U hebt gezocht naar: Geleidbaarheidselektroden

Supplier: Hach

IntelliCAL™ CDC401 is een digitale, 4-polige geleidbaarheidssonde van grafiet. De sonde is beschikbaar in een standaard of een robuuste versie.

Supplier: VWR Collection

Elektrode, geleidbaarheid, VWR® pHenomenal®, pHenomenal® CO11, 10 µS/cm - 20 mS/cm, 0...+80 °C, Epoxy, Ø×L: 15,3×120 mm, 0,84 cm^-1, 8-pins, 1,5 m kabel

Supplier: VWR Collection

Deze IDP (Intelligent Digital Probe) geleidbaarheids-/temperatuurcel kan worden gebruikt met de pHenomenal® MD 8000 H en MD 8000 L multiparametermeters.

Supplier: VWR Collection

Elektrode, geleidbaarheid, VWR®

Supplier: WTW

The conductivity sensor LTC1/24 combines enhanced 2-electrode technology with rugged design in a 12 mm plastic body.

Supplier: WTW

TetraCon® 325, TetraCon® V and KLE 325 are suitable for on-site measurements in rivers, lakes and wastewater, fish farming, ground water measurements and applications in water laboratories.

Supplier: WTW

Analog conductivity measuring cells for wastewater are to be connected to analog transmitters.

Supplier: WTW

Hoogwaardige, verhoogde sensortechnologie gecombineerd met de meest recente meetelektronica. Voor gebruik met IDS-meters.

Supplier: WTW

Four-electrode plastic flow-through measuring cells with low-polarisation graphite electrodes for applications in closed circuits.

Supplier: SI Analytics

Robust conductivity cells for on-line measuring. Cells are either available with POM shaft or with glass shaft for high chemical resistance.

Supplier: Hach

This three-pole platinum cell with integrated temperature sensor is protected against harsh field conditions.

Supplier: Hach

Range of conductivity cells for a wide variety of applications.

Supplier: Mettler - Toledo

These conductivity probes with integrated temperature sensor (NTC 30 kΩ) are suitable for different sample types. They all provide automatic temperature compensation.

Supplier: Mettler - Toledo

High performance sensors combining robustness with state-of-the-art measurement technology. Compatible with either SevenExcellence™ and SevenCompact™ meters (663-0176/663-0177/663-0178) or with SevenGo Duo™ SG23 and SevenGo Duo pro™ SG78 meters (663-000/663-0145). Fully traceable.

Supplier: Mettler - Toledo

This digital conductivity sensor has a high precision temperature probe. The conductivity and temperature signals are digitised and combined through a special algorithm for unmatched conductivity accuracy.

Supplier: SI Analytics

These high-end conductivity cells are ideal for the monitoring and control of plants as well as the examination of ultrapure water in quality control labs.

Supplier: Mettler - Toledo

This conductivity measuring cell utilises the four- pole potentiometric method for measuring conductivity, which incorporates a series of four graphite poles embedded in the probe shaft. This design completely eliminates the polarisation, which frequently occurs with the two-plate amperometric method during measuring high conductivity solution.

Supplier: Hach

The 5062 is ideal for conductivity measurements in extreme conditions and for 'difficult' applications, including dirty and viscous samples. Dedicated for use with Hach sensION+ portable conductivity meters.

Supplier: KNICK

SE 202: sensor met 2-puntselektrode met geïntegreerde temperatuursonde (NTC 30 kohm) en doorstroomcel.

Supplier: EUTECH

Laboratory electrodes for measuring conductivity and temperature.

Supplier: EUTECH

Conductivity/temperature sensor with epoxy body and stainless steel rings. For use with the following Eutech meters: CON 700 / PC 700 / CON 2700 / PC 2700.

Supplier: Endress+Hauser

Toroidal conductivity sensor for harsh and aggressive media in the chemical industry.

Supplier: Thermo Orion

These durable and extremely accurate conductivity cells can be used under a wide range of conditions. Intended for field or laboratory use.

Supplier: Endress+Hauser

Digital toroidal conductivity sensor designed for harsh and aggressive media in the chemical industry.

Supplier: EUTECH

Elektrode, geleidbaarheid, 4-cell, ATC, Voor: General purposes, 0 - 500 mS, 0...70 °C, Epoxy, Ø×l: 12×100 mm, 1,0, DIN (8-pin), 1 m cable

Supplier: EUTECH

Elektrode, geleidbaarheid

Supplier: Endress+Hauser

A digital sensor for low measuring ranges, suitable for applications such as boiler feed water monitoring and chip cleaning. Benefit from its extended data storage functions that enable predictive maintenance.

Supplier: Hach

This three-pole platinum cell with an integrated Pt1000 temperature sensor provides accurate, stable results over a wide measurement range.

Supplier: YSI ENVIRONMENTAL

Dip type conductivity cells made from 7740 PYREX borosilicate glass. For use with the 3100 and 3200 conductivity benchtop instruments (cell adapter required).

Supplier: Thermo Orion

Measure samples with the utmost versatility using this 3-electrode conductivity cell, which has high, standard and low conductivity measuring ranges.