Vous avez recherché : Chromatographie, Pièces de rechange

Supplier: Restek

These assemblies meet original equipment manufacturer's performance.

Supplier: Restek

For use with Parker Balston® zero air generators.

Supplier: Restek

The oven sensors works in conjunction with the oven control board to regulate oven temperature.

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.

Supplier: Restek

This direct injection liner adapter uses standard 1,59 mm capillary nut and ferrules. Can be used with Agilent or Restek direct injection glass inserts or Restek direct injection uniliner liners for an Agilent 5890 packed column GC.

Supplier: Restek

This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Restek

Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 method 3545 and pressurised fluid extraction (PFE).

Supplier: Restek

This HPLC PEEK performance kit is a useful complement for the HPLC system.

Supplier: Restek

This sample delivery system is used to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge or to a disk on a vacuum manifold system for extraction or cleanup.

Supplier: Restek

These adapters are made of high quality stainless steel.

Supplier: Restek

FID maintenance kits for use with Agilent 6850, 6890, and 7890 GCs.

Supplier: Restek

Siltek base screws, Pour: Agilent 5890/6890 GC split/splitless injector

Supplier: Restek

These FID capillary column adapters made of stainless steel are ideal for PerkinElmer Auto SYS XL.

Supplier: Restek

Carriage motor belt for Agilent 7673A, 7673B and 7673C autosamplers.

Supplier: Restek

In-line filter, 7 µm, Siltek treated

Supplier: Restek

Installation kit for 1 mm ID columns; for valve applications, Kit contains 1× Valco nut 1,58 mm, 1× stainless steel nut 1,58 mm, 1× Vespel/graphite ferrule 1,58 mm, 1× graphite ferrule 1,58 mm, 1× stainless steel ferrule, 1× stainless steel front ferrule 1,58 mm, 1× stainless steel back ferrule

Supplier: Restek

Trident direct system can be used to select the right level of protection for analysis. It provides the protection against particulate matter and moderate protection against irreversibly adsorbed compounds.

Supplier: VICI JOUR RESEARCH

The ChromBox is an all-purpose analytical spare parts kit for HPLC. It contains the most often used spare parts made both of high quality Type 316L SS as well as PEEK and PTFE.

Supplier: Restek

Set the column flow rate by injection the methane and optimising linear velocity is preferred method for establishing reproducible retention times.

Supplier: VICI JOUR RESEARCH

Dans les applications LC impliquant des protéines, des peptides, des acides nucléiques ou d'autres échantillons d'origine biologique, les systèmes métalliques peuvent interagir avec les échantillons. Le kit de démarrage PEEK facilite le remplacement des tubes, fixations, ferrules, filtres de phase mobile et autres éléments en acier inoxydable afin de créer un environnement biocompatible pour les échantillons et la phase mobile.

Supplier: Restek

Inlet maintenance kit for use with Agilent GCs.

Supplier: Restek

The UHP pulse dampener made up of stainless steel fluid path.

Supplier: Restek

Isolation seal, Pour: 7010

Supplier: Restek

These kits are used for start-up and maintenance in all HPLC systems.

Supplier: DOMNICK HUNTER

Kit de maintenance 4000 heures pour tout les LCMS

Supplier: Restek

Uniliner® liners must be used with a Uniliner® liner adaptor for ¹/₄" injection ports.

Supplier: Restek

This reservoir kit is used to restore the performance of bonded-phase capillary columns by dissolving and removing soluble, nonvolatile residue. The rinsing reservoir is equipped with 6,4 mm inlet and outlet connections and includes a built-in fritted disk to prevent particulate matter from contaminating the column.

Supplier: Restek

Packed column inlet adapter kits center columns perfectly in 6,35 mm injection ports to eliminate bent syringe needles.

Supplier: Restek

These injector adapters made of stainless steel are ideal for PerkinElmer CAP injector.

Supplier: PEAK SCIENTIFIC

Annual service kit for Genius NM32LA, 1022, 1023