Multi-element standaarden
Avantor biedt een breed scala aan gecertificeerde kationische standaarden, speciaal ontworpen voor instrumentkalibratie in ionenuitwisselingschromatografie (IC)-toepassingen. Deze standaarden kunnen worden gebruikt voor milieu- of voedselanalyse en kwaliteitscontrole. IC is een analytische techniek voor de scheiding en kwantificering van anionen en kationen in watermonsters. Avantor biedt zeer zuivere, goed gedefinieerde referentiematerialen, ideaal voor kwantificering op laag ppm-niveau of voor sporenanalyse. Flesjes met kationische standaarden zijn verkrijgbaar voor een reeks elementen.
Atomic absorption Spectrocopy (AAS) standards, multi-element in oil, Certipur®, Supelco®
Supplier: Merck
Standards dissolved in oil are ready-to-use calibration standards for the analysis of non-aqueous matrices.
Expand 2 Items
Transition metal mix 3 for ICP, 7 elements, TraceCERT®, Supelco®
Supplier: Merck
Multi-Element Standard, Transition metal mix 3 for ICP, 100 mg/L, TraceCERT®, Supelco®, Matrix: 10% HCl, Applicatie: ICP-standaarden
Expand 1 Items
Rare earth element mix for ICP, 16 elements, TraceCERT®, Supelco®
Supplier: Merck
Multi-Element Standard, Rare earth element mix for ICP, 50 mg/L, TraceCERT®, Supelco®, Matrix: 2% HNO₃, Applicatie: ICP-standaarden
Expand 1 Items
Multi-element standard solution 6 for ICP, TraceCERT®
Supplier: Merck
This standard solution is intended for use as a certified reference material for ICP/AAS.
Expand 1 Items
Trace Metals 1-WP, certified reference material, Supelco®
Supplier: Merck
Multi-Element Standard, Trace Metals 1-WP, Supelco®, Matrix: 5% HNO₃, Applicatie: ICP-standaarden, AAS standaarden, Milieu standardaarden
Expand 1 Items
Periodic table mix 1 for ICP, 33 elements, TraceCERT®, Supelco®
Supplier: Merck
Periodic table mix 1 for ICP used as a standard for the quantitative determination of mineral composition in Tenualosa ilisha using inductively coupled plasma atomic emission spectroscopy (ICP-AES).
Expand 1 Items
Multi-element standard solution 1 for ICP, TraceCERT®, Supelco®
Supplier: Merck
Multi-element standard solution 1 has been used in the analysis of pollutants like trace elements in water using total reflection x-ray fluorescence (TXRF) method and inductively coupled plasma mass spectrometry(ICP-MS).
Expand 1 Items
VWR® ARISTAR®, Multi-Element Quality Control Standard 1 mg/L, 28 Elements in Nitric Acid 5% for ICP
Supplier: VWR Chemicals
28 elements 1 mg/L: Al, Ag, As, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sr, Ti, Tl, V, Zn.
Expand 1 Items
VWR® ARISTAR®, Multi-Element Calibration Standard 4 in Water with a Trace of Hydrofluoric Acid for ICP-MS
Supplier: VWR Chemicals
(12 Elements in H₂O with trace of HF ).
Expand 1 Items
VWR®, ICP multi-element solution
Supplier: VWR Chemicals
ICP solution of eight elements in 7% nitric acid.
Expand 1 Items
Multi-element standard solution 4 for ICP, TraceCERT®, Supelco®
Supplier: Merck
17 components
Expand 1 Items
Transition metal mix 2 for ICP, 8 elements, TraceCERT®, Supelco®
Supplier: Merck
Multi-Element Standard, Transition metal mix 2 for ICP, 100 mg/L, TraceCERT®, Supelco®, Matrix: 2% HNO₃/1% HF, Applicatie: ICP-standaarden
Expand 1 Items
Multi cation standard 1 for IC, TraceCERT®, Supelco®
Supplier: Merck
Multi-Element Standard, Multi Cation Standard 1 for IC, TraceCERT®, Supelco®, Matrix: 0,1% HNO₃, Applicatie: Ionenchromatografiestandaarden
Expand 1 Items
Trace Metals AA Sample 2, certified reference material, Supelco®
Supplier: Merck
Multi-Element Standard, Trace Metals AA Sample 2, Supelco®, Applicatie: Milieu standardaarden, Afvalwater, AAS standaarden
Expand 1 Items
Trace Metals-ICP Sample 2, certified reference material, Supelco®
Supplier: Merck
Multi-Element Standard, Trace Metals-ICP Sample 2, Supelco®, Applicatie: Milieu standardaarden, Afvalwater
Expand 1 Items
ICP multi-element standards, CertiPUR®, Supelco®
Supplier: Merck
Safety note: These solutions are generally in acid solution.



