Supplier: Thermo Fisher Scientific

The DyLight™ Antibody Labeling Kits were specifically developed for fast, efficient labeling of antibodies. Two convenient kit formats are available to accommodate varied labeling requirements. The DyLight™ Antibody Labeling Kits contain all necessary components to perform three separate labeling reactions using 1 mg of IgG or similar quantities of other proteins.

Supplier: Thermo Fisher Scientific

Cross linkers are used for the identification of near-neighbour protein relationships and ligand-receptor interactions. Homobifunctional, amine-reactive NHS esters or imidates, and heterobifunctional, amine-reactive, photoactivatable phenyl azides are the most commonly used crosslinkers for these applications.

Supplier: Thermo Fisher Scientific

The DyLight™ Specialty Dyes are fluorescent dyes with varying spectral characteristics, degrees of sulfonation, charges and hydrophobicities. These dyes are offered in their amine-reactive forms and are mainly derivatized with N-hydroxysuccinimide (NHS) esters, the simplest and most commonly used reactive group for labeling proteins. The large selection of near infrared (NIR) and infrared (IR) dyes may be used for in vivo and near-IR fluorescence (NIRF) applications.

Supplier: Thermo Fisher Scientific

The DyLight™ NHS Ester Quenchers are amine-reactive non-fluorescent dyes that use fluorescent resonance energy transfer (FRET) to quench fluorescent signals resulting from ultraviolet, visible and infrared light-excited fluorescent dyes. These dyes can be efficiently paired with many DyLight™ dyes and other common fluorescent dyes including fluorescein, rhodamine, cyanine and Texas Red® dye.

Supplier: Thermo Fisher Scientific

EZ-Link™ Desthiobiotinylation and Pull-down Kit is a complete set of reagents to biotin-label purified proteins and use them to purify interaction complexes using streptavidin agarose resin with mild elution conditions.

Supplier: Thermo Fisher Scientific

The Pierce™ Crosslink Immunoprecipitation (IP) Kit enables highly effective and efficient antigen immunoprecipitations by covalently crosslinking antibodies onto Protein A/G resin.

Supplier: Thermo Fisher Scientific

Sulfo-SBED is a trifunctional crosslinking reagent containing a biotin, a sulfonated N-hydroxysuccinimide (Sulfo-NHS) active ester and a photoactivatable aryl azide

Supplier: Merck Millipore (Oncogene)

Biotin-NHS reacts with primary amines to biotinylate proteins under mild conditions. Since it is water-soluble, this compound can be used to biotinylate cell-surface proteins and proteins that are sensitive to organic solvents.

Supplier: Merck Millipore (Calbiochem‎)

Bilirubin conjugate, ditaurate is suitable as a direct bilirubin standard. It behaves similarly to purified bilirubin glucuronides from human bile in diazo tests.

Supplier: Merck Millipore (Calbiochem‎)

General proteolytic substrate. Provides a rapid, simple method for the detection of proteases in aqueous solutions.

Supplier: Merck Millipore (Calbiochem‎)

Biotinylated heparin contains 5 − 8 mole-percent biotin. Biotin attachment is through a 12-atom spacer arm containing a cleavable disulfide group.

Supplier: Biotium

Mix-n-Stain™ DNP antibody labelling kits utilise a technology that allows rapid antibody labelling with dinitrophenol without a purification step.

Supplier: Thermo Fisher Scientific

DyLight™ fluor-free acids are non-activated forms of selected DyLight™ fluorescent dyes for use as controls and calibration factors in fluorescence imaging applications. These non-activated fluorescent dyes contain the native carboxyl group of the standard dye molecule.

Supplier: Thermo Fisher Scientific

Cross linkers are used for the identification of near-neighbour protein relationships and ligand-receptor interactions. Homobifunctional, amine-reactive NHS esters or imidates, and heterobifunctional, amine-reactive, photoactivatable phenyl azides are the most commonly used crosslinkers for these applications.

Supplier: Biotium

Biotinylated probes for detection of His-tagged proteins immobilised on nitrocellulose membranes.

Supplier: Biotium

Mix-n-Stain™ Digoxigenin antibody labelling kits utilise a technology that allows rapid antibody labelling with digoxigenin without a purification step.

Supplier: Thermo Fisher Scientific

Maleimide-Activated Streptavidin is for directly preparing streptavidin-protein conjugates with proteins, peptides and other molecules that contain a free sulphhydryl (-SH) group. Streptavidin has been maleimide-activated using Sulpho-SMCC, a heterobifunctional crosslinker that contains an N-hydroxysuccinimide ester and a maleimide group. The activated streptavidin presents an available maleimide group that reacts with sulphhydryl-containing molecules.

Supplier: Tonbo Biosciences

Ghost Dye Red 710 is an amine reactive viability dye, that can be used to discriminate viable from non-viable mammalian cells in flow cytometry applications.

Supplier: Thermo Fisher Scientific

Pierce™ High Sensitivity NeutrAvidin™-HRP Conjugate is a specially prepared peroxidase conjugated form of avidin biotin binding protein that provides signal amplification like poly-HRP and exceptional storage stability.

Supplier: G-Biosciences

The HOOK™ Peptide Coupling kits allow researchers to attach peptides to a carrier protein of choice using either primary amines or sulfhydryls in their peptide. The HOOK™ Peptide Coupling kits can be supplied with or without carrier proteins.

Supplier: G-Biosciences

HOOK™ Biotin Reagent that conjugates to proteins through amines, sulfhydryls, carboxyls or carbohydrates. The amine and sulfhydryl coupling HOOK™ Biotin Reagents couple directly to the protein through their reactive groups, however the carboxyl coupling HOOK™ Biotin Reagents require a carbodiimide crosslinker and the carbohydrate coupling HOOK™ Biotin Reagents require carbohydrate oxidation before coupling.

Supplier: Merck Millipore (Calbiochem‎)

FluorSave™ reagent is an aqueous mounting medium for use in conjunction with fluorescent tracers such as fluorescein, rhodamine and phycobiliprotein probes.

Supplier: Biotium

A far-red passive reference dye for qPCR that frees up the ROX channel for use with JUN™ probes, EvaRuby™ qPCR dye, and other orange dyes.

Supplier: Thermo Fisher Scientific

The Pierce™ Immunostain Enhancer is compatible with fluorescent and chromogenic detection and routinely increases both signal intensity and detection sensitivity.

Supplier: Cytiva

Mono-reactive dye pack contains derivatised CyDye™ that carries only one reactive group on each dye molecule for accurate labelling of amine groups, for example on antibodies or oligonucleotides.

Supplier: Cytiva

Amersham™ CyDye™ fluors combine exceptional photostability with bright and intense signals, resulting in high sensitivity and a highly reproducible performance at a biologically suitable pH range of 3 to 10.

Supplier: Cytiva

Hydrazide esters provide a convenient method for the labelling of free carbonyl groups of glycoproteins and carbohydrates. For maximum convenience, stable active hydrazide esters are supplied and stored as solid material.

Supplier: Cytiva

CyDye Fluorescent Dyes are supplied as highly water soluble, reactive NHS esters for easy conjugation to biomolecules containing aliphatic amino groups.

Supplier: Cytiva

Mono-functional maleimides are particularly suitable for the selective labelling of molecules containing free sulfhydryl groups, such as cysteine residues in proteins and peptides and oligonucleotides.

Supplier: Cytiva

The Amersham™ QuickStain Kit contains a Cy™5 fluorophore and labeling buffer for easy detection of proteins in SDSPAGE gels and on Western blotting membranes. The ready to use Cy5 N-hydroxysuccinimide (NHS) ester and Tris labeling buffer ensure robust and consistent labeling for detection of proteins in diverse samples.