Vous avez recherché : Tubes de détection de gaz

Supplier: Dräger

The data below is representative for use with an Accuro® pump, a hand operated bellows pump.

Supplier: Dräger

To measure the 'spot concentrations' of chlorine for use with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of acetone for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of nitrogen dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of xylene for use with an Accuro® pump. Cross sensitivity: Styrene, vinyl acetate, toluene, ethyl benzene and acetaldehyde are indicated, but with different sensitivities. No interference by:

Supplier: Dräger

To measure the 'spot concentrations' of sulphur dioxide for use with an Accuro® pump.

Supplier: Dräger

Qualitative determination of oxidisable substances including measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of hydrogen fluoride for use with an Accuro® pump.

Supplier: Dräger

Cross sensitivity: Styrene, vinyl acetate, acetaldehyde, acrolein, diesel fuel and furfuryl alcohol are indicated with a yellowish brown discoloration. 500 ppm octane, 5 ppm nitric oxide and 5 ppm nitrogen dioxide have no effect.

Supplier: Dräger

To measure the 'spot concentrations' of cyanide. After carrying out the ten strokes the reagent ampoule must be broken, the liquid transferred onto the white separating layer and carefully drawn through with two strokes in cyanide free air using the pump. The indicating layer must not become moist.

Supplier: Lenz Laborglas GmbH & CO.KG

Gas distribution tubes with central ring made of borosilicate glass 3.3.

Supplier: DWK Life Sciences

Ces tubes de distribution de gaz sont conçus pour les réactions entre les gaz et les liquides. Ils sont fabriqués en verre borosilicaté 3.3 DURAN® transparent.

Supplier: Bel-Art Products, a Part of SP

HDPE gas dispersion tube. Bell-mouthed fitting with a sealed-in, coarse porosity Fritware® PE disc at the large end.

Supplier: Dräger

Sampling activated tubes for direct measurement indication even with complex compounds and mixtures of substances in air investigations and gas analyses.

Supplier: SciLabware

These Pyrex® borosilicate glass tubes for the dispersion of gas in liquids with sintered thimble allow for the choice of porosities to achieve optimum gas bubble size.