Supplier: Agilent

CrossLab piston seal/support ring kit, normal phase, Pour: Thermo UltiMate 3000 ISO-3100A, LPG-3400A/M, DGP-3600A/M, and HPG-3x00A/M, ISO-3100SD, LPG-3400SD, DGP-3600SD, and HPG-3x00 pumps

Supplier: VARIAN

Inlet sleeve, gooseneck, GWOL

Supplier: VARIAN

PTFE filter disks, 6,3 mm, markers TD

Supplier: VARIAN

Seal kits are available in various capacity based on the pump head sizes.

Supplier: Agilent

Vespel is a polyimide with low wear and high chemical resistance. Vespel tolerates a pH range of 0 to 10.

Supplier: VARIAN

ICP-OES supplies and accessories help you maintain the superior performance of your ICP-OES System.

Supplier: Agilent

These performance maintenance kits for Dionex HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

Column nut adapter, graphite

Supplier: Agilent

The kit contains needles, ferrule and a needle holder.

Supplier: Agilent

These torch supplies are equivalent to those from PerkinElmer ICP-OES for complete confidence.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

All the parts required to connect solvent bottles to your HPLC instrument.

Supplier: Agilent

A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: Agilent

The mixing/separation assembly is a perfect match for your PerkinElmer FIMS/FIAS system.

Supplier: Agilent

MP-AES Sample Kits provide convenient kits for handling aqueous/acidic and organic samples. Select the appropriate one for your application.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

A range of accessories and supplies for skimmer and sampling cones for use with our ICP-MS portfolio.

Supplier: Agilent

PEEK rotor seal for 3725 series

Supplier: Agilent

Loop, 100 µl, stainless steel, with Swagelok fittings

Supplier: Agilent

Sample probe, 0,3 mm Int. Ø, black band, Pour: ASX-500 autosampler series

Supplier: Agilent

Before ordering parts for FID maintenance, determine which type of FID is installed on your GC. The FID is available in two versions: Dedicated, capillary optimized: for capillary columns only. Adaptable: for packed or capillary columns.

Supplier: Agilent

nebuliser, MiraMist, PTFE, Agilent 7500/7700 and 8800 series ICP-MS, when ordered for the 7500a, the spray chamber end cap, p/n G1833-65475, is also required

Supplier: Agilent

These are the supplies you need for your Markes Thermal Desorber.

Supplier: Agilent

These gas line supplies add stability and functionality to even the most basic ICP-MS System calibrations.

Supplier: Agilent

The HSDC is comprised of a fused silica cell body and removable capillaries. The light path through the cell is made from black fused silica which significantly minimizes stray light and defines the aperture for the diode-array spectrometer.

Supplier: Agilent

Features and specifications for the Intuvo Guard Chips.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Agilent

These spray chambers and supplies are fully compatible with your PerkinElmer ICP-OES.

Supplier: Agilent

Filters for PerkinElmer ICP-OES systems.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.