You searched for: Raccords et connecteurs

Supplier: SEMADENI

Connectors, T-piece, made of POM, white, strong design, temperature resistant up to 100 °C.

Supplier: SEMADENI

Connectors, Y-shaped, made of POM, white.

Supplier: SEMADENI

PP, translucent.

Supplier: Restek

Injector nut kit for Shimadzu 17A, 2010, and 2014 GCs.

Supplier: Restek

These finger-tight capillary column nuts made from high-quality stainless steel are an alternative to conventional column nuts. These fittings work best with graphite type ferrules and help prevent over tightening, which can cause graphite material to exude into the inlet.

Supplier: VICI JOUR RESEARCH

These PEEK adapters connect standard LC fittings to standard LC ports, usable with most common organic and inorganic HPLC solvents without risking corrosion, metal contamination, or protein degradation.

Supplier: OMNIFIT

Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.

Supplier: VICI JOUR RESEARCH

PEEK with titanium filter element.

Supplier: Restek

These internal cross are made of stainless steel. Used to connect four lines. Ideal for 1,6 mm OD tubing.

Supplier: HWS LABORTECHNIK

Metal adapter, M 16×1 thread, with A execution, Métal

Supplier: Restek

EXP® reusable fittings for easy and reliable HPLC and UHPLC connections for 10 to 32 fittings and ¹/₁₆" tubing.

Supplier: MED NET

These luer to tube connectors are made of animal free PP.

Supplier: VICI JOUR RESEARCH

Fibre de verre renforcée en PP avec rondelles en PP. Un certain nombre de systèmes de chromatographie requièrent encore ou préfèrent des raccords à brides. Dans le cas des tuyaux à bride, la rondelle n'entre jamais en contact avec la phase mobile.

Supplier: DWK Life Sciences

Hose connector, 13-425

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-200x, replacement flangeless ferrule for 1/16" OD tubing, ETFE blue, 1/4-28 flat-bottom port, 2000 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Super Flangeless™, P-255x, nut, PEEK natural, 1/4-28 flat bottom port, for 1/16" or 1/32" OD tubing, PEEK

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Unions et raccords en PEEK ou PTFE. Adaptateurs femelle vers mâle et filetage 10-32 vers ¹/₄-28.

Supplier: UPCHURCH SCIENTIFIC

Les adaptateurs en polymère PEEK permettent de raccorder les tubes péristaltiques aux tubes rigides ou semi-rigides standard

Supplier: SEMADENI

Connectors, straight, conical shape and stepped, made of PP, wiith different fitting diameters on the two sides able to connect with tubing having different diameters.

Supplier: Restek

Rugged MXT® low-dead-volume connectors are Siltek® treated to make them inert to active compounds. They can be used at temperatures up to 430 °C without degrading the deactivated layer.

Supplier: Restek

Connector kits connects two analytical columns to a transfer line or guard column. They have a reliable seal integrity and will not unexpectedly disconnect during temperature programmed analyses. The open design allows visual confirmation of the seal for added confidence in the connection.

Supplier: Restek

Internal tees are made of stainless steel are used to connect three lines. Suitable for 1,6 mm OD tubing.

Supplier: Restek

Internal uniona are made of 300 series stainless steel with end of tubing that seats squarely at bottoms of fitting details. Suitable for 1,6 mm OD tubing.

Supplier: Restek

These connectors can be used to connect a guard column to an analytical column, a column to a transfer line, two columns in series or repair a broken column.

Supplier: NEOLAB

These are required to attach threaded vials to ground joint apparatus such as rotary evaporators.

Supplier: VICI JOUR RESEARCH

Nécessaire pour boucher un port inutilisé ou obturer un capillaire. Filetage 1/4'-28.

Supplier: VICI JOUR RESEARCH

PEEK two-piece fingertight fittings. Fits any 10 to 32 fitting. Works with any ¹/₁₆'' OD tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-300x, replacement flangeless ferrule, ETFE yellow, 1/4-28 flat bottom port, for 1/8" OD tubing, 500 psi, ETFE