U hebt gezocht naar: Fittingen en connectoren

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: Restek

Click-on connectors allow you to change traps quickly, without introducing oxygen into your system.

Supplier: Restek

These PressFit connectors feature ID-specific ends for better sealability and a defined fit.

Supplier: CADENCE SCIENCE

These tubing connectors are used in hospitals, laboratories, and biomedical instruments. The metal connectors are precision machined and are made from either nickel plated brass or 316 stainless steel.

Supplier: Restek

PTFE ferrule with fitting size 1,6 mm, PTFE, Boring Ø: 1,6 mm

Supplier: Restek

These ferrules can be used with Vacuum Vu-Union® connectors.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, U-660, replacement flangeless ferrule, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 5/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

Opmerking: gebruik geen metalen aansluitingen in kunststof openingen, omdat deze de opening kunnen beschadigen.

Supplier: VICI JOUR RESEARCH

Unions for easy connection of low pressure solvent lines.

Supplier: Restek

Valco®, Zero dead volume tee, Siltek®/Sulfinert® treated, 1/16”, Met Siltek® behandeld roestvrij staal

Supplier: Restek

These nuts are designed for Agilent 5890/6850/6890/7890 GCs. Nuts for use with standard ¹/₁₆" type ferrules are designed to fit a wider variety of ¹/₁₆" ferrules.

Supplier: OMNIFIT

Omnifit® threaded adaptors are a useful range of problem solving parts that enable to convert thread sizes quickly and easily, accepting a ¹/₄"-28 UNF male fitting at one end and a range of male and female thread types at the other.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: UPCHURCH SCIENTIFIC

PEEK ZDV (Zero Dead Volume) wartels: ZDV-wartels worden geleverd met twee losvaste F-300-aansluitingen voor een slang met een buitendiameter van ¹/₁₆" en zijn bestand tegen een druk van 5000 psi (344 bar).

Supplier: Restek

Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.

Supplier: Restek

Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass or 316 grade stainless steel.

Supplier: Restek

Replacement long nut connects stainless steel tubing to a Rheodyne® 6-port valve or other Rheodyne® part.

Supplier: Restek

Deactivated Press-Tight® connectors maintain complete inertness along the GC flow path and Siltek®-deactivated connectors are ideal for organochlorine pesticides analysis. These connectors fit 0,33 to 0,74 mm ext. Ø and 0,1 to 0,53 int. Ø columns.

Supplier: Restek

Ferrules with graphite construction for use with packed columns.

Supplier: Restek

This MSD source nut is made from brass. The 1,2 mm nut bore permits easy removal of ferrules with a standard tapered needle file. The material prevent thread-stripping on the transfer line, the design enhances ease of threading onto the transfer line and improves overall lifetime.

Supplier: VICI JOUR RESEARCH

Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: OMNIFIT

Gripper nut, PP, violet, for 1/16" tubing, PP

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: Restek

The tee with inverted cup design offers complete sample vaporisation and open-top design makes it easy to pack with glass wool, keeping sample residue from contaminating the cup.

Supplier: Restek

This split or splitless inlet adaptor fitting is suitable for capillary columns with internal diameter 0,53 mm. Makes column installation easy due to the nut protruding farther from the insulated injection port chamber.