge viscositeit tot maximaal 10000 mPas. De pompen zijn zelfaanzuigend, zonder afdichtingen of kleppen. Ze kunnen worden gebruikt in de voedingsmiddelenindustrie voor filtreren en scheiden, voor waterbehandeling, in de biotechnologie en voor routine laboratoriumtoepassingen. Verplaatsing onder druk en vacuüm is mogelijk. Onderhoudsvrije motoren voor een lange levensduur.

Supplier: EDWARDS HIGH VACUUM METTLER

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Supplier: Lenz Laborglas GmbH & CO.KG

Duran®, with hose connections. With spiral nozzle. For high performance.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Vacuum aspiration system. A plastic supporting plate with carrying handles and attachments for holding the vacuum-proof suction flask make the system compact and mobile at any time.

Supplier: Restek

Vacuum/pressure station allows switching from pressure to vacuum in a matter of seconds. It is quiet and has a oil-free unit which will not contaminate the extraction system or samples. Provides 20" Hg (68 kPa) vacuum or 18 psi (124 kPa) pressure.

Supplier: Heidolph Instruments GmbH & Co.KG

Model PD 5201 en PD 5206 voor geavanceerde toepassingen. Peristaltische pompen zijn ideaal voor het transporteren en doseren van agressieve, abrasieve of corrosieve oplossingen, evenals voor steriele media onder lage druk. Het te transporteren medium komt alleen in aanraking met de slangen zodat er geen verontreiniging plaatsvindt. Geschikt voor het transporteren van media met hoge viscositeit tot maximaal 10000 mPas. De pompen zijn zelfaanzuigend, zonder afdichtingen of kleppen. Ze kunnen worden gebruikt in de voedingsmiddelenindustrie voor filtreren en scheiden, voor waterbehandeling, in de biotechnologie en voor routinematige laboratoriumtoepassingen. Media kunnen onder druk en vacuüm worden getransporteerd. Onderhoudsvrije motoren voor een lange levensduur. De door de pompkoppen verplaatste hoeveelheden worden afhankelijk van de afzonderlijke gebruikte slangen in het programma opgeslagen en worden weergegeven op het digitale display. Software kan afzonderlijk als toebehoren worden besteld. De pompaandrijving wordt aangestuurd door een microprocessor. Uitgerust met digitale RS232-interface; toerental, doseringshoeveelheid, debiet, onderbreking en slangdiameter kunnen worden ingesteld. Digitale weergave van toerental (min⁻¹) en debiet (ml/min). Digitale weergave van verplaatst volume (ml) in geval van volumedosering. Onderbroken dosering is beschikbaar met instelbare onderbrekingstijden. Naast de weergave van het debiet kan ook een doseringsvolume worden opgegeven. Zeer eenvoudige kalibratie van verplaatst volume (ml) en debiet (ml/min).