Vous avez recherché : Raccords et connecteurs

Supplier: Restek

The tee is designed with a glass spiral to promote sample vaporisation and to provide even sample distribution to the two columns. The glass spiral also traps sample residue and minimises the need for guard columns. A Press-Tight® taper in each outlet leg facilitates a perfect dead volume free connection to each analytical column and allows visual confirmation of the column connection.

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: KLS Martin Group

Couplings, tubing, Faucet coupling for water jet pump 1/2", Filetage: 12,7 mm

Supplier: SEMADENI

Hose connector, PE-HD, D = 9 mm

Supplier: SEMADENI

Connectors, Y- shaped, made of PP, natural color.

Supplier: Restek

Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.

Supplier: UPCHURCH SCIENTIFIC

Fabriqué en acier inoxydable ou PEEK.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, LT-135, ferrule, PEEK black/stainless steel, 10-32 coned port, for 1/16" OD tubing, 10000 psi

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: UPCHURCH SCIENTIFIC

Unions sans volume mort En PEEK: Ces raccords sans volume mort sont fournis avec deux vis étanches F-300 pour capillaire ¹/₁₆"" et sont conçus pour supporter une pression de 344 bar (5000 psi).

Supplier: OMNIFIT

Adaptateurs Luer, Cannelé pour tubes de parois souples d'un D.I. de 1/16"

Supplier: Thermo Fisher Scientific

Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: Restek

This MSD source nut is made from brass. The 1,2 mm nut bore permits easy removal of ferrules with a standard tapered needle file. The material prevent thread-stripping on the transfer line, the design enhances ease of threading onto the transfer line and improves overall lifetime.

Supplier: Restek

Swagelok®, Reducing union, Acier inoxydable

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: Restek

Deactivated Press-Tight® connectors maintain complete inertness along the GC flow path and Siltek®-deactivated connectors are ideal for organochlorine pesticides analysis. These connectors fit 0,33 to 0,74 mm ext. Ø and 0,1 to 0,53 int. Ø columns.

Supplier: Restek

Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass or 316 grade stainless steel.

Supplier: Restek

Ferrules with graphite construction for use with packed columns.

Supplier: Restek

This split or splitless inlet adaptor fitting is suitable for capillary columns with internal diameter 0,53 mm. Makes column installation easy due to the nut protruding farther from the insulated injection port chamber.

Supplier: Restek

Internal reducing union used to connect two sizes of tubing, using zero-dead-volume fittings on each end. Suitable for 1,6 to 3,2 mm OD tubing.

Supplier: Restek

Internal adapter made of stainless steel gives minimum volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Restek

The tee with inverted cup design offers complete sample vaporisation and open-top design makes it easy to pack with glass wool, keeping sample residue from contaminating the cup.

Supplier: Restek

Replacement long nut connects stainless steel tubing to a Rheodyne® 6-port valve or other Rheodyne® part.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1583 Adapter, 10-32 coned, female to 1/4-28 flat-bottom, female, 1 mm thru-hole, 0,60 µl swept volume, Acier inoxydable

Supplier: SEMADENI

Made of PP.

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: VICI JOUR RESEARCH

Les raccords PEEK à tête hexagonale à ferrule intégrée sont pratiques à installer avec la clé ValvTool et à associer avec les bagues couleurs Color-it.