Supplier: Restek

These vial racks securely hold up to 36 headspace vials.

Supplier: Restek

These liners can be used with Agilent GCs.

Supplier: Restek

Cellulose or glass fiber filters for ASE 100/300 extraction cells.

Supplier: Restek

Gas sampling bags are whole air sampling devices useful for monitoring part-per million (ppm) levels of most volatile organic compounds (VOCs). Unlike Tedlar® bags, ALTEF bags do not produce background levels of dimethylacetamide (DMAC) or phenol. It features single eyelet and PP combo valve with hose connection to fit 4,7 mm ID tubing and syringe port with replaceable septum.

Supplier: Restek

Syringe filters with hydrophobic PTFE membranes and PP housing are used for organic solvents, acids, alcohols, bases and aromatics.

Supplier: Restek

These glass fiber disks are embedded with C18 or C8 bonded silica. Deep-pore design reduces clogging and allows faster flow rates. Semivolatile organic compounds can be etracted.

Supplier: Restek

This heater cartridge and PRT sensor can be used with 5890 FID and split/splitless weldments.

Supplier: Restek

These gas-specific purifier modules are optimised by incorporating a multiple-bed format that progressively lowers concentrations of contaminants at each successive bed. Replace separate oxygen, moisture and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen or air.

Supplier: Restek

Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.

Supplier: Restek

This unique grab sampler minimises connections and leaks and houses a critical orifice in the tee fitting.

Supplier: Restek

Veriflo controllers can be used with passive air samplers in maintaining a constant flow rate.

Supplier: Restek

Microseal septum incorporates two separate sealing mechanisms. These sliding seals eliminate septum coring and the resulting accumulation of septum crumbs in the injection port liner. The septum uses a 23-gauge (0,63 mm, 0,025”) needle or probe with a blunt, truncated conical tip. Since the syringe plunger end details are determined by manual or autosampler compatibility. The advantages of the septum include elimination of septum coring, longer life, consistent and low needle insertion force.

Supplier: Restek

These 6 mm frits are manufactured from fine, chromatographic grade 316 stainless steel and different sizes are available to fit most column and pore sizes. Compatible frit have to be chosen by checking its pore size with particle size of the packaging in the column.

Supplier: Restek

Chromatography vial, Headspace crimp neck, 20,00 ml, Glass, Clear, Ø×H: 23×75 mm, Non sterile, Cap included: No

Supplier: Restek

SGE syringes are designed and tested to meet critical autosampler performance needs. Needle point styles are designed to withstand multiple, rapid injections through a septum.

Supplier: Restek

These sampling bags are a low-cost, whole-air sampling device for high-level VOCs and permanent gases. Made of polyvinyl fluoride (PVF) polymer resin and with PP valve and septum fitting.

Supplier: Restek

Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass or 316 grade stainless steel.

Supplier: Restek

Deionisers, Maintenance kit for Parker HydroGen Mate DI water system

Supplier: Restek

These metering gas valves reduce pressure between sample cylinder and GC injector.

Supplier: Restek

This trap reduces the release of hazardous materials from the ECD vent into the lab.

Supplier: Restek

This mini regulator is suitable for natural gas and refinery gas standards.

Supplier: Restek

These liners are made up of borosilicate glass and intermediate polarity deactivated.

Supplier: Restek

Viva C18 are monomeric octadecylsilane columns, highly base deactivated wide pore packing that exhibits peak shape for a wide range of compounds from acidic through slightly basic. General purpose column for analyzing large molecules and biomolecules.

Supplier: Restek

Allure® Organic Acids columns provide enhanced retention and selectivity for polar organic acids, allowing the separation to be performed on a single 30 cm column.

Supplier: Restek

Organic Standard, Acrolein/Acrylonitrile, 2,000 μg/ml each in DI water, 1 ml/ampoule

Supplier: Restek

General purpose columns for solvent impurities, PCB congeners (e.g. Aroclor mixes), simulated distillation, arson accelerants, gases, natural gas odorants, sulphur compounds, essential oils, hydrocarbons, semivolatiles, pesticides, oxygenates.

Supplier: Restek

This mix contains 2-nitro-m-xylene, perylene-d12, pyrene-d10 and triphenylphosphate.

Supplier: Restek

These regulators are the standard for ultra high purity and corrosion resistant pressure regulation. They are more easily purged of atmospheric components compared to brass gas regulators. Stainless steel is especially useful in atmospheres of dry corrosive gases such as hydrogen.

Supplier: Restek

This split or splitless inlet adaptor fitting is suitable for capillary columns with internal diameter 0,53 mm. Makes column installation easy due to the nut protruding farther from the insulated injection port chamber.

Supplier: Restek

This backpressure regulator kit increases the versatility of Agilent 5890 GC by replacing the existing 0,06 bar (207 kPa) backpressure regulator and gauge with a 4,14 bar regulator.