"Batch Pressure Filter Cloth"

Supplier: CONTEC

These polyester cloths are ideal for the surface preparation prior to painting. Also suitable for particle removal in printed circuit board manufacturing and for eliminating solvents in some applications.

Supplier: Avantor Fluid Handling

Prevent leaks with the emergency shutdown design.

Supplier: Sartorius

Filtre, pour centrifugation

Supplier: Agilent

It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: Essity

These low-linting cloths made from viscose and polyester are ideal for polishing sensitive surfaces. The soft and flexible cloth releases polishing agents for a professional shine without leaving any traces.

Supplier: Thermo Fisher Scientific

Pressure gauge kit

Supplier: Cytiva (Formerly Pall Lab)

Supor® hydrophilic polyethersulfone (PES) membrane, acrylic housing: 0,2 µm vent. Positive pressure filtration of aqueous laboratory solutions. For sterilisation or clarification of up to three litres of serum-free cell and tissue culture media, media additives and other aqueous solutions. Ideal for sterilisation of solutions that tend to foam when filtered under vacuum.

Supplier: Essity

High quality wash cloths, ideal for washing, showering and general body care. They can be used with soap and water.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: Avantor Fluid Handling

UTMD’s BioPharm HP-PRT single-use pressure sensors measure the static and dynamic pressure of gases and liquids accurately and cost effectively and are available in pressure ranges up to 75 PSI.

Supplier: Merck

MicropreSure on-line filtration sampler improves in-process microbiological testing for bottled water. It uses the pressure in tanks or pressurized lines to process and collect samples through a microporous membrane within an enclosed chamber, securely locked without leaks.

Supplier: Merck

Porte-filtre, Pressure tubing with 6,35 mm NPT adapters, PE

Supplier: Brand

Borosilicate glass 3.3, amber, with glass stopper.

Supplier: PEAK SCIENTIFIC

The PG28L gas generator is suitable for laboratory detectors requiring CO₂ free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.

Supplier: Avantor Fluid Handling

Optimize performance of your GF+ Signet Transmitter/Controller.