13898 Results for: "MEMMERT"

Supplier: MEMMERT

Interior socket, ampacity 230 V/2.2 A, can be switched off with the On/Off switch, cannot be switched individually, moisture tight IP68, For: IPP260ecoplus

Supplier: MEMMERT

The range has natural and forced convection models with a temperature range up to 80 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

Accessories for Memmert UN/UNplus and UF/UFplus ovens

Supplier: MEMMERT

One year extension to warranty period, For: UF1060

Supplier: MEMMERT

Clip for 18×100 ml flask max., For: WTB35

Supplier: MEMMERT

Additional blank, formatted chip card (32 kB MEMoryCard XL), For: Maximum of 40 ramps, suitable for use with all Memmert units

Supplier: MEMMERT

Accessory stainless steel grid shelves.

Supplier: MEMMERT

Shelves, Perforated stainless steel shelf, For: IN450plus

Supplier: MEMMERT

May affect the temperature distribution in the chamber.

Supplier: MEMMERT

Flush-fit units

Supplier: MEMMERT

The ICH range of climatic chambers offers rapid and precise temperature control from 10 up to 60 °C with humidification from 10 to 80% RH. These compressor cooled units have stainless steel inner chamber and housing, ensuring long working life and easy cleaning. The ICH models have humidity control, ICH L models feature humidity control and light and ICH C models have humidity and an electronic CO₂ control with automatic zero setting, NDIR measurement system and auto-diagnostic system.

Supplier: MEMMERT

Climatic chamber

Supplier: MEMMERT

Stainless steel grid, For: IPS750

Supplier: MEMMERT

IFbw blanket warmer are suitable for warming non-sterile blankets and cloths, these are preheated to a precise temperature so they are readily available to help keep patients warm. This minimises the risk of complications such as wound infections, cardiovascular disorders, cardiac arrhythmia or vascular disorders. Thanks to the stainless steel chamber and outside surfaces, the units are easy to clean. Built-in safety features.

Supplier: MEMMERT

These ICHeco climate chamber are climate-friendly and powerful chamber for the stability testing in accordance with ICH and GMP in the areas of pharmaceuticals, cosmetics or food works.

Supplier: MEMMERT

Standard Incubator

Supplier: MEMMERT

Door with lock (safety lock), for SN75

Supplier: MEMMERT

Storage Cooled Incubators, IPS Series

Supplier: MEMMERT

The UF TS pass through ovens help to minimise contamination when transporting samples or components. They have an easy-to-clean interior, fast recovery times after opening the door as well as homogeneous temperature distribution, this oven is the perfect material lock between the grey room and the cleanroom in the electronics, semiconductor, medicine or pharmaceutical industries.

Supplier: MEMMERT

The range includes forced convection models with a temperature range up to 300 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

The range has natural and forced convection models with a temperature range up to 80 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

Subframe for Memmert UNpa ovens

Supplier: MEMMERT

Wall bracket (tubular frame for wall mounting), For: SF 30 Plus

Supplier: MEMMERT

Loop interface, for 4 - 20 mA current, temperature of a Pt100 sensor positioned flexibly in maximum 3 chamber, ICH L

Supplier: MEMMERT

Climatic chamber

Supplier: MEMMERT

Lids must be ordered at the same time as the bath as they can not be retrofitted.

Supplier: MEMMERT

Reinforced stainless steel grid, For: IPP110plus

Supplier: MEMMERT

Sets eco standards for cultivation below room temperature: Unmatched energy efficiency, excellent heat-up, cool-down and recovery times.

Supplier: MEMMERT

Climatic chamber

Supplier: MEMMERT

These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.