Vous avez recherché : Filtres de traitement des liquides

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Avantor

These filters are made from 100% PEEK.

Supplier: Bohlender

Bougie filtrante en PE poreux.

Supplier: Avantor

Le filtre à éluant Last Drop™ utilise un élément plat, qui est installé en parallèle au fond du réservoir, ce qui permet au filtre de tout absorber, sauf les derniers 2% d'éluant sans aspirer d'air dans le système. Le filtre se compose d'un élément de filtre en PTFE dans un boîtier inerte.

Supplier: Bohlender

Filtres d'aspiration avec membrane PTFE

Supplier: ROBU GLASFILTER

ROBU® degassing filter with integrated VitraPOR® filter ensures efficient solvent degassing with inert gases, combined with reliable filtration. Ideal for chromatography and analytical applications, it offers high chemical and thermal resistance.

Supplier: Bohlender

These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Supplier: ROBU GLASFILTER

ROBU® VitraPOR® solvent filter for HPLC provides precise and reliable filtration of solvents, ensuring optimal performance in high-performance liquid chromatography systems.

Supplier: IDEX RHEODYNE

Inlet filters are used to extract particles from the sample between the injector and the column.

Supplier: Sartorius

The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.

Supplier: MICROSOLV

Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.

Supplier: PerkinElmer

Solvent reservoir sparger, Acier inoxydable, Taille de pore: 40 µm

Supplier: Agilent

It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.

Supplier: VARIAN

This mobile phase inlet filter operates up to 500 °C and is compatible with halogenated solvents.

Supplier: Restek

Flow filters are designed to improve flow when filtering oil and grease samples. These filters can be used with Resprep® Diskcover-47 reservoir or any 47 mm glass sample reservoir.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: Restek

This slip-on inlet filter is made of 316 stainless steel tip with a tefzel collar seals to a corrosion-resistant 316 stainless steel filter element.

Supplier: VICI JOUR RESEARCH

La forme extra-plate de la crépine permet de prélever jusqu'au dernier ml votre phase mobile sans introduction d'air.

Supplier: VICI JOUR RESEARCH

The No-Met polyethylene filter is designed for applications involving the separation of biomolecules, with inert polymeric fittings for 1/8" tubing and a 20 µm filter effectively eliminating metal contamination from the fluid path.

Supplier: VICI JOUR RESEARCH

This safety air outlet filter regulates the pressure during helium sparging.

Supplier: VICI JOUR RESEARCH

Le filtre/barboteur dernière goutte combine la filtration et la diffusion. Le corps en PTFE contient un filtre à phase mobile et un élément de diffusion soit en acier inoxydable, soit en PTFE. La connexion vers le solvant se fait avec un tuyau de diamètre intérieur de 1,5; 2,2 ou 3,5 mm. Un raccord 1/4"-28 connecte une alimentation en hélium de 1/8" au barboteur de 10 µm. Les deux raccords sont en PEEK.

Supplier: Restek

A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to ¹/₈" Ext.Ø PTFE tubing when finger tightened onto the precision-machined filter holder.

Supplier: UPCHURCH SCIENTIFIC

Les crépines à canule sont totalement en acier inoxydable 316. Les crépines à raccords filetés possèdent des bouchons filetés Kel-F® (PCTFE).

Supplier: UPCHURCH SCIENTIFIC

Acier inoxydable, PEEK ou UHMWPE.

Supplier: Restek

The flat filter element sits parallel to the bottom of the mobile phase reservoir, allowing the filter to draw 98% of the mobile phase without drawing air into the system. Conventional cylindrical mobile phase filters begin to draw air into the system when approximately 10% of the solvent remains in the reservoir.

Supplier: Restek

These purge and trap spargers are designed for use with Tekmar purge-and-trap instruments only and manufactured to tight tolerances to ensure a leak-tight seal.