Vous avez recherché : Fioles

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: LA PHA PACK

Flacons en verre clair et ambré à fond plat ou arrondi et volumes de 5 à 20 ml et bouchons. Un flacon à fond arrondi est plus robuste et résistant aux pressions élevées pendant le processus de chauffage. Les flacons à fond plat sont plus adaptés pour certains instruments.

Supplier: SAVILLEX

PFA vials with round or conical interior.

Supplier: THERMO NATIONAL SCIENTIFIC

These crimp/snap top low volume sample vials can be used with 6, 7 and 8 mm autosampler trays. They are made of borosilicate glass, type 1, class A.

Supplier: THERMO NATIONAL SCIENTIFIC

Shell vials are an economical choice for many routine HPLC applications. Vial selections include clear glass, amber glass or polypropylene. 8×35 mm shell vials are designed specifically for Alcott Positive Displacement autosamplers.

Supplier: Restek

Convenience kits with black PP open-hole caps and 8 mm red PTFE/silicone septa.

Supplier: Restek

Vial kits with 8 mm/425 screw-thread, unmarked vials, septa and caps (caps are attached to vials).

Supplier: Restek

Crimp-top plastic vial with 100 µl glass or PP fused insert.

Supplier: Restek

Screw thread vials made of plastic with 100 µl inserts.

Supplier: IONICS

TOC vials are designed for use in critical pharmaceutical applications such as USP, EP, JP and KP water testing.

Supplier: THERMO NATIONAL SCIENTIFIC

These sample storage unassembled convenience kits save time during sample preparation.

Supplier: LA PHA PACK

Flacons, fermetures, septums et kits.

Supplier: DWK Life Sciences

These vials made of PP uses either aluminum crimp seals or plastic snap cap closures, which eliminate the need for crimping and decapping tools, and provide a larger target area.

Supplier: BOETTGER PAUL

Optically clear vials with parallel surfaces, free of dust or particles.

Supplier: PerkinElmer

Manufactured from Type I borosilicate glass, which meets all USP, JP, and EP Pharmacopeia requirements. These vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.

Supplier: LA PHA PACK

Ces flacons sont utilisés de préférence sur des instruments des fabricants suivants: Agilent, CTC, DANI, Dionex, Jasco, Shimadzu, Spark, Thermo Scientific, Varian, VWR®/Hitachi, Waters®.

Supplier: THERMO NATIONAL SCIENTIFIC

These headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. Use Tin plate seals with magnetic pick autosamplers. Pressure release seals are designed to open when internal pressures exceed 3,0 ±0,5 bar, protecting equipment during analysis of highly volatile samples.

Supplier: LA PHA PACK

Ces flacons sont utilisés de préférence sur des instruments des fabricants suivants: Alcott, Gilson, Shimadzu, Waters® (carrousel Wisp 96 et 48 positions respectivement).

Supplier: NEOLAB

Due to their technical geometry, the neochrom® threaded vials with ND9 can be used on all popular autosamplers.

Supplier: THERMO NATIONAL SCIENTIFIC

Thermo Scientific™ national EPA vial convenience kits are designed for discrete water sampling applications.

Supplier: Restek

Screw thread vial with big mouth step vial system has a larger inner diameter than conventional vials and incorporates a neck finish that is uniquely designed to allow the insert to be precisely aligned in the center of the vial. This precise alignment provides maximum sample withdrawal and eliminates any chance of missed injections.

Supplier: Restek

Screw thread vials fits all 2,0 ml, 12×32 mm vial based autosamplers and provide most secure environment for your sample because evaporation is minimised.

Supplier: Restek

Crimp top snap seal vial with white graduated marking spot.

Supplier: THERMO NATIONAL SCIENTIFIC

Vial insert, 0,20 ml, Verre, Ø×h: 5×29 mm, Fond conique, Non stérile, Avec bouchon: Non

Supplier: MURRAY S

Ces flacons sans bouchon sont fabriqués en verre neutre.

Supplier: STERILIN

Vial insert, 6,00 ml, PP, Ø×h: 14,5×58 mm, Fond plat, Non stérile, Avec bouchon: Oui

Supplier: WATERS

Chromatography vial, Screw neck, external thread, 2,00 ml, Verre, incolore, Ø×h: 12×32 mm, Non stérile, Avec bouchon: Oui, Septum: PTFE/silicone

Supplier: WATERS

Vial insert, 0,15 ml, Verre, Fond conique, Non stérile, Avec bouchon: Non

Supplier: SARSTEDT

These scintillation vials with screw cap are made from HDPE.

Supplier: WATERS

Vial insert, 0,15 ml, Verre, Ø×h: 8×40 mm, Non stérile, Avec bouchon: Non