U hebt gezocht naar: Ventielen

Supplier: BURKLE

Terugslagventielen met richtingpijl in reliëf of zwart gedrukt. Met conische spuitmondjes. Diverse toepassingen. PP, transparant.

Supplier: Socorex Isba

Replacement kits for the valve assembly are supplied in a dedicated bag with each Socorex® self-refilling syringe.

Supplier: BURKLE

Valve made of PP and POM, seal made of EPDM, springs made of stainless steel 1.4401.

Supplier: DWK Life Sciences

Kit includes 1 spring, 2 balls, 2 washers for valve, and barrel washer.

Supplier: Bel-Art Products, a Part of SP

PP valve, translucent with neoprene valve disk. Stops reverse flow of liquid when pressure is interrupted.

Supplier: Cytiva

Range of manual and automated valves to meet a variety of performance requirements. They are designed for biocompatibility and years of reliable service, each may be inserted into the flow path without causing unnecessary mixing or sample dilution.

Supplier: BD Medical

DEHP or natural rubber latex are not part of the material formulation.

Supplier: Agilent

Replacement valve WE series, 6-port, 400 psi, 225 °C

Supplier: VARIAN

Valves made from stainless steel are two-position with six-port. It is manually operated with three-way switching.

Supplier: Agilent

New style restrictor, 0 - 400 ml/min, black/purple colour

Supplier: Agilent

The stainless steel 7725i and PEEK 9725i manual injection valves are suitable for large sample volumes, high flow rates and preparative columns sized 10 to 100 mm in diameter.

Supplier: Agilent

Back pressure regulator, 1 - 15 psi

Supplier: Merck

The sampling valves are used for sterile sampling of water or other final products in the pharmaceutical industry.

Supplier: witeg Labortechnik

Spare needle valve, PTFE, red for high vacuum stopcocks WITAFLO, 3 mm hole

Supplier: witeg Labortechnik

Needle valve for burettes, lateral with PTFE plug, 0 - 2,5 mm bore

Supplier: UPCHURCH SCIENTIFIC

These standard inline check valves are made from gold plated stainless steel.

Supplier: Restek

These valves and tees are made from stainless steel or are Sulfinert®-treated.

Supplier: QVF LABORTECHNIK

Air valve anti-return, cone size 14/23 NS, with sidearm, Borosilicaatglas 3.3

Supplier: Restek

These metering gas valves reduce pressure between sample cylinder and GC injector.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, V-101L-60 right angle flow-switching valve, bulkhead version, 1/16" OD tubing, 1,0 mm thru-hole, 6,2 µl swept volume

Supplier: UPCHURCH SCIENTIFIC

Pressure relief valves are ideal for preventing system over-pressurisation. These products protect system components by diverting fluid flow automatically when inline pressure exceeds the set limit.

Supplier: UPCHURCH SCIENTIFIC

These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Supplier: UPCHURCH SCIENTIFIC

For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Supplier: UPCHURCH SCIENTIFIC

Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Supplier: VICI JOUR RESEARCH

Deze regelaar wordt geïnstalleerd op de afvoerleiding van de detector en voorkomt de vorming van lucht in de doorstroomcel tijdens het gassen. De regelaar beschikt over een instelbare tegendruk van 0-20,5 bar (300psi) zonder loskoppeling van het systeem. Andere maten zijn verkrijgbaar.

Supplier: OMNIFIT

Valves are constructed from PTFE with a PCTFE rotor and have a 1,5 mm bore size. They accept tubing sizes between 0,5 and 4 mm Ext.Ø. and are pressure rated to 50 psi.

Supplier: Restek

Sulfinert® treated gas sample loops are ideal for samples containing low concentrations of sulphur and other active compounds.

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass, clear. Prevent pressure loss or backflow. Simple design, cannot be dismantled.

Supplier: Restek

These gas valves are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections.

Supplier: VICI JOUR RESEARCH

These micro valves for LC and GC has a unique design of the fitting detail which allows a leak-free seal with no potential for rotor damage from overtightening.