290 Results for: "Single-use Temperature Sensor"

Supplier: tempmate

Pre-programmed. Intuitive multi-use temperature and humidity logger for reliable low-cost cold chain monitoring. For temperature and humidity recording with internal or external temperature and humidity sensor, multifunction display and automatic PDF report generation.

Supplier: Hach

IntelliCAL™ ISENA381 is a digital combination sodium ion selective electrode (ISE) with a refillable double junction reference and built-in temperature sensor. The probe is intended for laboratory use.

Supplier: EUTECH

pH electrodes for use with all pH meters with BNC input connector.

Supplier: Hach

This digital, combination gas-sensing ammonia ion selective electrode (ISE) with replaceable membrane module, refillable outer body, double junction reference and built-in temperature sensor is intended for laboratory use.

Supplier: Hach

These combination electrodes feature a low maintenance 3-in-1 design for the most challenging applications. Equipped with an integrated Pt1000 temperature sensor they provide stable results with low maintenance requirements.

Supplier: Thermo Orion

This electrode with built-in temperature sensor is ideal for any application where the use of metallic reference electrodes would contaminate the samples. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.

Supplier: Hach

These digital combination electrodes feature a built-in temperature sensor and are either refillable or non refillable. They can be used with all Hach HQd™ meters.

Supplier: Thermo Orion

These versatile 3-in-1 pH/ATC (automatic temperature compensation) probes can be used in either the field or a plant.

Supplier: schuett-biotec GmbH

The Schuett Solaris is the perfect solution to avoid using naked flames or if gas cartridges are not available. The unit uses standard electrical power and reaches the safe working temperature of 900 to 1300 °C within seconds. No warm-up time, no excess heat, no energy consumption between work cycles. Start is generated by an infra-red sensor, which allows efficient one-handed operation. The integrated timer can be set to 5 or 7 s. Pathogenic material is kept inside the sterilisation chamber. No spreading, no sooting. Ideal for use in Laminar Flow Cabinets. Working angle can be adjusted. Robust and sturdy, no parts subject to mechanical wear, ideal for mobile operation in the field.

Supplier: HUBER

The Variostat can control the temperature of any size bath from −30 to 150 °C. The special construction gives the user flexibility in a number of different applications. With the infinitely controllable VPC pressure or suction pump, circulation in the respective bath sizes can be adapted for optimum results. Furthermore, the pump pressure for external applications can be set and controlled using the menu control with an optional pressure sensor. Insulated bath vessels are available in stainless steel as an accessory in three standard sizes or can be custom made with any desired dimensions.

Supplier: EUTECH

General purpose "3-in-1" pH/temperature combination electrode for use with CyberScan models (pH 10 / pH 100 / pH 200 / pH 500 / pH 1000 / pH 2000).

Supplier: Heidolph Instruments GmbH & Co.KG

Modular system for shaking, mixing and heating all in one. Any five kg shaker, e.g. Titramax 1000, Unimax 1010, Promax 1020, Duomax 1030 and Polymax 1040 can be combined with the incubator 1000 and a flat or high hood. The flat hood is recommended especially for microtitre plates, culture plates, small flasks, media bottles and Erlenmeyer flask up to 100 ml. The high hood is ideal for large flasks, media bottles and Erlenmeyer flasks up to 1000 ml. Hoods are made from transparent non-fogging PETG for easy viewing and immediate and convenient access to vessels. The heating module is ideal for use in molecular biology, bacteria cultivation and DNA analysis, it has temperature regulation via a PT100 sensor, and safety circuits prevent overheating.

Supplier: Dräger

Ergonomic design and infrared sensor technology, the X-am 5600 is dedicated to the measurement of up to six gases (using dual gas sensors), employing from one to four sensors with one infrared sensor and three XXS EC sensors.

Supplier: DWK Life Sciences

WHEATON® CO₂ Incubators with an IR CO₂ sensor are ideal for everyday cell culture work and designed to be used with the WHEATON® Roller Apparatus.

Supplier: Thermo Scientific

Heracell Vios CR cleanroom compatible CO₂ incubators are third party-certified, suitable for use in ISO Class 5 and GMP Grade A/B environments.

Supplier: EUTECH

"General purpose "3-in-1" pH/temperature combination electrode for use with the following meters: pH 5 / pH 6 / pH 5+ / pH 6+ / pH 11 / pH 110 / pH 510 / pH 700 / pH 1100 / pH 2100 / pH 2700 / Ion 6 / Ion 6+ / Ion 510 / Ion 700 / Ion 2700 / PC 2700.

Supplier: HORIBA

These pocket meters incorporate a flat sensor technology, using the same measurement principle as traditional glass electrodes but in a small and compact flat format. The flat electrode enables quick and accurate direct measurements of solid or liquid micro samples as small as 0,1 ml μl (0,05 ml when using the sampling sheet). Large volume samples can also be measured easily by immersing the sensor.

Supplier: IKA

Digital block heaters which hold from one up to four aluminum blocks, provide precise temperature control in small vessels. The PT1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heaters are ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood/urea nitrogen determinations and in situ hybridisations.

Supplier: Thermo Orion

This general purpose combination electrode with toughened bulb and top-performance glass body can be used for precise pH determinations. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.

Supplier: Cole-Parmer

3505: Simple to use laboratory pH/mV/°C meter for use in general purpose and educational applications. It utilises rotary controls for mode selection and pH calibration. A novel design feature ensures that inadvertent movement of the calibration controls has no effect during sample measurement.

Supplier: Thermo Orion

This benchtop meter is ideal for a wide range of applications and advanced pH and dissolved oxygen analysis in the lab. It offers two measuring channels allowing users to measure pH and dissolved oxygen simultaneously or view each channel separately. Can be used with RDO optical or polarographic DO probes.

Supplier: SELECTA

The 'Digitronic' universal precision ovens of the 2000 series with microprocessor control and digital display of temperature with pre-set programmable run time and pre-set temperature monitoring using a Pt100 sensor probe. The inner chamber and pre-mixing chamber are made of AISI 304 stainless steel and epoxy coated exterior. The shelves are made of stainless steel, with adjustable height positions for shelves and guides and with flexible silicone door gasket around the entrance of the door. The homogeneously distributed shielded heating elements ensures complete air circulation throughout. The turbo fan made of AISI 304 stainless steel makes to circulate the air at the working temperature. The models are available either with toughened double safety glass door for viewing the contents of the oven without having to open the door or with the solid metal door.

Supplier: Mettler - Toledo

This unique digital pH electrode for lab use is really clever: by keeping track of the membrane and reference resistance as well as the average pH and temperature readings, the InLab® Smart Pro-ISM allows for preventative maintenance. Users can effectively save costs, increase uptime respectively.

Supplier: Thermo Orion

This general purpose pH electrode can be used to measure general pH samples as well as viscous or colloidal samples. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.

Supplier: Thermo Orion

This top performance pH electrode can be used to precisely perform pH determinations. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.

Supplier: Thermo Orion

These pH electrodes with semi-micro tip are ideal for use in clinical, pharmaceutical, and food labs, wherever sample size is a constraint. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.

Supplier: Cole-Parmer

Ideal for use in all laboratories where pH and conductivity analyses are required.

Supplier: Thermo Orion

This rugged, waterproof portable meter is designed for a wide range of pH, mV, ORP, dissolved oxygen and temperature testing and field applications. It can be used in the most demanding locations thanks to its IP67-rated housing. The meter offers two measuring channels allowing users to measure pH and dissolved oxygen simultaneously or view each channel separately.

Supplier: Thermo Orion

This general purpose, semi-micro tipped combination electrode with top-performance glass body can be used for precise pH determinations in micro volume samples. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.

Supplier: Thermo Orion

This general purpose combination electrode with toughened bulb and top-performance glass body can be used for precise pH determinations. Compared to conventional electrodes, the proven ROSS reference system exhibits superior stability in measurements, faster response, greater accuracy and precision when measuring samples that vary in temperature or when calibrating in temperatures that differ from the samples.