Vous avez recherché : Pompe

Supplier: LABCONCO

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: BUCHI

Diaphragm vacuum pump is made up PTFE and it is chemically resistant with a space saving design. It meets all the needs of vacuum generation. It is usable for multiple applications such as evaporation, drying, concentration, suction straining and filteration. It is a maximum longevity product due to robost and stable design and integrated ECO² mode.

Supplier: witeg Labortechnik

Water jet pumps made of brass and nickel-plated.

Supplier: EDWARDS HIGH VACUUM METTLER

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Supplier: EDWARDS HIGH VACUUM METTLER

Clean and overhaul kit

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: EDWARDS HIGH VACUUM METTLER

These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

Supplier: EDWARDS HIGH VACUUM METTLER

E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

Supplier: Sartorius

The hand operated vacuum pump made of PVC is used as practical vacuum source for outside of a laboratory.

Supplier: KLS Martin Group

Water jet pistol available individually or with a complete set.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Vacuum aspiration system. A plastic supporting plate with carrying handles and attachments for holding the vacuum-proof suction flask make the system compact and mobile at any time.

Supplier: BODE CHEMIE

Dosing pump with plastic mounts used for various size of bottles and 5 L cans.

Supplier: EDWARDS HIGH VACUUM METTLER

TIC Instrument controller is a compact control with a large, clear graphical display, an intuitive user interface and serial communications.

Supplier: schuett-biotec GmbH

The EcoVac safety-vacuum-system supports efficient work and increases the safety standard when working with infectious material in a laboratory.

Supplier: asecos

Solvent pump for filling of high purity liquids, removal of organic solvents and flavourings.

Supplier: Sartorius

The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet transfer pump is ideal for sample filtration in microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. This pump is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

Supplier: asecos

Stainless steel drum pump with PTFE seals. Drum pump with outlet hose 1,2 m and discharge arc. for flammable liquids electrically conductive. Can be used in Zone 0 and 1. Explosion group II A.

Supplier: asecos

This drum pump is used for filling high purity liquids. PTFE with stop cock.

Supplier: LUTZ PUMPEN

This pump set is specially adapted for pumping concentrated acids and alkalis such as chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite. Pump tube and nozzle in PVDF and drum adapter made from PP.

Supplier: MURRAY S

Dispensing pump is suitable for lotions, creams and gels.

Supplier: Heidolph Instruments GmbH & Co.KG

SP vario pump head cover

Supplier: EDWARDS HIGH VACUUM METTLER

This Active Digital Controller (ADC) is a compact single gauge controller with automatic recognizes compatible Edwards gauges, loads the appropriate look-up table and displays the pressure in commonly used vacuum units.

Supplier: EDWARDS HIGH VACUUM METTLER

The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10^-9 mbar.

Supplier: EDWARDS HIGH VACUUM METTLER

Model APG.
These gauges have a measuring range from atmosphere to 1×10⁻⁴ mbar and combine the gauge head and controller in one compact active unit.

Supplier: EDWARDS HIGH VACUUM METTLER

Active Inverted Magnetron gauge is a combined unit of the gauge-head and controller. This gauge operates as a cold cathode ionisation gauge, in which pressure is measured indirectly as a function of the current that flows in a Townsend discharge maintained in the body tube.

Supplier: HARVARD APPARATUS

The PHD 22/2000 syringe pump series gives you the lowest flow rates, the highest accuracy, the smoothest flow, advanced programmability from the keypad. Ideal for applications in drug/nutritional delivery, electrospinning, microfluidics/nanofluidics and mass spec calibration.

Supplier: B. Braun

The volumetric infusion pump Infusomat® Space is one of the basic building blocks of the Space system, designed for acute care adult and pediatric facilities.

Supplier: HARVARD APPARATUS

The Pump 11 Elite series sets a new standard for handling the challenges of new applications. It has served the research community as the work horse infusion pump for micro and macro fluidic applications including MS calibration, reactor dosing, animal drug/nutritional studies, cell injections, electrospinning and more.

Supplier: GILSON

The VERITY® syringe pumps provide speed and reliability to small- and large-volume, repetitive liquid transfers in HPLC, SPE, and other general liquid handling methods.

Supplier: Restek

These vacuum gauges are made of stainless steel wetted surfaces with rear mount.