Vous avez recherché : Raccords et connecteurs

Supplier: Restek

This split or splitless inlet adaptor fitting is suitable for capillary columns with internal diameter 0,53 mm. Makes column installation easy due to the nut protruding farther from the insulated injection port chamber.

Supplier: Restek

Internal adapter made of stainless steel gives minimum volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Restek

Internal reducing union used to connect two sizes of tubing, using zero-dead-volume fittings on each end. Suitable for 1,6 to 3,2 mm OD tubing.

Supplier: UPCHURCH SCIENTIFIC

Fabriqué en acier inoxydable ou PEEK.

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: Thermo Fisher Scientific

Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.

Supplier: Restek

Swagelok®, Reducing union, Acier inoxydable

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, F-354, nut, stainless steel, 10-32 coned port, for 1/16" or 1/32" OD tubing, flushnut, 5000 psi, Acier inoxydable

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1583 Adapter, 10-32 coned, female to 1/4-28 flat-bottom, female, 1 mm thru-hole, 0,60 µl swept volume, Acier inoxydable

Supplier: SEMADENI

Made of PP.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-309, plug for 1/4-28 flat bottom ports, standard knurl, Delrin®*, noir

Supplier: KLS Martin Group

Couplings, tubing, Faucet coupling for water jet pump 1/2", Filetage: 12,7 mm

Supplier: SEMADENI

Connectors, Y- shaped, made of PP, natural color.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-124H, fitting, micro headless knurl, PEEK blue, 6-32 coned port, for 360 μm OD tubing, 5000 psi, PEEK

Supplier: Restek

A critical orifice in the EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas required. This enables to skip the lengthy vent and pump-down cycle.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: Restek

These capillary nuts are made from brass or stainless steel.

Supplier: SEMADENI

Hose connector, PE-HD, D = 9 mm

Supplier: GILSON

The Gilson safe aspiration station Y-shaped tubing connector is for use with the Gilson safe aspiration station.

Supplier: Restek

Graphite Ferrules for Vu2 union connectors.

Supplier: Restek

These MXT® union connectors kits are suitable for connecting metal and/or fused silica GC columns.

Supplier: Restek

GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule - the ideal seal for GC applications.

Supplier: Restek

The tee is designed with a glass spiral to promote sample vaporisation and to provide even sample distribution to the two columns. The glass spiral also traps sample residue and minimises the need for guard columns. A Press-Tight® taper in each outlet leg facilitates a perfect dead volume free connection to each analytical column and allows visual confirmation of the column connection.

Supplier: Restek

CGA-specified nuts and nipples with internal frit, 6,35mm NPT nickel-plated brass.

Supplier: ELDON JAMES

These tees are made of Natural Kynar® material, which has a temperature range of −62 to +107 °C and a pressure of 260 psi at 21 °C

Supplier: WATERS

Raccords extensibles pour cartouche de garde intégrée de 10 mm

Supplier: Roth Carl

Tubing connectors made of PBT with EPDM flat seal. Ideal for fast, safe and leakproof connections of tubing to glass hose connectors and glass threads.