1062 Results for: "VACUUBRAND"

Supplier: VACUUBRAND

Rotary vane pump oil, B
Rotary vane pump oil, B has excellent viscosity characteristics and low vapour pressure. Its exceptional chemical resistance, more stable behaviour when pumping oxidants, acid and alkaline vapours, and the fact that it is better tolerated on contact with skin, sets this oil apart from conventional mineral oils. Even after continuous operation for several weeks and months, the oil ensures the pressure is maintained constantly. Used for priming all RE/RZ series pumps.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Chemistry hybrid pump, RC 6

Supplier: VACUUBRAND

PTFE vacuum hose is antistatic. The inner side of the PTFE hose is smooth for increased chemical resistance, reduced deposits, and high conductance.

Supplier: VACUUBRAND

These small flanges with thread made of stainless steel.

Supplier: VACUUBRAND

Accessories for rotary vane pumps, RE/RZ

Supplier: VACUUBRAND

These flanges are made from aluminium or plastic.

Supplier: VACUUBRAND

Vacuum diaphragm pump, Conversion kit for remote pump control with CVC 3000

Supplier: VACUUBRAND

This very compact chemistry pumping unit is an excellent solution when working with high boiling solvents. Typical applications are vacuum generation for rotary evaporators, vacuum concentrators and filtrations. With the continuously variable jog wheel, the pumping speed is manually adjustable to the process requirements. There are two optional kits available to easily upgrade the PC 3001 basic to the fully functional PC 3001 VARIOpro complete with CVC 3000 vacuum controller, inlet separator and vapor condenser at the outlet (please contact Avantor for further information).

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

Exhaust vapor condenser EK 600; with round bottom flask 500 ml, with KF DN 25, for VACUU·PURE®, connection for cooling water: 2×hose nozzle DN 6 - 8 mm, exhaust: hose nozzle DN 19 mm

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: VACUUBRAND

These high vacuum pumping units are highly uselful in successful and time-saving work in many science laboratories. The powerful rotary vane backing pumps generate the necessary backing pressure so that the diffusion pump can always attain its full pumping speed and an ultimate vacuum of approx. 10^-6 mbar (measured with pump fluid DC 704 and cold trap with liquid nitrogen). The pumping unit HP 40B2 with RZ 6 provides higher pumping speed in the pump down phase and is additionally equipped with an oil mist filter FO.

Supplier: VACUUBRAND

Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

These centring and sealing rings for small stainless steel flange KF connections. With aluminium sealing ring.

Supplier: VACUUBRAND

Rubber.

Supplier: VACUUBRAND

High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side.

Supplier: VACUUBRAND

VACUUBRAND VARIO® technology - frees you up for other tasks. The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes predefined applications for all common vacuum processes.

Supplier: VACUUBRAND

Service kit for ME 2 NT includes diaphragm, valves

Supplier: VACUUBRAND

Rotary vane pumps from VACUUBRAND offer great performance in a compact design. Even with the gas ballast open, they enable a very good ultimate vacuum. You also benefit from extended oil change and maintenance intervals thanks to optimised lubrication circuit and large usable oil volume.

Supplier: VACUUBRAND

This VARIO® chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pump´s motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance.

Supplier: VACUUBRAND

Model PC 8/MV 10C
With its built-in four-stage chemistry diaphragm pump MV 10C (for technical specifications and full description, please see catalogue no. 181-0025), this vacuum pump unit achieves an oil-free vacuum down to 0,9 mbar. It is used for applications with high requirements in terms of final vacuum and pumping capacity in chemical laboratories, technical colleges or small production plants, e.g. extracting and transferring of aggressive gases, distillation, vacuum drying etc.

Supplier: VACUUBRAND

Measuring Cable for Vacuum Gauges

Supplier: VACUUBRAND

Reducing cross pieces with small flanges KF made of aluminium or stainless steel.

Supplier: VACUUBRAND

The three-stage VARIO-SP® diaphragm pumps, with its variable speed drive system, attains significantly higher pumping speed and a better ultimate vacuum than the corresponding fixed speed pump. The brushless motor (maintenance-free) enables easy integration of the pump into other equipment, and operation independent of line voltage. The motor speed is either fixed or can be adjusted externally via electronic control signals for adaptation to process requirements.

Supplier: VACUUBRAND

Vacuum pump units with a two or three-stage chemistry diaphragm pump. Compact construction with chemistry diaphragm pump on base plate, separator on suction side made of glass with protective coating (AK), one or two electromagnetic chemistry valves on the suction line, exhaust waste vapour condenser with collecting flask, and one or two CVC 3000 vacuum controllers on the controller support.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

These elbow pieces with small flanges are made of aluminium or stainless steel.