Supplier: LGC Standards PROMOCHEM

River sediment - extractable metals, : N/A

Supplier: Mettler - Toledo

These combined reference standards are intended to reduce uncertainty, eliminate time-consuming and error prone sample transfer and facilitate fully automatic performance verification.

Supplier: Restek

The alaska UST method consists of 14 components they are benzene, ethylbenzene, 1-ethyl-2-methylbenzene, 1-ethyl-3-methylbenzene, 1-ethyl-4-methylbenzene, isopropylbenzene (cumene), n-propylbenzene, toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Thermo Orion

Water hardness standard for ISE calibration, Orion™, 100 ppm CaCO₃, : N/A

Supplier: Restek

The reported concentrations reflect the amount of aldehyde or ketone in the mixture.The concentration of derivatised aldehyde or ketone is not reported.

Supplier: CPACHEM

Standard de plomb, Lead [Pb] 1000 mg/L [HNO₃] Nitric acid 2 %, 1000 mg/L

Supplier: CPACHEM

Standard d'arsenic, Arsenic, 1000 mg/L, Matrice: 2% HNO₃

Supplier: LGC Standards PROMOCHEM

These calibration standards are intended for use in the determination of low level nitrogen by ASTM Method D4629.

Supplier: LGC Standards PROMOCHEM

BTEX - Loamy Sand 1, (5 analytes), : N/A

Supplier: LGC Standards PROMOCHEM

These standards are intended for use in the determination of fuel (diesel fuel or gasoline) in used engine oils by GC, IR, fuel dilution meter (fuel sniffer), or flash point analyser. They are prepared gravimetrically from well-characterised fuels and hydrocarbon oils, and are verified by GC-FID in accordance with ASTM Method D3524 or D3525.

Supplier: CPACHEM

The colour standard is specially intended for use in testing ChP and monographs. This solution was produced according to the specifications using ChP reagent quality components and water meeting the ChP monograph requirement for purified water.

Supplier: LGC Standards PROMOCHEM

Hard drinking water UK low level metals, : N/A

Supplier: LGC Standards PROMOCHEM

These standards are intended for use as calibration and reference standards for the determination of fatty acid methyl esters (FAME) biodiesel content in diesel fuel by infrared (IR) spectroscopy. They are formulated specifically for use with ASTM Method D7371 and EN 14078.

Supplier: LGC Standards PROMOCHEM

This product is intended for use as a quality control check for methods related to total suspended solids (TSS), total dissolved solids (TDS), and total solids (TS).

Supplier: LGC Standards PROMOCHEM

Custom blend S-21+K, CONOSTAN®, 885 ppm

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended primarily for use in the evaluation of methods used for the analysis of sludges and other materials of a similar matrix.

Supplier: LGC Standards PROMOCHEM

This product is intended for use as a quality control check for methods related to hardness measurements includes calcium, magnesium, sodium, calcium hardness and total hardness as CaCO₃.

Supplier: M S A

The gas mixture in calibration gas cylinder is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.

Supplier: LGC Standards PROMOCHEM

Colour standard solution Pt-Co, Pt-Co, 500 units colour

Supplier: LGC Standards PROMOCHEM

These are intended primarily for the evaluation and calibration of methods for analysis of cements and materials of similar matrix.

Supplier: LGC Standards PROMOCHEM

Standard de sulfide, CONOSTAN®, Soufre, Matrice: Mineral oil, Applications: Industriel

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.

Supplier: LGC Standards PROMOCHEM

NIST-107C, cast iron (Ni-Cr-Mo)

Supplier: REAGECON

Gasoline calibration standard (three compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. This product is prepared gravimetrically on a weight/volume basis to a specification of ±2.5%

Supplier: CPACHEM

Shelf life on ship date: 24 months - store in a refrigerator at temperatures between 2 to 8 °C.

Supplier: LGC Standards PROMOCHEM

Standard de lithium, 100 µg/ml, Lithium, Matrice: 2% HNO₃

Supplier: LGC Standards PROMOCHEM

NIST-2890, water saturated octanol, NIST

Supplier: Restek

Kerosene composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.

Supplier: WTW

Standard de zinc, Zinc standard solution, 1000 mg/L