"Water"

Supplier: Merck

The Milli-Q® HR 7060 system is a high-throughput standard water purification solution that can reliably meet the diverse needs requiring reverse osmosis (RO, Type 3) pure water - for a single laboratory or an entire research facility.

Supplier: VWR Collection

Pure and Ultra Pure Water System, VWR®, P pack for harder water

Supplier: VWR Chemicals

A ready to use, liquid product designed to stabilise and protect water baths, cooling circuits, water circuits and incubators.

Supplier: MP Biomedicals

Deionized water treated with 0.001% diethylpyrocarbonate (DEPC). Filtered through 0.2 micron filter and autoclaved to yield a sterile solution completely free of detectable DNase (both exo and endo) and RNase.

Supplier: JULABO GmbH

PURA stainless steel water baths are functional and reliable for everyday operations due to their high material and component quality. The easy to use PURA water baths offer a number of functions and features that enable efficient use in the laboratory.

Supplier: Merck

Reliable water purification for results reproducibility and lab productivity.

Supplier: BURKLE

This water jet pump is used for withdrawing liquids and gases, and for creating a vacuum. It is made from PP, PTFE, FKM.

Supplier: Merck

Water sensor, For: Ultrapure water system, Milli-Q IQ 7000

Supplier: Merck

Pure and Ultra Pure Water System, Milli-Q®, Milli-Q polishing kit for purified water (also compatible with Milli-Q® IQ/EQ 7000 and EQ 7008/16 ultrapure water systems fed with purified water), Water quality (Type): Type II (pure water), Type I (ultra pure water)

Supplier: Spectrum Chemical

Chlorine Water, Saturated Solution, Approx. 0.4 Percent Chlorine, U.S.P. Chlorine Test Solution is a Spectrum solution concentrate that allows the preparation of fresh, reliable standard volumetric solutions quickly and accurately.

Supplier: VWR Collection

Unstirred water baths with double walled, stainless steel (inner) and coated steel sheet (outer) housing. All baths except the 2 litre models feature a drain tap for convenient emptying and are suitable for use with water or alternatively with heat transfer beads. Baths with a capacity of 5 litres or more have a heat transfer bead mode which is activated through the main menu. A drain stopper (plug) is supplied as on optional accessory to ensure heat transfer beads do not get stuck in the drain outlet. Note: Baths are classified Safety Class 1, allowing unattended operation when used with non flammable liquids.

Supplier: Merck

Milli-Q® EQ 7008/7016 ultrapure and reverse osmosis (RO, Type 3) water systems are designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ.cm at 25 °C; total organic carbon (TOC) ≤5 ppb] direct from a tap water source. Final ultrapure water quality can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab.

Supplier: Merck

LiChrosolv® hypergrade is accurately tested for LC-MS suitability, meeting all the requirements of modern LC-MS ionisation methods (ESI / APCI - positive and negative mode).

Supplier: Merck

Economical water system, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 l/min. For clinical analysers with pure water needs up to 480 L daily

Supplier: Merck

The Milli-Q® SQ 240C water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a flexible handset dispenser to deliver ultrapure water. It can also be equipped with a gravity valve (optional) to dispense pure RO water directly from the SQ Switch 3,5 L tank base.

Sale

Supplier: Merck

Pure and Ultra Pure Water System, Milli-Q®, Q-POD® remote dispenser, Water quality (Type): Type II (pure water), Type I (ultra pure water)