U hebt gezocht naar: Afdichtingen

Supplier: VACUUBRAND

Roestvrij staal, met O-ringafdichting van FPM.

Supplier: LONZA

GelBond® film is a transparent, flexible polyester film designed to support agarose gels. Gels cast on GelBond® film remain permanently attached to the film through electrophoresis or immunodiffusion and all subsequent fixing, staining, destaining, and drying procedures. GelBond® Film is available either as precut sheets or rolls.

Supplier: VACUUBRAND

Indium sealing for KF connections with stainless steel/aluminum centering rings (inside/outside) for small flange.

Supplier: Brand

Gas permeable films (sterile/non sterile) are popular for growing cells and microorganisms. Temperature range: −20 to +80 °C.

Supplier: Thermo Fisher Scientific

Microplate sealing tape consisting of pre-cut, pressure-sensitive sheets for sealing the surface of standard 96-well or 384-well microplates during incubation steps.

Supplier: RATIOLAB

Afdichting microplaat, Mat (96 wells), Single sheet/mat/strip, Closure, 8×12 afdekmatten, TPE, TPE, Niet steriel

Supplier: OMEGA BIO-TEK

AeraSeal is a 114 µm thick, hydrophobic porous film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth.

Supplier: iST Scientific Ltd

Clear strong bonding film ideal for water thermal cyclers. Suitable for qPCR, PCR (water bath thermal cycling), storage, sample inspection, disposal of hazardous materials, use with DMSO.

Supplier: iST Scientific Ltd

Peelable foil laminate for polyproylene plates. Suitable for PCR, low temperature, short term compound storage, short term room temperature compound storage (less than 5 days).

Supplier: iST Scientific Ltd

Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. The ClearASeal Peel is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates

Supplier: Brand

Afdichting microplaat, Cap strip, Single sheet/mat/strip, Cap strips, 8-strip, flat top, Strips van 8 PCR-doppen, helder, voor qPCR, plat, voor skirted PCR-platen met laag profiel

Supplier: DWK Life Sciences

Silicone, translucent.

Supplier: iST Scientific Ltd

Non woven gas permeable and peelable seal for PP and PS plates. Suitable for short term incubation, agriculture and seed storage, insect storage, cell culture.

Supplier: iST Scientific Ltd

Pierceable foil seal with good solvent resistance. Suitable for PCR, compound storage, and sample shipping.

Supplier: Brand

Cover mats reduce the maximum volume of wells.

Supplier: Brand

Aluminium sealing film can be pierced easily with a pipette tip for sample removal. Temperature range: −80 to +120 °C.

Supplier: Simport Scientific

Adhesive sealing films reduce sample-to-sample or well-to-well contamination and/or spill over. SecureSeal™ has the differential advantage of perforated end tabs and a multiple split backing which allow for easier and more accurate positioning and more secure sealing. The polyester based film with acrylic adhesive is inert and thus compatible with almost all microplate procedures. SecureSeal™ is less than 0,001% moisture permeable under high humidity conditions and less than 0,01% oxygen permeable.

Supplier: Brand

Black sealing film made of vinyl is highly suitable for fluorescence measurements because of its light-absorbing characteristics. Temperature range: −40 to +80 °C.

Supplier: Brand

Chemical resistant PE/PP film offers adhesive-free areas over the wells to avoid contamination. Furthermore, it can be pierced easily with a pipette tip (for sample removal). Temperature range: −40 to +90 °C.

Supplier: Simport Scientific

Superflex™, Afdichting microplaat, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, helder, Niet steriel

Supplier: Brand

Polyester flims suitable for PCR and Real-Time PCR measurements. Temperature range: –40 °C to +120 °C.

Supplier: G-Biosciences

Acetate film with acrylic adhesive. This self-adhesive microplate sealing tape is suitable for sealing both 96-well and 384-well plates. The precut, pressure-senstive tape seals and reseals the surface of the plates during incubations to prevent evaporation and allow more vigorous mixing. The tape will reseal the plates 2 to 3 times.

Supplier: THERMO MATRIX TECHNOLOGIES

The gas permeable adhesive seal provides a simple and effective way of venting cultures whilst providing a barrier against contaminating bacteria. When used in conjunction with Thermo Scientific storage plates, bacterial growth can be increased by over 50%, compared to plates sealed with an aluminium foil seal or sealing mat.

Supplier: iST Scientific Ltd

Clear pierceable film ideal for PP, PE, PS and COC plates. Suitable for use with the ABI 3730 sequencer as the thinner structure pierces more easily.

Supplier: Simport Scientific

Designed to fit the Bioblock™ family, these mat covers are made of a specially formulated plastic ensuring great flexibility. They allow for maximum sample volume in each well. They are resistant to DMSO and biological buffers.

Supplier: Brand

White light-reflecting film made of vinyl should be used in luminescence measurements. Temperature range: −40 to +80 °C.

Supplier: Simport Scientific

Amplate™, Afdichting microplaat, Mat (96 wells), Single sheet/mat/strip, Afdichtmat voor 96-wells PCR-platen, Santoprene™, blauw

Supplier: Brand

Transparent PP film allows the visual inspection of the samples. Temperature range: −40 to +125 °C.

Supplier: Simport Scientific

Amplitube™ domed cap strips ensure a perfect closure and a positive seal during thermal cycling and prevent evaporation.

Supplier: iST Scientific Ltd

Peelable DMSO resistant foil for polypropylene plates. Suitable for low temperature and ambient temperature storage with DMSO and other solvents.