U hebt gezocht naar: Ventielen

Supplier: Restek

Sulfinert® treated gas sample loops are ideal for samples containing low concentrations of sulphur and other active compounds.

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass, clear. Prevent pressure loss or backflow. Simple design, cannot be dismantled.

Supplier: UPCHURCH SCIENTIFIC

Inline cartridge check valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for these valves would be on the effluent side of the column to prevent post-column derivatisation agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down.

Supplier: UPCHURCH SCIENTIFIC

The Quick-Stop Luer check valve assembly is specifically designed to provide inline Luer connect/disconnect convenience while avoiding spills. It is made from biocompatible PEEK with gold-plated stainless steel spring.

Supplier: UPCHURCH SCIENTIFIC

Designed to accurately split and control the low flow stream of a single incoming supply.

Supplier: Restek

Outlet cartridges, sapphire and ruby ball and seat

Supplier: Restek

Valves for ASE® 100/200/300 systems.

Supplier: OPTIMIZE TECHNOLOGIES

A single OPTI-MAX® cartridge is interchangeable across multiple pump brands and can function in either the inlet or outlet position.

Supplier: Restek

Backpressure regulators can improve detector performance by preventing bubble formation in the detector flow cell. They also are useful in post-column reaction lines and between detectors and fraction collectors in preparatory work. Regulators are superior to more specific alternative solutions like small bore tubing, in which pressure varies with flow rate.

Supplier: Restek

These shut-off plug valves work well in any application which requiring throttling or on/off operations.

Supplier: OMNIFIT

The high pressure manual rotary valves are made from PTFE with a PCTFE rotor with a bore size of 0,8 mm making them ideal for pressure applications up to 500 psi. They are available in four and five port versions. All ports are 1/4"-28 UNF flat-bottom and will accept any 1/4"-28 UNF male fitting. These valves are mountable using the pre-drilled M3 mounting holes.

Supplier: SciLabware

Designed for use in vacuum lines and fluid handling systems.

Supplier: Restek

Mininert® valves are very convenient for repetitive sampling and limit content exposure to the silicon septum. The crimp-top valve for 20 mm ID glassware slides into the neck of the vial.

Supplier: UPCHURCH SCIENTIFIC

Back pressure regulator assemblies are designed to create incremental back pressures ranging from 5 to 1000 psi (0,3 to 69 bar). These biocompatible and stainless steel back pressure regulator assemblies are available complete with a replaceable, factory pre-set cartridge (except the 5 and 20 psi (0,3 to 1,4 bar versions).

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: UPCHURCH SCIENTIFIC

The 6-port medium pressure injection valves feature easy, external sample loop customisation. Simply clean-cut a piece of tubing that represents the volume of sample you wish to inject, taking into account the port-to-port volume of the valve.

Supplier: NEUBERT VOLUME GLASSWAERE

Loose closure with variable weight check valve.