1423 Results for: "Hoods"

Supplier: VWR Collection

Disposable non-woven hood is made of 20 gsm SPP fabric, and features a small open face hole.

Supplier: KOETTERMANN

LEV arm for wall mounting, pipe Ø: 75 mm, aluminium, elox, with transparent PETG round hood and wall bracket, Pour: Fume hoods

Supplier: ILC DOVER

The Sentinel XT® Clear Full Hood is a superior solution for protection in the pharmaceutical industry when compared to other PAPR masks and facepieces.

Supplier: KOETTERMANN

The pharmacy hood is a small hood, which was developed especially for the handling of hazardous substances in pharmacies. It complies with the requirements of section 4 (2) of the German Pharmacies Act and is ideally suited for handling dusty compounds or volatile chemicals. These hoods have been designed for safe handling of chemicals, mineral acids, concentrated and heated acids.

Supplier: LABCONCO

SpillStopper™ work surface, right rear cupsink cutout, 1829×762×32 mm, 93 kg, Pour: Laboratory Hoods, Protector®

Supplier: Heidolph Instruments GmbH & Co.KG

Flat hood

Supplier: THARMAC GmbH

Charcoal filter for fume hoods, Cellstain®

Supplier: ILC DOVER

Sentinel XE® PAPR (powered air-purifying respirator) with unique clear hood is specifically designed to delivery TH3 level protection to pharmaceutical and biopharmaceutical workers.

Supplier: ERLAB CAPTAIRE

Two plastic hinges

Supplier: THARMAC GmbH

Fume hood with activated charcoal filter, Cellstain®

Supplier: 3M

Capuches/coiffes, Replacement hood, Capuches/coiffes, Versaflo™, blanc

Supplier: VWR Collection

These poypropylene head and face covers are designed to protect users from potential environmental contaminations.

Supplier: VWR Collection

This flat hood is made from Quantus® Comfort fabric which is a high quality polyester fabric (100% polyester weave with conductive yarn) designed for critical cleanroom applications. The fabric provides a very high wearing comfort and at the same time a great barrier against particles (98% for airborne particles >0,3 μm).

Supplier: ERLAB CAPTAIRE

Accessoire pour hotte sans raccordement, Front panel

Supplier: LABCONCO

Adjustable base stand, telescoping, with casters 6' models

Supplier: LABCONCO

Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulphur compounds, or ammonia chemical fumes and vapours, as well as particulates. Air inside the enclosures passes through carbon filters, and in some cases additional HEPA particulate filters, before being safely exhausted back into the laboratory. No outside ducting is required.

Supplier: Avantor Fluid Handling

Place where convenient—ideal for limited spaces, hoods, or isolation chambers.

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: Bohlender

Anodized aluminium frame with panels made of polycarbonate.

Supplier: LABCONCO

Guardian™ 115 V, 60 Hz : 1000 digital airflow monitor for protector XVS and demonstration hood, Pour: —

Supplier: ERLAB CAPTAIRE

Filtre GF4/F

Supplier: LABCONCO

Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Supplier: LABCONCO

Protector® work stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator. Ideal for cramped or crowded labs, protector work stations have a low profile so they fit easily under standard upper cabinets. Designed with a built-in blower which use specially treated carbon filters.

Supplier: DuPont

This hood is not clean-processed and not sterilised made of Tyvek®, a flash spun high density polyethylene. The fabric is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size) and is ultra-low linting.

Supplier: Avantor Fluid Handling

Place where convenient—ideal for limited spaces, hoods, or isolation chambers.

Supplier: VWR Collection

Ces capuches plates sont fabriquées à partir de tissu Protect Xtra, une évolution du tissu Protect composé de toile de polyester 100% avec fil conducteur (chaîne). Ce tissu a été spécialement conçu pour une utilisation dans des zones critiques (par ex. les salles d'opération, les environnements stériles). Grâce à leur finition en PTFE, les cagoules offrent une très bonne protection contre les éclaboussures des liquides et les autres contaminations. Le tissu possède une bonne résistance à la traction et offre une très bonne résistance à la pénétration microbienne.

Supplier: Nitritex

These disposable hoods are made from antistatic lightweight and comfortable Clean-Tough™ material. They features a three-piece design to ensure a perfect fit. The extra-long yoke ensures maximum coverage and avoids contamination when entering the controlled environment when worn in combination with a coverall with collar.

Supplier: VWR Collection

Ce kit de vêtements à usage unique comprend une combinaison, une capuche, des surbottes et des manchettes de protection, tout en SMS respirable.

Supplier: ERLAB CAPTAIRE

Les nouvelles hottes à filtration sans raccordement Captair® Smart sont conçues avec un mode de communication simple et innovant. La communication lumineuse simple et intuitive de la technologie Smart indique l'état de la hotte.
Please complete the quote request to enable us to assist you in finding the right unit for your application.
https://be.cmd2.vwr.com/bin/public/fc/main?f=Y5&pimid=20532258

Supplier: ERLAB CAPTAIRE

Filtre de rechange pour hottes Captair®, F4PF10, Pour: —