U hebt gezocht naar: Fittingen en connectoren

Supplier: Restek

This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.

Supplier: Restek

These nuts and ferrules are used for Valco® connectors.

Supplier: Restek

These ¹/₄" compression end-fittings are compatible with ¹/₁₆" connecting tubing using Valco and Parker fittings.

Supplier: VICI JOUR RESEARCH

PPS hex-head nut, flangeless, for use with collapsible ferrule, for 1/8" O.Ø tubing or 1/4"–28 flat bottom ports, PPS

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: VICI JOUR RESEARCH

These nylon column end plugs fit all columns with 10-32 threads. The long design and threading down to the ferrule ensure safe closing of valuable columns.

Supplier: INTERNATIONAL CRYSTAL

Plugs, PTFE, for all IR liquid cells, PTFE

Supplier: Cole-Parmer

Cleanroom female Luer to hose barb fittings, straight adapter, ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of system.

Supplier: SEMADENI

PP, translucent.

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: Restek

EXP® reusable fittings for easy and reliable HPLC and UHPLC connections for 10 to 32 fittings and ¹/₁₆" tubing.

Supplier: MED NET

These luer to tube connectors are made of animal free PP.

Supplier: HWS LABORTECHNIK

Metal adapter, olive Ø 11 mm, with B execution, Metaal

Supplier: OMNIFIT

Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.

Supplier: Restek

Double connectors are used to effectively connect any click-on trap to a click-on indicator.

Supplier: SEMADENI

Connectors, T-piece, made of POM, white, strong design, temperature resistant up to 100 °C.

Supplier: SEMADENI

Connectors, Y-shaped, made of POM, white.

Supplier: UPCHURCH SCIENTIFIC

PEEK, roestvrij staal of PCTFE.

Supplier: UPCHURCH SCIENTIFIC

ETFE or PEEK.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, UH-750 VHP MicroTee for 360 μm OD tubing, 5/16-24 coned threads, 0,25 mm thru-hole, 84 nl swept volume, PEEK/stainless steel, Roestvrij staal

Supplier: OMNIFIT

Omni-Lok™ inverted cone fittings provide a simple, easy to use low-pressure connection. Only the ETFE cone is in the fluid path.

Supplier: VICI JOUR RESEARCH

These PEEK adapters connect standard LC fittings to standard LC ports, usable with most common organic and inorganic HPLC solvents without risking corrosion, metal contamination, or protein degradation.

Supplier: CADENCE SCIENCE

FLL to M5 × 6 mm thread (plated brass), Roestvrij staal, Schroefdraad: 0,125" NPT

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. 10-32 threads, for 1/16" tubing. Fingertight up to 350 bar (5000 psi).

Supplier: VICI JOUR RESEARCH

Fiberglass reinforced PP with PP washers. A number of chromatography systems still require or prefer flanged connections. When the tubing is flanged, the washer never comes in contact with the mobile phase.

Supplier: DWK Life Sciences

Hose connector, 13-425

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, Connector, tubing, P-801 barbed connectors for use with 1/16” I.Ø tubing, PP

Supplier: Restek

These internal cross are made of stainless steel. Used to connect four lines. Ideal for 1,6 mm OD tubing.