U hebt gezocht naar: Fittingen en connectoren

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing pieces made of aluminium.

Supplier: EDWARDS HIGH VACUUM METTLER

Elbows 90°, DN 10 mm, Aluminium

Supplier: VARIAN

Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge.

Supplier: VARIAN

PEEK fittings resists pressure up to 5000 psi and temperature of 100 °C.

Supplier: VARIAN

Ferrule, 0,53 mm to 0,53 mm ID, 15% grafiet, 85% Vespel®

Supplier: VARIAN

Vespel/graphite and precision graphite ferrules for chromatography applications.

Supplier: Agilent

These Press-fit capillary connectors are laser milled to provide highly reproducible taper angles throughout the length, ensuring an excellent seal.

Supplier: Agilent

These splitters are used for splitting an injected sample from a single injector into two columns and on to two detectors.

Supplier: EDWARDS HIGH VACUUM METTLER

Cross pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Blanking flanges made of aluminium or stainless steel.

Supplier: Agilent

These fittings for Shimadzu HPLC systems provide leak-free connections and prevent the loss of peak shape and resolution.

Supplier: Agilent

General purpose graphite ferrules, short, ferrule ID 1 mm, column ID 0,53 mm, Grafiet

Supplier: VARIAN

Female luer adapter to ¹/₁₆" fittings

Supplier: VARIAN

Biocompatible adapter, 1/16” to 1/8”, PEEK, with fittings, PEEK

Supplier: Agilent

These gas line connectors ensure stable, consistent usage and sensitivity for a range of ICP-MS applications.

Supplier: Agilent

UltiMetal Plus, Flexible metal ferrule UltiMetal Plus, for fused silica tubing, Metaal, Boring Ø: 0,4 mm, Tubing int.Ø: 0,1 - 0,25 mm

Supplier: Agilent

These connectors are equivalent to the PerkinElmer AA versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing cross, stainless steel, 130 mm, DN 40/25, Roestvrij staal

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Super Flangeless™, P-255x, nut, PEEK natural, 1/4-28 flat bottom port, for 1/16" or 1/32" OD tubing, PEEK

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-200x, replacement flangeless ferrule for 1/16" OD tubing, ETFE blue, 1/4-28 flat-bottom port, 2000 psi, ETFE

Supplier: Restek

These connectors can be used to connect a guard column to an analytical column, a column to a transfer line, two columns in series or repair a broken column.

Supplier: NEOLAB

These are required to attach threaded vials to ground joint apparatus such as rotary evaporators.

Supplier: Restek

Connector kits connects two analytical columns to a transfer line or guard column. They have a reliable seal integrity and will not unexpectedly disconnect during temperature programmed analyses. The open design allows visual confirmation of the seal for added confidence in the connection.

Supplier: Restek

Rugged MXT® low-dead-volume connectors are Siltek® treated to make them inert to active compounds. They can be used at temperatures up to 430 °C without degrading the deactivated layer.

Supplier: Restek

Internal tees are made of stainless steel are used to connect three lines. Suitable for 1,6 mm OD tubing.

Supplier: Restek

Internal uniona are made of 300 series stainless steel with end of tubing that seats squarely at bottoms of fitting details. Suitable for 1,6 mm OD tubing.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK polymer.

Supplier: VICI JOUR RESEARCH

PEEK two-piece fingertight fittings. Fits any 10 to 32 fitting. Works with any ¹/₁₆'' OD tubing.

Supplier: VICI JOUR RESEARCH

Plugs can be used to close off an unused port in a valve or manifold. Size ¹/₄ - 28".

Supplier: SEMADENI

Connectors, straight, conical shape and stepped, made of PP, wiith different fitting diameters on the two sides able to connect with tubing having different diameters.